TTlock H3/H3F Fingerprint Door Access Control System Instruction Manual

1. Pengenalan

The TTlock H3/H3F is an advanced fingerprint door access control system designed for smart, convenient, safe, and efficient access management. It offers multiple unlocking methods and can be managed via the TTLock mobile application, providing a modern solution for various environments from personal homes to corporate offices.

Figure 1: TTlock H3 and H3F Access Control Systems

2. Ciri-ciri Utama

• Kaedah Membuka Kunci Berbilang: App, Password, RFID Card, Fingerprint (H3F only), and Gateway Remote Unlock.
• Pengurusan Apl: Generate time-limited passwords, manage users, and check attendance records remotely via the TTLock app.
• Perkhidmatan Awan: Data storage in cloud service for remote user management and history checking.
• IP67 Kalis Air: Designed for outdoor use, resistant to wind and rain.
• Keypad Protection: Keypad locks for 5 minutes after 5 incorrect passcode entries.
• Pseudo Passcode: Unlock by entering any digits, provided the last digits form the real passcode.
• Autokunci: Automatically locks within 5 seconds of unlocking.
• Pemantauan masa nyata: Administrator receives push notifications when a user unlocks via the app.
• Integrasi Rumah Pintar: Compatible with Amazon Alexa and Google Assistant (requires G2 Gateway).

Figure 2: Multiple Unlocking Methods

Rajah 3: Penarafan Kalis Air IP67

3. Spesifikasi

Figure 4: H3/H3F Smart Access Controller Specifications

Rajah 5: Dimensi Produk

4. Kandungan Pakej

• Access Control Host x1
• Tiub Pengembangan x4
• Fixed Bracket x1
• Screws: 4+1
• Manual x1
• Hexagon Screwdriver x1

Rajah 6: Aksesori yang Disertakan

5. Pemasangan

5.1 Gambarajah Pendawaian

Refer to the following diagram for proper wiring connections. Ensure all connections are secure before powering on the device.

Figure 7: General Wiring Diagram for Access Control System

Figure 8: Detailed Wiring Diagram

5.2 Langkah Pemasangan

1. Tebuk lubang untuk kabel: Drill a hole at an appropriate position to make space for the cable to connect to the power source.
2. Pasang plat pelekap: Remove the mounting plate from the access controller and fix it on the wall with 4 screws.
3. Sambungkan pendawaian: Cut off the connector of the cable, strip and connect the leads to appropriate ports of the power supply according to the illustration (Figure 8).
4. Pasang pengawal akses: Pasangkan pengawal akses ke dalam cangkuk dan pasangkannya pada plat pelekap dengan skru di bahagian bawah.

Figure 9: Installation Steps 1 & 2

Figure 10: Installation Step 4

6. Persediaan dan Tatarajah

6.1 Muat Turun Apl dan Berpasangan

Cari untuk "TTLOCK" in your mobile app store (Google Play Store for Android or Apple App Store for iOS) and download the application.

1. Ketik panel untuk menyalakannya dan mengaktifkan kunci.
2. On voice prompt "Please add Bluetooth Administrator", activate the APP.
3. Tap the "≡" icon on the upper left corner, tap "+Add Lock", select "Door Lock".
4. Ketik peranti yang ditunjukkan pada skrin. Tunggu beberapa saat, dan kemudian tambah dengan jayanya.

Notice: If fails, please shut off the APP and Bluetooth, then turn them on and try the above process again.

Figure 11: App Pairing Steps

Video 1: Demonstration of App Pairing, Passcode, Card, Fingerprint, and Remote Control Setup

6.2 Adding Passcodes

From the TTLock app, navigate to the 'Passcodes' section. You can generate permanent, timed, one-time, custom, or recurring passcodes. Follow the on-screen prompts to set the desired passcode and its validity period.

Figure 12: Generating Passcodes via Web Sistem

6.3 Adding RFID Cards

In the TTLock app, go to the 'Cards' section and select 'Add Card'. You can set the card's validity as permanent, timed, or recurring. Place the RFID card against the card reader sensor on the access control system when prompted by the app.

Figure 13: Adding an RFID Card

6.4 Adding Fingerprints (H3F only)

For H3F models, navigate to the 'Fingerprints' section in the app. Select 'Add Fingerprint' and follow the instructions to place and remove your finger from the sensor several times until successfully recorded.

Figure 14: Adding a Fingerprint

6.5 Adding Remote Controls

In the app, go to the 'Remote' section and select 'Add Remote'. Follow the app's instructions, which typically involve long-pressing a button on the remote control for a few seconds until an indicator light flashes, then confirming in the app.

6.6 G2 WiFi Gateway (Optional for Remote Control)

To enable remote door opening and control from anywhere via WiFi, you need to purchase and connect a G2 TTLock Bluetooth Gateway. The gateway bridges the Bluetooth connection of the access control system to your home WiFi network.

Figure 15: G2 WiFi Gateway Specifications

Figure 16: Remote Control with G2 WiFi Gateway

Figure 17: Tongtong Lock Gateway Remote Management

6.7 Integrasi Rumah Pintar

The system supports integration with Amazon Alexa and Google Assistant for voice control, provided a G2 Gateway is connected. Follow the instructions in the TTLock app under 'Work with' to link your smart home accounts.

