M5Stack K010-V11

M5Stack Core2 ESP32 IoT Development Kit V1.1 User Manual

Model: K010-V11

1. Produk Lebihview

The M5Stack Core2 V1.1 is an iterative version of the second-generation host in the M5Stack development kit series, designed to further enhance functionality based on the original generation host. It is a versatile ESP32-based IoT development kit suitable for a wide range of applications.

M5Stack Core2 V1.1 device with text 'Core2 v1.1 is the iterative version of the second-generation host in the M5Stack development kit series, further enhancing the functionality based on the original generation host'
Figure 1: M5Stack Core2 V1.1 - Enhanced Functionality

2. Kandungan Pakej

Pastikan semua item ada dalam pakej:

  • Core2 V1.1 x 1
  • USB Type-C cable (20cm) x 1
  • Sepana hex x 1
Contents of the M5Stack Core2 V1.1 package, including the device, USB-C cable, and hex wrench.
Figure 2: What's in the Package

3. Reka Letak Peranti dan Komponen

Familiarize yourself with the physical features and components of your M5Stack Core2 V1.1:

Detailed diagram of M5Stack Core2 V1.1 with labels for 2 inch LCD, touch screen, PWR button, USB-C port, PORT.A.I2C, Micro SD Card slot, LED, RST button, and internal components like ESP32, CH9102, MPU6886, RTC, Speaker, Battery, Microphone, Capacitive Touch, and Vibration Motor.
Figure 3: M5Stack Core2 V1.1 Component Overview
  • paparan: 2-inch LCD with 320x240 resolution and touch screen functionality.
  • Butang Kuasa (PWR): Press and hold for 6 seconds to turn off. Controls AXP_PWR.
  • Port USB-C: For power and data communication.
  • PORT.A.I2C: I2C interface for external modules.
  • Slot Kad Mikro SD: Untuk storan yang boleh dikembangkan.
  • LED: Lampu penunjuk kuasa.
  • Butang Tetapkan Semula (RST): Tetapan semula sistem.
  • Komponen Dalaman: ESP32-D0WDQ6-V3, CH9102, MPU6886, RTC@BM8563, 1W Speaker@NS4168(I2S), 3.7V/500mAh Battery, Microphone@SPM1423, Capacitive Touch, Vibration Motor.
  • Upgrade Interfaces: INA3221, AXP2101, 3-CH mA-METER.
M5Stack Core2 V1.1 with its internal board and pinout diagram visible, showing ESP32, GPIO pins, and other connections.
Figure 4: Internal Components and Pinout

4. Persediaan dan Operasi Awal

4.1 Menghidupkan

To power on your M5Stack Core2 V1.1, ensure the battery is charged or connect it via the USB-C cable to a power source. The device will typically display a boot sequence and then load its default interface.

4.2 Interaksi Asas

The Core2 V1.1 features a 2-inch touch screen and three virtual screen buttons for interaction. The video below demonstrates initial power-on, self-tests, and basic UI navigation:

Video 1: M5Stack Core2 V1.1 Unboxing and Basic Functionality Demonstration (including LED test, IMU check, WiFi scan, timer, and system tests).

The device can perform various functions, including:

  • WiFi scanning and network analysis.
  • Timer functions.
  • System diagnostics for I/O, motor, TFT, and sound.
  • IMU (Inertial Measurement Unit) testing, as shown with the 3D cube rotation.
M5Stack Core2 V1.1 screen displaying various icons and text, highlighting M-Bus interface, TF card slot, 16M Flash, 8M PSRAM, power indicator light.
Figure 5: Core2 V1.1 Display Interface

5. Aplikasi

The M5Stack Core2 V1.1 is designed for diverse applications, including:

  • DIY projects and prototyping.
  • STEM education for learning about electronics and programming.
  • IoT controllers for smart devices and automation.
  • Smart home devices.
Four images showing applications of M5Stack Core2 V1.1: DIY projects, STEM education, IoT controller, and Smart home devices.
Figure 6: Scope of Application

6. Spesifikasi

Key technical specifications for the M5Stack Core2 V1.1:

Spesifikasi Parameter
SoCESP32-D0WDQ6-V3, 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi
kilat16MB
PSRAM8MB
Input Voltage5V @ 500mA
Antara Muka HosType-C x 1, GROVE (I2C+I/O+UART) x 1
LEDBlue power indicator light
ButangPower button, RST button, 3 virtual screen buttons
Alert GetaranMotor getaran
Nombor ModelK010-V11
asal usulTanah Besar China
Bateri TermasukYes (3.7V/500mAh)
Medan Aplikasi BiasaInternet Perkara (IoT)
Table of specifications for M5Stack Core2 V1.1, listing SoC, Flash, PSRAM, Input Voltage, Host Interface, LED, Buttons, and Vibration Alert.
Rajah 7: Spesifikasi Terperinci

7. Penyelenggaraan

To ensure the longevity and optimal performance of your M5Stack Core2 V1.1, follow these maintenance guidelines:

  • Pembersihan: Gunakan kain lembut dan kering untuk membersihkan peranti. Elakkan pembersih atau pelarut yang kasar.
  • Storan: Simpan peranti di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
  • Penjagaan Bateri: The device includes a 3.7V/500mAh battery. For best battery life, avoid fully discharging the battery frequently and store it with a partial charge if not used for extended periods.
  • Perlindungan Fizikal: Handle the device with care to prevent drops or impacts that could damage the screen or internal components.

