Manual Pengguna Papan Induk Aigo X99M D4

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of the Aigo X99M D4 Motherboard. This Micro-ATX motherboard is designed to support Intel LGA 2011-3 socket processors, including Intel Core i7 and Xeon E5 V3/V4 series, and features four DDR4 memory slots with support for up to 128GB RAM. It is equipped with an Intel X99 chipset, dual NVMe M.2 slots, and multiple expansion interfaces for a versatile computing experience.

2. Maklumat Keselamatan

• Sentiasa putuskan sambungan bekalan kuasa sebelum memasang atau mengeluarkan sebarang komponen.
• Pakai tali pergelangan tangan anti-statik untuk mengelakkan kerosakan nyahcas elektrostatik (ESD) pada komponen.
• Kendalikan papan induk di tepinya untuk mengelak daripada menyentuh komponen sensitif.
• Pastikan pengudaraan yang betul dalam bekas komputer anda untuk mengelakkan terlalu panas.
• Jangan dedahkan papan induk kepada kelembapan atau suhu yang melampau.
• The appearance and functionality of the motherboard should be checked immediately upon receipt. Do not install the motherboard into a computer case if any damage is observed, as installation may be considered artificial damage.

3. Spesifikasi

The Aigo X99M D4 Motherboard offers the following technical specifications:

4. Panduan Persediaan

Follow these steps to properly install your Aigo X99M D4 Motherboard and its components.

4.1 Motherboard Layout and Connectors

Familiarize yourself with the motherboard's layout and various connectors using the diagram below.

4.2 Pemasangan CPU

• Carefully open the LGA 2011-3 CPU socket lever.
• Align the CPU (Intel Core i7 or Xeon E5 V3/V4 series) with the socket, ensuring the triangular mark on the CPU matches the mark on the socket.
• Perlahan-lahan letakkan CPU ke dalam soket tanpa memaksanya.
• Tutup tuil soket untuk mengunci CPU.
• Pasang penyejuk CPU mengikut arahan pengeluarnya.

4.3 Pemasangan Memori (RAM).

The motherboard supports four DDR4 memory modules for quad-channel operation, with a maximum capacity of 128GB.

• Buka klip di kedua-dua hujung slot memori DDR4.
• Jajarkan modul memori dengan slot, pastikan takuk pada modul sepadan dengan kunci dalam slot.
• Tekan ke bawah dengan kuat pada kedua-dua hujung modul memori sehingga klip terpasang pada tempatnya.
• For optimal performance, install memory modules in pairs or quads to utilize quad-channel architecture.

Note: Server RAM (REG ECC) and Desktop RAM have compatibility differences. Ensure you use compatible RAM for your system configuration.

4.4 Storage Device Installation (M.2 NVMe & SATA)

The motherboard features two M.2 NVMe slots and six SATA 3.0 ports.

• **M.2 NVMe SSD:** Insert the M.2 SSD into the slot at an angle, then gently push it down and secure it with the provided screw.
• **SATA Drives:** Connect SATA data cables from your SSDs/HDDs to the SATA 3.0 ports on the motherboard. Connect power cables from your power supply to the drives.

4.5 Pemasangan Kad Pengembangan (PCIe)

The motherboard includes one PCIe x16 slot, one PCIe x4 slot, and one PCIe x1 slot.

• Align your graphics card or other PCIe expansion card with the appropriate slot.
• Press down firmly until the card is fully seated in the slot and the retention clip (if present) engages.
• Secure the card to the computer case with a screw.

4.6 Sambungan Kuasa

• Sambungkan penyambung kuasa ATX 24-pin daripada bekalan kuasa anda ke soket kuasa utama pada papan induk.
• Connect the 8-pin ATX 12V power connector (CPU power) from your power supply to the corresponding socket near the CPU.
• Ensure your power supply is at least 500W to adequately support this motherboard and its components.

4.7 Front Panel and Other Connectors

• Connect the front panel headers (Power LED, HDD LED, Power SW, Reset SW) from your computer case to the corresponding pins on the motherboard (refer to Figure 4.1 for locations).
• Connect USB 2.0 and USB 3.0 front panel cables to the respective headers.
• Connect the front audio cable to the F_AUDIO header.
• Connect any case fans to the available fan headers.
• Install the CMOS battery if it was removed for shipping.

