M-VAVE WP-8 Wireless Guitar System User Manual

1. Produk Lebihview

The M-VAVE WP-8 is a 2.4GHz wireless guitar system designed for musical instruments, offering low latency, stable transmission, and high-resolution audio. It includes a transmitter and a receiver, along with a portable charging box.

Figure 1: M-VAVE WP-8 Wireless Guitar System components.

Figure 2: Key features of the WP-8 Wireless Guitar System.

2. Spesifikasi

Figure 3: Compatibility with 3.5mm and 6.35mm plugs for various instruments.

3. Persediaan dan Operasi

3.1 Caj Permulaan

Before first use, ensure both the Transmitter and Receiver are fully charged. If the battery indicator lights up red when not plugged in, it means the battery is low and requires charging.

3.2 Kaedah Pengecasan

The WP-8 offers two charging methods:

1. Using the Charging Box (if included): Place the Transmitter and Receiver into the charging box. They will automatically charge if the charging box has power. A light on the unit indicates charging.
2. Pengecasan USB-C Terus: Connect a Type-C USB cable directly to the charging port on the Transmitter or Receiver. The battery indicator will light red when charging and turn off when fully charged.

Figure 4: Charging units via the portable charging box.

Figure 5: Product parameters and usage instructions.

3.3 Hidupkan/Mati Kuasa

Locate the power switch on the side of both the Transmitter and Receiver. Slide the switch to turn the units on or off.

3.4 Berpasangan

After the first power-up, the Transmitter and Receiver should automatically pair. If automatic pairing does not occur, follow these steps for manual pairing:

1. Turn on both the Transmitter and Receiver.
2. Press and hold the pairing buttons on both the Receiver and Transmitter simultaneously for 3 seconds. The light on the button will flash.
3. Once the pairing indication light turns solid green, the products are successfully paired.

3.5 Connecting to Instruments and Amppenghidup

The 190° rotating device allows for flexible connection to most electric instruments. Connect the Transmitter to your electric guitar, bass, electric wind instrument, electric violin, electric drum, electric Chinese zither, or other electric instrument. Connect the Receiver to your amppembesar atau pembesar suara.

Figure 6: Connecting the Transmitter to a guitar and Receiver to an amplebih hidup.

3.6 Multiple Device Usage

The WP-8 system supports using up to 4 Transmitters and 4 Receivers simultaneously in the same environment. For one Transmitter to send a signal to multiple Receivers:

1. Turn on all Receivers.
2. Press and hold the pairing buttons on all Receivers simultaneously for 3 seconds until the lights flash.
3. Quickly press the pairing button on the Transmitter, then turn it on.
4. Press and hold the pairing button on the Transmitter for 3 seconds.
5. When the pairing indication lights on all units turn solid green, all products are paired.

4. Penyelenggaraan

• Pastikan peranti bersih dengan mengelapnya dengan kain lembut dan kering.
• Elakkan daripada mendedahkan peranti kepada suhu yang melampau, kelembapan atau cahaya matahari langsung.
• Jangan cuba membuka atau membaiki peranti sendiri, kerana ini akan membatalkan jaminan.
• Simpan peranti di tempat yang sejuk dan kering apabila tidak digunakan.

5. Penyelesaian masalah

5.1 Peranti Tidak Dihidupkan

If the device has not been used for a long time or the battery is low and not charged promptly, the battery may enter a protection mode. To resolve this, charge the battery to activate it.

5.2 Tiada Keluaran Bunyi

Check if the wireless system is currently paired. If the pairing indicator is flashing, you need to re-pair the Transmitter and Receiver as described in Section 3.4.

5.3 Strange Noise During Use

• Interference/Distance: Strong electrical interference, excessive transmission distance, or too many obstacles can cause noise. Minimize the transmission distance and keep away from electrical interference sources.
• Bateri Rendah: Low battery on either your instrument or the wireless system can cause noise. Check the battery levels of all connected devices.
• Speaker Grounding: Ensure your speaker has a secure ground connection. Lack of proper grounding can lead to current noise.

5.4 Isu Pengecasan

• Perlindungan Bateri: If the battery is in a low power state, it may enter protection status. Charge for at least 10 minutes to initiate charging.
• Cable/Port Check: Verify that the charging cable is working correctly and that the charging jack on the device is not damaged.

5.5 Transmitter Power Consumption

It is normal for the Transmitter to consume power faster than the Receiver. The Transmitter actively sends signals, requiring more power, while the Receiver primarily accepts signals.

6. Petua Pengguna

• Always ensure both the transmitter and receiver are fully charged before a performance or practice session to prevent unexpected interruptions or noise.
• If you experience any signal dropouts or interference, try reducing the distance between the transmitter and receiver and moving away from other electronic devices.
• When using multiple receivers with a single transmitter, follow the specific pairing instructions carefully to ensure all units are correctly connected.
• Regularly check the battery indicators on both units to monitor power levels.

7. Waranti dan Sokongan

Untuk maklumat waranti, sokongan teknikal atau pertanyaan perkhidmatan, sila hubungi peruncit anda atau pengilang secara terus. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.