pengenalan
This manual provides comprehensive instructions for the VAF7640 replacement remote control, designed to operate various Yamaha Home Theater Audio Sound Bar models, including ATS-1080 and YAS-108. Please read this manual carefully before using the remote control to ensure proper operation and to maximize your audio experience.
Maklumat Keselamatan
- Jauhkan bateri daripada kanak-kanak.
- Jangan campurkan bateri lama dan baharu, atau jenis bateri yang berlainan.
- Tanggalkan bateri jika alat kawalan jauh tidak akan digunakan untuk tempoh yang lama untuk mengelakkan kebocoran.
- Buang bateri terpakai mengikut peraturan tempatan.
- Elakkan alat kawalan jauh daripada terdedah kepada cahaya matahari langsung, sumber haba atau kelembapan.
Kandungan Pakej
- 1 x VAF7640 Replacement Remote Control
Note: Battery (1 x CR 2025) is not included and must be purchased separately.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | VAF7640 |
| Jenama yang Serasi | Untuk Yamaha |
| guna | Audio / Video Players (Sound Bars) |
| Komunikasi Tanpa Wayar | Inframerah (IR) |
| Kekerapan | 433 MHz |
| Saluran | 1 |
| bahan | Bahan ABS |
| Julat Tanpa Wayar | Sehingga 5 meter (garis penglihatan) |
| Bateri Diperlukan | 1 x CR 2025 (Coin Cell) |
| Sokong APP | Tidak |
| Pensijilan | CE |
Persediaan
Pemasangan Bateri
- Cari petak bateri di belakang alat kawalan jauh.
- Slide the battery tray out. The tray is typically located at the bottom of the remote, as shown in the diagram.
- Insert one (1) CR 2025 coin cell battery into the tray, ensuring the positive (+) side faces upwards, as indicated inside the compartment.
- Slide the battery tray back into the remote control until it clicks securely into place.
The remote control is now ready for use. No programming is typically required for this replacement IR remote; it should function directly with compatible Yamaha sound bar models.
Arahan Operasi
Point the remote control directly at your Yamaha sound bar's IR receiver. Ensure there are no obstructions between the remote and the sound bar.
Fungsi Butang
- Kuasa (Butang Oren): Turns the sound bar on or off.
- HDMI, TV, ANALOG, BLUETOOTH: Selects the corresponding input source for your sound bar.
- SURROUND, STEREO, 3D SURROUND: Activates different audio sound modes.
- INFO: Displays information about the current settings or input.
- SUARA JELAS: Enhances dialogue clarity.
- BLUETOOTH STANDBY: Puts the sound bar into Bluetooth standby mode.
- DIMMER: Adjusts the brightness of the sound bar's display.
- SAMBUNGAN BASS: Enhances low-frequency sound output.
- HILANGKAN: Membisukan atau menyahbisukan bunyi.
- JILID (+/-): Increases or decreases the main volume.
- SUBWOOFER (+/-): Increases or decreases the subwoofer volume level.
Penyelenggaraan
- Pembersihan: Lap alat kawalan jauh dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut yang melelas.
- Penggantian Bateri: Replace the CR 2025 battery when the remote's range decreases or it stops responding. Follow the battery installation steps in the Setup section.
- Penyimpanan: Simpan alat kawalan jauh di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Jauh tidak berfungsi | Bateri mati atau salah dimasukkan | Replace the CR 2025 battery, ensuring correct polarity. |
| Remote has short range or intermittent response | Weak battery; Obstruction between remote and sound bar; Remote not pointed correctly | Replace battery; Remove obstructions; Ensure direct line of sight to sound bar's IR receiver. |
| Specific button not working | Button malfunction; Sound bar not compatible with that specific function | Test other buttons. If only one button fails, the remote may be faulty. Verify your sound bar model supports the function. |
| Sound bar not responding at all | Sound bar is off or unplugged; Sound bar's IR receiver is blocked or faulty | Ensure sound bar is powered on and plugged in. Check sound bar's manual for troubleshooting its IR receiver. |
Petua pengguna
Tiada petua pengguna khusus tersedia daripada reviews or Q&A for this product. However, general advice for IR remotes includes:
- Always ensure a clear line of sight between the remote's IR emitter and the sound bar's IR receiver.
- Avoid using the remote in brightly lit environments, especially direct sunlight, as strong light can interfere with IR signals.
- Keep the remote clean to prevent dust or grime from obstructing the IR emitter or buttons.
Waranti dan Sokongan
For any issues not covered in this manual, or for warranty inquiries, please contact the seller directly through your purchase platform. Keep your purchase receipt or order number handy for faster service.
