XinJE TG765 Series Human Machine Interface (HMI) User Manual

1. Pengenalan

This manual provides essential information for the installation, operation, and maintenance of your XinJE TG765 Series Human Machine Interface (HMI). The TG765 Series includes models such as TG765-MT and TG765S-XT, designed for industrial control and automation applications. This 7-inch touch panel offers a user-friendly interface for monitoring and controlling various processes.

2. Persediaan dan Pemasangan

Proper installation is crucial for the reliable operation of your HMI. Follow these guidelines:

2.1 Pemasangan Panel

The TG765 Series HMI is designed for panel mounting. Ensure you prepare the correct cutout size in your control panel.

• Dimensi Produk: 200.4mm (W) x 146.9mm (H) x 48.5mm (D)
• Open Hole Dimension (Cutout Size): 192.0mm (W) x 138.5mm (H)

2.2 Sambungan Elektrik

Connect the HMI to a stable DC24V power supply. The input voltage range is DC22V to DC26V.

• Input Kuasa: Connect DC24V to the designated terminal block.
• PLC Port: Use the RS232/RS422/RS485 ports for communication with PLCs and other industrial devices.
• Download Port: The USB-B port (compatible with USB2.0) is used for program download.
• Port USB 1/2: USB-A ports (compatible with USB2.0) are available for flash disk connections (supported on UT/ET models).

2.3 Persediaan Perisian

Before operating the HMI, you will need to download and install the appropriate programming software and drivers. Refer to the official XinJE website for the latest software and detailed programming manuals.

Download Programming Manuals and Software

3. Arahan Operasi

The TG765 Series HMI features a 7-inch 4-wire resistor mode touch screen for intuitive interaction. Once programmed and connected, the HMI will display the configured interface for your application.

3.1 Operasi Asas

• Hidupkan kuasa: Ensure the HMI is correctly wired to a DC24V power source. The device will power on automatically.
• Skrin Sentuh: Interact with the displayed elements using your finger or a stylus.
• Muat Turun Program: Use the USB-B download port to transfer your HMI project files from your PC to the device.

3.2 Advanced Features and Networking

The TG765 Series supports various communication protocols and networking modes, allowing for flexible integration into complex industrial environments. For detailed information on configuring communication with PLCs, setting up network connections, and utilizing advanced functions, please consult the comprehensive programming manuals available on the XinJE webtapak.

4. Penyelenggaraan

To ensure the longevity and optimal performance of your HMI, follow these maintenance recommendations:

• Pembersihan: Gently wipe the touch screen and casing dengan lembut, damp kain. Elakkan menggunakan pembersih atau pelarut yang kasar yang boleh merosakkan permukaan.
• Keadaan Persekitaran: Operate the HMI within the specified environmental ranges:
  • Suhu Operasi: 0°C hingga 50°C
  • Suhu penyimpanan: -20°C hingga 69°C
  • Kelembapan Operasi: 10% RH ke 90% RH (bukan pemeluwapan)
• Kualiti Udara: Ensure the operating environment is free from corrosive gases.
• penyejukan: The HMI uses natural air cooling. Ensure adequate ventilation around the unit.
• Perlindungan: The front cover of the HMI is rated IP65, providing protection against dust and low-pressure water jets.

5. Penyelesaian masalah

If you encounter issues with your HMI, consider the following basic troubleshooting steps:

• Tiada Kuasa: Verify that the DC24V power supply is connected correctly and providing the specified voltage. Check all wiring connections.
• Skrin Tidak Responsif: Ensure the HMI is powered on and the screen is not physically damaged. If the screen is frozen, try cycling the power.
• Ralat Komunikasi: Check the communication cable connections to the PLC or other devices. Verify the communication settings in your HMI project and PLC program.
• Isu Perisian: If problems arise during programming or project transfer, ensure you are using the correct and latest version of the programming software and drivers from the XinJE webtapak.

For more complex issues, refer to the detailed troubleshooting sections in the official programming and user manuals, or contact technical support.

6. Spesifikasi

Below are the key specifications for the XinJE TG765 Series HMI (TG765-MT and TG765S-XT models):

7. Petua Pengguna

• Always refer to the latest programming software and manuals from the official XinJE website for the most up-to-date information and features.
• When designing your HMI project, consider optimizing graphics and scripts for efficient performance, especially for complex applications.
• Regularly back up your HMI project files untuk mengelakkan kehilangan data.
• Ensure proper grounding of the HMI and connected equipment to minimize electrical interference.

8. Waranti dan Sokongan

For warranty information, technical assistance, or inquiries regarding other products, please contact your authorized distributor or the manufacturer directly.

Pengeluar: XinJE
Pengedar: Hengnais (Guangzhou) Trading Co., Ltd.

You can find additional resources and contact information on the official XinJE webtapak:

XinJE Official Webtapak (Muat turun)