Figure 18: Alexa and Google Home Integration

Figure 19: Amazon Alexa Setup Details

7. Operasi

7.1 Unlocking with the App

Open the TTLock app, ensure Bluetooth is enabled, and you are within range of the access control system. Tap the lock icon in the app to unlock. Hold to lock.

Figure 20: APP Bluetooth Unlock

7.2 Membuka kunci dengan Kod Laluan

Enter your registered passcode on the keypad followed by the '#' key to unlock. The keypad backlight will light up when touched.

7.3 Unlocking with RFID Card

Present a registered RFID card to the card reader area on the access control system to unlock.

7.4 Unlocking with Fingerprint (H3F only)

Place a registered finger on the fingerprint sensor to unlock.

7.5 Pembukaan Kunci Jauh

If a G2 WiFi Gateway is installed, you can remotely unlock the door from anywhere using the TTLock app.

8. Petua Pengguna

• For remote access and smart home integration (Alexa/Google Assistant), ensure you have a G2 TTLock Bluetooth Gateway.
• The system can store up to 100 fingerprints (H3F model) and 2000 RFID cards, providing ample capacity for various users.
• The TTLock app is the primary management tool; familiarize yourself with its features for optimal use.
• The system does not natively support Tuya or Smartlife apps; it operates with the dedicated TTLock app.

9. Penyelenggaraan

9.1 Pembersihan

Wipe the access control system's surface with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the acrylic panel.

9.2 Tetapan Lampu Latar

You can change the backlight settings using specific codes:

• Back lighting always on: *49#admin password#
• Back lighting always off: *49#admin password#0#

Figure 21: Changing Backlight Settings

9.3 Reset to Default Mode

To reset the device to its default factory settings, follow these wiring steps when the power is on:

1. Connect the blue wire (SW) to the purple wire (IN).
2. Connect SW and IN to the black wire (GND) for 3 seconds.
3. Disconnect the black wire (GND) on a beep.
4. Repeat step 2 and step 3 twice until 2 short beeps are heard.

Figure 22: Reset to Default Mode Wiring

10. Penyelesaian masalah

• App pairing fails: Ensure Bluetooth is enabled on your phone and the access control system is activated. Try restarting the app and Bluetooth.
• Alat kawalan jauh tidak berfungsi: Verify that the G2 WiFi Gateway is properly installed and connected to both the access control system and your WiFi network. Ensure the distance between the gateway and the smart lock is no more than 32 feet (10 meters).
• Pad kekunci tidak bertindak balas: Check the power supply. If the keypad is locked due to multiple incorrect entries, wait for 5 minutes.
• Cap jari tidak dikenali: Ensure your finger is clean and dry. Re-register the fingerprint if issues persist.
• Card not recognized: Ensure the RFID card is correctly registered in the app.

11. Waranti dan Sokongan

11.1 Waranti Terhad

Untuk sebarang kecacatan pada bahan dan/atau mutu kerja, pembeli asal produk boleh:

1. Kembalikan atau minta penggantian dalam masa 7 hari dari tarikh Invois.
2. Minta penggantian dalam tempoh 15 hari dari tarikh Invois.
3. Boleh minta repair percuma dalam 365 hari dari tarikh Invoice.

Waranti ini tidak melindungi kecacatan yang disebabkan oleh pengubahsuaian, pengubahan, penyalahgunaan atau penyalahgunaan fizikal produk.

11.2 Amaran FCC

Peranti ini mematuhi bahagian 15 Peraturan FCC. Pengendalian tertakluk kepada dua syarat berikut: (1) peranti ini tidak boleh menyebabkan gangguan berbahaya, dan (2) peranti ini mesti menerima sebarang gangguan yang diterima, termasuk gangguan yang boleh menyebabkan operasi yang tidak diingini.

Sebarang perubahan atau pengubahsuaian yang tidak disetujui secara tegas oleh pihak yang bertanggungjawab terhadap pematuhan dapat membatalkan hak pengguna untuk mengendalikan peralatan tersebut.

NOTA: Peralatan ini telah diuji dan didapati mematuhi had untuk peranti digital Kelas B, menurut Bahagian 15 Peraturan FCC. Had ini direka bentuk untuk memberikan perlindungan yang munasabah terhadap gangguan berbahaya dalam pemasangan kediaman. Peralatan ini menjana, menggunakan dan boleh memancarkan tenaga frekuensi radio dan, jika tidak dipasang dan digunakan mengikut arahan, boleh menyebabkan gangguan berbahaya kepada komunikasi radio.

Walau bagaimanapun, tiada jaminan bahawa gangguan tidak akan berlaku dalam pemasangan tertentu. Jika peralatan ini menyebabkan gangguan berbahaya kepada penerimaan radio atau televisyen, yang boleh ditentukan dengan mematikan dan menghidupkan peralatan, pengguna digalakkan untuk cuba membetulkan gangguan dengan satu atau lebih daripada langkah berikut:

• Arahkan semula atau letakkan semula antena penerima.
• Tingkatkan pemisahan antara peralatan dan penerima.
• Sambungkan peralatan ke dalam alur keluar pada litar yang berbeza daripada yang disambungkan kepada penerima.
• Rujuk pengedar atau juruteknik radio/TV yang berpengalaman untuk mendapatkan bantuan.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 20cm the radiator your body. Use only the supplied antenna.

11.3 Penafian

Kami terus mengoptimumkan produk apabila teknologi dan ciri baharu dibangunkan. Atas sebab ini, kami berhak untuk membuat perubahan pada produk tanpa notis awal.