8. Penyelesaian masalah

If you encounter issues with your M5Stack Core2 V1.1, consider the following common troubleshooting steps:

  • Peranti Tidak Dihidupkan: Ensure the device is charged. Connect it to a power source using the USB-C cable. If the battery is completely drained, it might take a few minutes to show signs of life.
  • Skrin Tidak Responsif: If the touch screen is not responding, try restarting the device using the RST button. Ensure the screen is clean and free from debris.
  • Connectivity Issues (Wi-Fi/I2C): Double-check your code and hardware connections. Refer to the official documentation for correct wiring and programming examples.
  • Software/Firmware Problems: If the device behaves unexpectedly, consider reflashing the firmware. Detailed instructions are available in the official M5Stack documentation.

9. Petua Pengguna

Here are some helpful tips from other users and general best practices for your M5Stack Core2 V1.1:

  • Accessing Tutorials: For programming and advanced usage, always refer to the official M5Stack documentation. You can find tutorials and resources on their webtapak.
  • Programming Resources: The M5Stack Core2 V1.1 can be programmed using various platforms. Check the official M5Stack website for recommended development environments and programming guides.
  • Sokongan Komuniti: Engage with the M5Stack community forums or online groups for additional support, project ideas, and troubleshooting advice.
Flowchart showing steps to access tutorials on the M5Stack website: 1. Go to m5stack.com, 2. Click on 'DOCUMENT', 3. <span>Search for</span> products, 4. Scroll down and find 'Tutorial'.
Figure 8: How to Access Tutorials

10. Waranti dan Sokongan

For warranty information, technical support, and further assistance, please visit the official M5Stack webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan resit pembelian anda sebagai bukti pembelian.

Dokumen Berkaitan - K010-V11

Praview M5Stack CORE2: ESP32 Development Board Overview dan Panduan Mula Pantas
Comprehensive guide to the M5Stack CORE2, an ESP32-based development board featuring a 2-inch TFT screen, detailing its hardware, functions, power management, and UIFlow quick start.
Praview M5Stack Cardputer V1.1: Panduan Komputer Mudah Alih dan Platform Pembangunan
Panduan komprehensif untuk M5Stack Cardputer v1.1, sebuah komputer mudah alih berprestasi tinggi untuk jurutera dan pembangun. Ciri-ciri StampPengawal S3A, papan kekunci 56 kekunci, skrin TFT 1.14 inci, mikrofon MEMS dan sambungan yang meluas. Termasuk arahan persediaan, Soalan Lazim, spesifikasi dan butiran platform pembangunan.
Praview M5STACK STAMPLembaran Data S3 dan Spesifikasi Teknikal
Terokai M5STACK STAMPPapan pembangunan S3, menampilkan cip ESP32-S3 dengan Wi-Fi dan Bluetooth 5 (LE). Lembaran data ini memperincikan komposisi perkakasannya, perihalan pin, keupayaan berfungsi dan ciri elektrik untuk projek IoT.
Praview M5STACK Stamp-Manual Pengguna dan Panduan Permulaan Pantas S3Bat
Manual pengguna yang komprehensif dan panduan permulaan pantas untuk M5STACK Stamp-S3Bat, an ESP32-S3-based embedded core module. It details the module's features, specifications, setup procedures for Arduino IDE, Wi-Fi scanning, BLE scanning, and includes FCC compliance information. This guide helps developers quickly build IoT applications.
Praview Papan Pembangunan M5Stack AtomS3-Lite ESP32-S3
Terokai M5Stack AtomS3-Lite, papan pembangunan ESP32-S3 padat yang menampilkan Wi-Fi, antena bersepadu dan antara muka serba boleh untuk projek IoT dan mikropengawal. Ketahui tentang spesifikasi, ciri dan pilihan pembangunannya dengan Arduino IDE dan UiFlow2.
Praview M5STACK AtomS3 Lite User Manual: ESP32-S3 Development Board Guide
Comprehensive user manual for the M5STACK AtomS3 Lite development board featuring the ESP32-S3. Covers hardware, features, pin descriptions, electrical specifications, and quick start guides for Arduino, Bluetooth, and Wi-Fi.