EDUP SK0017 Starlink V2 150W 3-in-1 Step Up PoE Injector

1. Pengenalan

The EDUP SK0017 3-in-1 Starlink PoE Injector 150W is designed to provide seamless internet access for Starlink Standard Actuated V2 dishes, especially in mobile environments like RVs and outdoor setups. This device integrates the functions of a PoE injector, a DC step-up converter, and a power supply into a single, compact unit. It delivers 150W of power to reliably support your Starlink V2 Internet Satellite Dish and offers Gigabit network speed for fast data transmission.

The injector is built with robust protection features, including superior surge and ESD protection, ensuring reliability and longevity even in harsh environments. Its plug-and-play design simplifies connectivity to a Gigabit router or PC, maintaining optimal network speeds for your Starlink Gen 2 needs.

2. Maklumat Keselamatan

CAUTION: Utilizing incorrect cables or PoE injectors may result in irreversible damage to equipment.

• Pastikan vol input kuasatage berada dalam julat yang ditentukan (DC 9-36V).
• Do not expose the device to extreme temperatures or humidity outside of its operating range.
• Avoid physical damage to the device and its connectors.
• The device incorporates surge and ESD protection; however, proper grounding and installation practices are recommended for optimal safety and performance.

3. Kandungan Pakej

Sila tandai kotak untuk item berikut:

• 1 x EDUP SK0017 3-in-1 Step Up PoE Injector 150W for Starlink Gen2

4. Spesifikasi

The EDUP SK0017 PoE Injector features the following technical specifications:

5. Panduan Persediaan

Follow these steps to set up your EDUP SK0017 PoE Injector:

1. Connect Starlink Dish: Connect the original Starlink cable from your Starlink Standard Actuated V2 dish to the dedicated Starlink V2 Cable Port (POE Port) on the EDUP SK0017 PoE Injector.
2. Input Kuasa: Connect a DC 9-36V/150W power supply to the power input terminals (+ and -) on the device. Ensure correct polarity. The indicator light will turn on once power is supplied.
3. Sambungan Rangkaian: Use a straight-through shielded Ethernet cable to connect the LAN port on the EDUP SK0017 to your Gigabit router or PC.

For a visual guide, please watch the installation video:

6. Arahan Operasi

The EDUP SK0017 PoE Injector is designed for plug-and-play operation. Once properly connected as described in the Setup Guide, the device will automatically power your Starlink dish and provide network connectivity.

• Penunjuk Kuasa: A blue indicator light on the device confirms that it is receiving power and operating correctly.
• Kesambungan Rangkaian: The single LAN output ensures a direct and efficient connection to your Gigabit router or PC, maintaining optimal network speeds for your Starlink system.
• Keserasian: This device is specifically compatible with Starlink Standard Actuated V2 dishes. Refer to the compatibility chart below to ensure your Starlink terminal model is supported.

7. Penyelenggaraan

To ensure the longevity and optimal performance of your EDUP SK0017 PoE Injector:

• Pastikan peranti bersih dan bebas daripada habuk dan serpihan. Gunakan kain lembut dan kering untuk pembersihan.
• Pastikan pengudaraan yang mencukupi di sekeliling unit untuk mengelakkan terlalu panas.
• Periksa semua sambungan kabel secara berkala untuk memastikan ia selamat dan bebas daripada kerosakan.
• Elakkan daripada mendedahkan peranti kepada air atau kelembapan berlebihan.
• Simpan peranti di tempat yang sejuk dan kering apabila tidak digunakan.

8. Penyelesaian masalah

If you encounter issues with your EDUP SK0017 PoE Injector, try the following steps:

• Tiada Lampu Penunjuk Kuasa:
  - Check the power supply connection to the device. Ensure the DC 9-36V/150W power source is active and correctly wired to the terminals with proper polarity.
  - Verify the power supply itself is functioning.
• Tiada sambungan internet:
  - Confirm that the Starlink dish is properly connected to the PoE port.
  - Check the Ethernet cable connection between the LAN port and your router/PC. Ensure it is a straight-through shielded Ethernet cable.
  - Restart your router and the Starlink dish.
  - Ensure your Starlink dish is receiving a clear view dari langit.
• Kelajuan Rangkaian Perlahan:
  - Verify that all cables are securely connected.
  - Ensure your router and connected devices support Gigabit Ethernet speeds.
  - Check for any obstructions to the Starlink dish's view.
• Peranti Terlalu Panas:
  - Ensure the device is placed in a well-ventilated area and not covered.

If problems persist after following these steps, please contact EDUP customer support.

9. Petua Pengguna

• Fleksibiliti Sumber Kuasa: The wide DC input range (9-36V) makes this injector highly versatile for various power sources in RVs, such as 12V or 24V battery systems. Ensure your power source can deliver the required 15A for 150W output.
• Keluaran Voltage: While Starlink V2 typically operates at 48V, this injector provides a maximum output of 48V/3A. This is sufficient for the Starlink Standard Actuated V2 dish.
• Kualiti Kabel: Always use high-quality, shielded Ethernet cables for optimal performance and to minimize interference, especially in outdoor or mobile environments.
• Perlindungan Alam Sekitar: The built-in surge and ESD protection are crucial for outdoor use. However, consider additional external surge protectors for your entire RV electrical system for enhanced safety during thunderstorms.

10. Waranti dan Sokongan

EDUP products typically come with a 1-year warranty from the date of purchase. For specific warranty details and terms, please refer to the documentation provided with your product or contact EDUP customer support.

For technical assistance, troubleshooting, or warranty claims, please contact EDUP Official Store customer service. Keep your purchase receipt or order number handy when contacting support.