5. Arahan Operasi

5.1 But Pertama dan Persediaan BIOS

• Selepas memasang semua komponen, sambungkan monitor, papan kekunci dan tetikus anda.
• Power on your system. During startup, press the designated key (usually DEL or F2) to enter the AMI EFI BIOS setup utility.
• In the BIOS, you can configure boot order, system time, CPU settings, memory settings (including enabling XMP for overclocking if supported by your RAM), and other system parameters.
• Simpan perubahan dan keluar dari BIOS untuk meneruskan boot ke media pemasangan sistem pengendalian anda.

5.2 Pemasangan Pemandu

After installing your operating system, install the necessary drivers for the chipset, LAN (Realtek RTL8111), audio, and any other integrated components. These drivers are typically provided on a CD with the motherboard or can be downloaded from the manufacturer's webtapak.

5.3 Multi-Tasking and Gaming

The Aigo X99M D4 motherboard, with its authentic X99 chipset and four-channel memory support, is designed for stable multi-tasking and high-efficiency performance. It is suitable for various applications including gaming, audio/video editing, office work, 3D modeling, and graphic design.

6. Penyelenggaraan

• **Cleaning:** Regularly clean dust from inside your computer case and motherboard components using compressed air. Ensure the system is powered off and unplugged before cleaning.
• **BIOS Updates:** Check the manufacturer's website periodically for BIOS updates. Update the BIOS only if necessary and follow the instructions carefully to avoid system instability.
• **Component Checks:** Periodically check all cable connections (power, data, front panel) to ensure they are secure.
• **Thermal Management:** Ensure CPU cooler and case fans are functioning correctly to maintain optimal temperatures. The motherboard features a metallic heat dissipation armor for stable power delivery.

7. Penyelesaian masalah

• **No Power/System Fails to Boot:**
  • Pastikan semua kabel kuasa (ATX 24-pin, ATX 8-pin 12V) disambungkan dengan kukuh.
  • Verify that your power supply unit (PSU) is sufficient. This motherboard requires at least a 500W brand power supply.
  • Check front panel power switch connections.
• **No Display Output:**
  • Ensure your graphics card is properly seated in the PCIe x16 slot and has adequate power.
  • Periksa sambungan kabel monitor.
  • Verify CPU and RAM are correctly installed.
• **Memory (RAM) Issues:**
  • Ensure RAM modules are fully seated in their slots.
  • Confirm that the installed RAM type (DDR4) is compatible. Note that server RAM (REG ECC) may have compatibility issues with desktop RAM.
  • Try booting with one RAM stick at a time to isolate a faulty module.
• **System Instability/Crashes:**
  • Check CPU and GPU temperatures. Ensure cooling solutions are working.
  • Verify all drivers are correctly installed and up to date.
  • Pastikan bekalan kuasa anda memenuhi wat minimumtage keperluan.
• **Cosmetic Variations:**
  • The color of the bottom plate of the slot may vary between manufacturing batches. This is a cosmetic difference and does not affect the product's functionality or performance.

8. Petua Pengguna

• **Power Supply:** Always use a powerful and reliable power supply, at least 500W, to ensure system stability, especially when using high-performance CPUs and graphics cards.
• **RAM Compatibility:** Be mindful of RAM compatibility. While the motherboard supports DDR4, ensure that if you are using ECC memory, it is compatible with your CPU and other components. Mixing server (REG ECC) and desktop RAM is generally not recommended due to potential compatibility issues.
• **Drivers:** After OS installation, download and install the latest drivers for your chipset, LAN, and audio from the official Aigo support website or the respective component manufacturers (e.g., Realtek for LAN).
• **RAM Overclocking:** The motherboard supports four-channel DDR4 and indicates support for overclocking. If you plan to overclock your RAM, ensure your memory modules are rated for higher speeds and configure settings carefully in the BIOS. CPU overclocking for unlocked CPUs like i7 6800k is not explicitly stated as supported for this specific motherboard model, which is primarily designed for Xeon E5 V3/V4 series.

9. Waranti dan Sokongan

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Aigo webtapak. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.