pengenalan
This manual provides detailed instructions for the Okin Model RF.27.19.02 Remote Hand Control Handset. This remote is designed as a direct replacement for compatible GhostBed adjustable beds. Please read this manual thoroughly before setup and operation to ensure correct usage and to maximize the lifespan of your device. This remote is specifically for GhostBed adjustable beds and is not compatible with other brands.
Arahan Persediaan
1. Pemasangan Bateri
- Cari petak bateri di belakang alat kawalan jauh.
- Luncurkan penutup bateri ke bawah untuk membukanya.
- Insert two (2) AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment. Batteries are not included and must be purchased separately.
- Gantikan penutup bateri dengan menggelongsorkannya semula ke kedudukannya sehingga ia berbunyi dengan selamat.
2. Memadankan Alat Kawalan Jauh
To ensure proper communication with your adjustable bed, the remote control may need to be paired. The exact pairing procedure can vary slightly depending on your specific GhostBed adjustable bed model. Generally, the steps involve:
- Ensure the adjustable bed is plugged into a working power outlet.
- Locate the control box under your adjustable bed. There is usually a small button on the control box, often labeled "PAIR" or "LEARN".
- Press and hold the "PAIR" or "LEARN" button on the control box for a few seconds until an indicator light (if present) starts flashing.
- Within 10 seconds, press and hold the "PAIR" button on your Okin RF.27.19.02 remote control (located at the top right of the remote, next to the lock icon).
- Release the button on the remote when the indicator light on the control box stops flashing or when the bed responds to a command.
- Test the remote's functions to confirm successful pairing.
If pairing is unsuccessful, repeat the steps. If issues persist, consult your GhostBed adjustable bed's original manual for specific pairing instructions or contact GhostBed customer support.
Arahan Operasi
Familiarize yourself with the buttons on your Okin RF.27.19.02 remote control. A visual guide is provided below:
Fungsi Butang:
- Kunci/Buka Kunci: Locks or unlocks the remote to prevent accidental adjustments.
- PASANGAN: Used for pairing the remote with the adjustable bed's control box (refer to Setup Instructions).
- M (Ingatan): Saves or recalls a custom bed position. Consult your bed's manual for specific memory programming steps.
- ZG (Zero Gravity): Adjusts the bed to the Zero Gravity position, which elevates the head and feet to promote circulation and relieve pressure.
- TV: Adjusts the bed to a comfortable position for watching TV.
- Kepala Atas/Bawah: Raises or lowers the head section of the bed.
- Kaki Atas/Bawah: Raises or lowers the foot section of the bed.
- Flat: Mengembalikan katil ke kedudukan yang rata sepenuhnya.
- MASSAGE (10min, 20min, 30min): Activates the massage function for the selected duration.
- MASSAGE (Head, Foot): Controls the massage intensity or pattern for the head or foot section.
- MASSAGE (MODE): Cycles through different massage modes or patterns.
- HIDUP/MATI: Powers the massage function on or off.
- PEMASA: Sets a timer for the massage function.
Press and hold the desired adjustment buttons until the bed reaches your preferred position. Release the button to stop movement.
Penyelenggaraan
Penggantian Bateri
When the remote's performance degrades or the indicator light (if any) signals low battery, replace the AAA batteries. Follow the battery installation steps in the "Setup Instructions" section.
Pembersihan
Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners, aerosols, or harsh chemicals, as these can damage the remote's electronics or finish.
Penyimpanan
Store the remote in a dry place away from extreme temperatures and direct sunlight. If storing for an extended period, it is recommended to remove the batteries to prevent leakage.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Remote not responding to commands. |
|
|
| Bed only performs some functions. |
|
|
| Fungsi urutan tidak berfungsi. |
|
|
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | RF.27.19.02 |
| Brand (Remote Manufacturer) | Okin |
| Jenis Motor | Motor DC |
| Sumber Kuasa | 2 x Bateri AAA (tidak termasuk) |
| Keserasian | GhostBed Adjustable Beds (specific models) |
| Pensijilan | UL |
| Tarikh Pengeluaran | 38/22 |
| Versi perisian | 3.0 |
| ID FCC | PCU-RF27 |
| IC | 21319-RF27 |
Petua pengguna
- Always verify the model number (RF.27.19.02) on your existing remote or bed's control box before purchasinpenggantian ga untuk memastikan keserasian.
- Keep a spare set of AAA batteries on hand to avoid interruptions in bed operation.
- If your bed has a "Flat" button on the base or control box, you can use it as an alternative to the remote if the remote is lost or not functioning.
- For optimal signal, ensure there are no large metal objects or other electronics directly between the remote and the bed's control box.
Waranti dan Sokongan
For specific warranty information regarding your Okin Model RF.27.19.02 Remote Hand Control Handset, please refer to the documentation provided at the time of purchase or contact the seller directly. Warranty terms may vary.
If you encounter issues that cannot be resolved using the troubleshooting guide, or if you require further assistance, please contact the retailer from whom you purchased this product. For issues related to your GhostBed adjustable bed itself, please contact GhostBed customer support.
