Maklumat Keselamatan Penting
⚠ BAHAYA
- Keep this product away from flammable materials and open flames. The battery and electronic components are a potential fire hazard if damaged or misused.
⚠ AWAS
- Avoid looking directly into the infrared/laser aiming beam, as it may cause eye irritation or damage.
- Baca arahan ini dengan teliti sebelum digunakan dan simpan untuk rujukan masa hadapan.
- Do not expose the transmitter or receiver to high temperatures, direct sunlight, or humid environments; this product is intended to be used in dry areas only.
- The RC model's hull and motor may become hot during prolonged use. Do not touch hot surfaces to avoid burns.
- Do not operate the RC model near water, swimming pools, or other liquid environments.
WARNING: CHOKING HAZARD - Small parts. Not for Children under 3 years.
(Also applies to AVVERTENZA, AVERTISSEMENT, WARNUNG, OSTRZEZENIE in other languages)
Apa yang ada dalam Kotak
- 1 x Flysky PL18EV Lite Transmitter
- 1 x Flysky FGr12B Receiver
Persediaan
1. Charging Transmitter Battery
- The PL18EV Lite Transmitter has a 1S (3.7V) 4300mAh built-in battery. Fully charge it according to the included charging instructions.
- Charging is via Micro USB.
- Charging Time: Approximately 4 hours via 5V*2A Micro USB, or 7 hours via 5V*2A wireless charging (if supported).
2. Installing RC Model Batteries
- Fully charge your RC model's main battery.
- Install the charged battery into your RC model's battery compartment and secure the cover.
3. Initial Transmitter State
- Ensure the power switch on the PL18EV Lite Transmitter is in the "OFF" position before connecting or powering on any components.
4. Pengikatan Penerima
- The FGr12B Receiver is designed to work with transmitters supporting the AFHDS3 protocol (e.g., PL18, NB4, NB4 Lite). Refer to the specific binding instructions provided with your full product manual or the Flysky website for detailed steps on how to bind the receiver to the transmitter. This process typically involves putting both the receiver and transmitter into a binding mode.
Operasi
Urutan Hidupkan/Mati
- To power on: First, turn on the PL18EV Lite Transmitter. Then, power on your RC model.
- To power off: First, power off your RC model. Then, power off the PL18EV Lite Transmitter.
Kawalan Asas
The PL18EV Lite is an 18-channel transmitter. Its joysticks, switches, and dials control various functions of your RC model. Familiarize yourself with the layout and assign functions as per your model's requirements. The 3.5-inch TFT display provides real-time information and allows for configuration of channels, mixing, and other advanced settings.
Penyelenggaraan
Pembersihan
- Use a dry, soft cloth to wipe the exterior of the transmitter and receiver.
- Do not use water, solvents, or abrasive cleaners, as these can damage the electronic components and finish.
Pemeriksaan
- Regularly inspect the joysticks, switches, and antenna on the transmitter for any signs of wear or damage.
- Inspect the receiver's antenna and connections for integrity.
- If your RC model has tracks or complex moving parts, inspect them regularly for debris and remove any dirt or obstructions to ensure smooth movement.
Penyimpanan
- After use, ensure both the RC model and the remote control are powered off.
- Store the transmitter and receiver in a cool, dry place, away from direct sunlight, high temperatures, and humid environments.
- Jauhkan produk daripada kanak-kanak dan haiwan peliharaan.
Menyelesaikan masalah
Tiada Kuasa / Peranti Tidak Dihidupkan
- Ensure the built-in battery of the PL18EV Lite Transmitter is fully charged. Connect it to a Micro USB power source and check the charging indicator.
- Verify that the power switch is correctly in the "ON" position.
Loss of Signal / Unresponsive Model
- Check the battery levels of both the transmitter and the RC model.
- Ensure the transmitter and receiver are properly bound. If not, refer to the binding instructions.
- Verify that you are within the specified remote control distance (>500m ground distance).
- Check for potential interference from other 2.4GHz devices or large metal objects in the operating area.
- Inspect the antennas on both the transmitter and receiver for damage.
Isu Paparan
- If the HVGA 3.5 Inch TFT display is not functioning correctly, try restarting the transmitter.
- Ensure the device is not exposed to extreme temperatures.
Spesifikasi
Flysky PL18EV Lite Transmitter
| Ciri | Spesifikasi |
|---|---|
| Bilangan Saluran | 18 |
| Kekerapan Wayarles | 2.4G |
| Menghantar Kuasa | <20dBm |
| Protokol Tanpa Wayar | AFHDS3 |
| Jarak Kawalan Jauh | >500m (ground distance) |
| Resolusi Saluran | 4096 |
| Bateri | 1S (3.7V) 4300mAh (terbina dalam) |
| Antara Muka Pengecasan | USB mikro |
| Masa Mengecas | 4h@5V*2A (USB) / 7h@5V*2A (wireless charging) |
| Vol. Rendahtage Penggera | <3.65V |
| Jenis Antena | Antena berganda |
| Paparan | HVGA 3.5 Inch TFT, 320*480 |
| Emulator | USB Emulator |
| Antaramuka Data | USB, Headphone Port (PPM), Bluetooth Interface (USART) |
| Julat Suhu | -10 ℃ hingga + 60 ℃ |
| Kemas kini dalam talian | Sokongan |
| Saiz | 214*120*196mm |
| Berat badan | Kira-kira 1006g |
| Pensijilan | CE, FCC ID:N4ZFGR12B |
Flysky FGr12B Receiver
| Ciri | Spesifikasi |
|---|---|
| Model Produk | FGr12B |
| Pemancar Adaptif | All transmitters supporting AFHDS3 (PL18, NB4, NB4 Lite, etc.) |
| Jenis Model | Car/Boat etc. |
| Saluran PWM | 11 (Version 2.0 will be upgraded to 12 channels) |
| RF | 2.4GHZ |
| Protokol 2.4G | AFHDS3 |
| Antena | Antena Tunggal |
| Kuasa Input | 3.5-9V |
| Output Data | PWM\PPM\i-bus in |
| Julat Suhu | -10 ℃ hingga + 60 ℃ |
| Had Kelembapan | 20%-95% |
| Kemas kini dalam talian | ya |
| Dimensi | 37 x 25 x 17.5mm |
| Berat badan | 11.2g |
Petua pengguna
- Tetapan Bahasa: The PL18EV Lite transmitter features a 3.5-inch TFT display. If you need to change the display language, navigate through the system settings menu on the transmitter. Consult the full user manual for detailed instructions on accessing and modifying language preferences.
Waranti dan Sokongan
Manual Pengguna (PDF)
A comprehensive user manual in PDF format is available for detailed instructions and advanced features. You can view atau muat turunnya dari pautan berikut:
Flysky PL18EV Lite User Manual (PDF)
Maklumat Waranti
For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.
Sokongan Teknikal
For technical assistance, firmware updates, or further inquiries, please visit the official Flysky webtapak atau hubungi saluran sokongan pelanggan mereka.
