1. Pengenalan
The Flipsky VX3 Pro is a state-of-the-art 2.4G wireless remote controller engineered for high-performance electric water sports and skateboarding applications, including Efoil, Esurf, and ESK8. This manual provides essential information for the safe and effective operation, setup, and maintenance of your VX3 Pro controller.
2. Ciri-ciri Utama
- Paparan Super Jernih 1.8 inci: Provides comprehensive telemetry data.
- Advanced Telemetry: Displays GPS, motor power, real-time MOS tube temperature, and throttle progress bar.
- Keserasian Luas: Compatible with Flipsky FSESC/FTESC and other VESC and Non-VESC systems.
- Operasi Mod Dwi: Seamless switching between ESK8 (Electric Skateboard) and E-surf (Electric Surfboard) modes.
- Kawalan Pelayaran: Dedicated cruise speed control function for E-surf mode.
- High Waterproof Rating: IP67 for reliable performance in wet conditions.
- Jangka Hayat Bateri: Equipped with a 1500mAh remote battery.
- ESC Failure Reporting: Detects and reports potential ESC failures for timely replacement.
- Flexible Control Modes: Supports PPM and UART controller modes.
- Pengecasan yang Mudah: Features wireless magnetic charging.
- Integrated Receiver: VX3 Pro Remote includes a receiver (supports Flipsky non-VESC).
- Firmware Boleh Ditingkatkan: Supports online firmware upgrades.
- Enhanced Communication: Utilizes SX1280 communication module.
- Improved Microcontroller: Features GD32F303CGT6 transmitter microcontroller.
- FTESC ESC UART Protocol: Added support for FTESC ESC UART control protocol.
- Pelbagai Pilihan Kawalan: Supports UART, PPM, and UART&PPM control modes.
- Intuitive Function Switching: Joystick-based up and down switching control.
- Gear Lock Function: For added safety and control.
- Penggera Bateri Rendah: Alerts for low battery levels on both skateboards and surfboards.
- Total Mileage Display: Menjejaki jumlah jarak yang dilalui.
- Tetapan Boleh Disesuaikan: Adjustable wheel diameter (up to 999mm) and default startup gear.
- Configurable Cruise/Reverse: Option to enable/disable cruise mode and reverse function.
- Prestasi Dioptimumkan: Faster screen refresh rate and data display.
3. Spesifikasi
| Atribut | Perincian |
|---|---|
| Skrin Paparan | 1.8-inch, Super Clear |
| Data Telemetri | GPS, Motor Power, MOS Tube Temp, Throttle Progress, Real-time Speed, Single Mileage, ESC Real-time Current, ESC Temperature, Putter Throttle Percentage |
| Keserasian | Flipsky FSESC/FTESC, VESC, Non-VESC |
| Mod Pengendalian | ESK8, E-surf (with Cruise Control) |
| Penilaian Kalis Air | IP67 |
| Remote Battery Capacity | 1500mAh |
| Mod Pengawal | PPM, UART, UART&PPM |
| Kaedah Pengecasan | Pengecasan Magnet Tanpa Wayar |
| Modul Komunikasi | SX1280 |
| Transmitter Microcontroller | GD32F303CGT6 |
| bahan | plastik |
| Bateri Termasuk | ya |
| Umur Disyorkan | 14+ tahun |
| Pensijilan | CE, RoHS |
| asal usul | Tanah Besar China |
4. Kandungan Pakej
The VX3 Pro controller package typically includes the following items:
- Flipsky VX3 Pro Remote Controller
- Modul Penerima
- Pad Pengecasan Magnet Tanpa Wayar
- Kabel Pengecas USB
- Receiver Connection Cables (PPM/UART)
- Tali Pergelangan Tangan
- Membawa Sarung
5. Panduan Persediaan
5.1 Alat Kawalan Jauh Overview
Familiarize yourself with the buttons and display on your VX3 Pro remote controller:
- Skrin Paparan 1.8 inci: Shows telemetry data.
- Brake Trigger: Controls braking.
- Pencetus Pendikit: Mengawal pecutan.
- Butang Hidup / Mati: Turns the remote on or off.
- Butang Tetapan: Accesses menu and settings.
- Charging Sign: Menunjukkan status pengecasan.
- Hang Strap: For securing the remote.
5.2 Pendawaian Penerima
The VX3 Pro receiver supports both UART and PPM control modes. Choose the appropriate wiring based on your ESC (Electronic Speed Controller).
5.2.1 UART Control Mode
UART control mode supports one-key reverse function and data display, applicable for ESCs based on VESC and FTESC controllers.
Connect the receiver to your VESC/FTESC as follows:
- Receiver VTX1 to VESC RX
- Receiver VRX1 to VESC TX
- Receiver GND to VESC GND
- Receiver 5V to VESC 5V
- BAT+ for battery level detection (optional, connect to main battery positive)
5.2.2 PPM Control Mode
PPM control mode operates without positive and reverse switching functions and is applicable to all ESCs.
Connect the receiver to your ESC using either PPM1 or PPM2:
- Connect Receiver PPM1 or PPM2 to the corresponding PPM input on your ESC.
- Connect Receiver GND to ESC GND.
- Connect Receiver 5V to ESC 5V.
- BAT+ for battery level detection (optional, connect to main battery positive).
For more detailed wiring, refer to the comprehensive diagram below:
5.3 Gandingan Awal
Typically, the remote and receiver come pre-paired. If re-pairing is necessary, consult the Flipsky support resources for specific instructions.
6. Arahan Operasi
6.1 Hidupkan/Mati Kuasa
Press and hold the Power On/Off button on the remote to turn it on or off.
6.2 Screen Display Introduction (ESK8 Mode)
The 1.8-inch display provides real-time information. Below is an overview of the display in ESK8 mode:
- Mod UART: Indicates communication protocol.
- Bateri jauh: Paras bateri alat kawalan jauh.
- Esk8 battery: Electric skateboard battery level.
- Receiver signal: Strength of the wireless connection.
- Speed mode (H/M/L): High, Medium, or Low speed setting.
- Motor steering: Direction of motor rotation.
- Kelajuan masa nyata: Kelajuan semasa dalam km/j atau mph.
- Single mileage: Distance traveled in the current session.
- ESC real-time current: Current draw from the ESC.
- ESC temperature: Real-time temperature of the ESC.
- Putter throttle percentage: Current throttle input.
6.3 Mode Switching (ESK8 / E-surf)
The remote allows free switching between ESK8 and E-surf modes. Use the joystick (up and down switching control) to navigate through the menu and select your desired mode. Refer to the remote's on-screen menu for specific navigation.
6.4 Cruise Speed Control (E-surf Mode)
In E-surf mode, the cruise speed control function can be activated. Consult the remote's menu settings to enable and adjust this feature.
6.5 Gear Lock Function
The gear lock function provides an additional layer of control. Activate and manage this feature through the remote's settings menu.
6.6 Menyesuaikan Tetapan
Access the settings menu using the Setting Button to adjust various parameters:
- Diameter roda: Can be set up to 999mm for accurate speed and mileage readings.
- Default Gear: Modify the default gear at startup.
- Cruise Mode/Reverse Function: Enable or disable these functions as needed.
7. Penyelenggaraan
7.1 Mengecas Alat Kawalan Jauh
The VX3 Pro remote features wireless magnetic charging. Place the remote on the provided charging pad to initiate charging. Ensure the charging sign on the remote indicates proper connection.
7.2 Penjagaan Kalis Air
With an IP67 waterproof rating, the remote is protected against immersion in water up to 1 meter for 30 minutes. However, it is recommended to rinse the remote with fresh water after use in saltwater environments and ensure it is dry before charging or storing.
7.3 Kemas Kini Perisian Tegar
The remote supports online firmware upgrades. Periodically check the Flipsky official website or app for the latest firmware versions to ensure optimal performance and access to new features. Follow the provided instructions carefully during the upgrade process.
8. Penyelesaian masalah
- ESC Failure Report: The remote can detect and report possible failures of the ESC. If an ESC failure is reported, immediately cease operation and inspect your ESC for issues. Consult your ESC's manual or Flipsky support for diagnostic steps.
- Penggera Bateri Rendah: The remote will provide a low battery alarm for both the remote itself and the connected skateboard/surfboard battery. Ensure both are adequately charged before use.
- No Display/Unresponsive: Ensure the remote is charged. Try restarting the remote. If issues persist, contact support.
- Isu Ketersambungan: Ensure the receiver is correctly wired and powered. Re-attempt pairing if necessary. Check for obstructions or interference.
9. Petua Pengguna
- Pemeriksaan Keserasian: While the VX3 Pro is broadly compatible with VESC and Non-VESC systems, always verify compatibility with your specific Efoil or Esurf model (e.g., Takuma) before extensive use.
- Kemas Kini Perisian Tegar Biasa: Keep your remote's firmware updated to benefit from performance improvements and new features.
- Lampiran Selamat: Always use the provided wrist strap to prevent accidental drops, especially during water sports.
- Pengurusan Bateri: Pay attention to the low battery alarms for both the remote and your vehicle to avoid unexpected power loss during operation.
10. Amaran Keselamatan
⚠ AMARAN: Produk ini boleh mendedahkan anda kepada bahan kimia termasuk phthalates (DEHP), yang diketahui oleh Negeri California boleh menyebabkan kanser dan kecacatan kelahiran atau kemudaratan reproduktif lain. Untuk maklumat lanjut pergi ke www.P65Warnings.ca.gov.
Always operate your electric skateboard or surfboard responsibly and in accordance with local laws and regulations. Wear appropriate safety gear, including helmets and protective clothing, when operating any electric vehicle.
11. Waranti dan Sokongan
For warranty information, technical support, or service inquiries, please contact Flipsky customer service or visit their official webtapak. Simpan resit pembelian anda sebagai bukti pembelian.
