Jebao MDP Series

Jebao MDP Series WiFi Smart DC Water Return Pump

Manual Arahan

1. Pengenalan

The Jebao MDP Series WiFi Smart DC Water Return Pump is designed for efficient and reliable water circulation in both freshwater and marine aquarium tanks. Featuring advanced SINE wave technology for ultra-quiet operation and a smart LCD display controller with WiFi connectivity, this pump offers precise control and robust protection features to ensure optimal performance and longevity.

Jebao MDP Series Smart DC Water Return Pump with LCD Display Controller.
Figure 1: Jebao MDP Series Smart DC Water Return Pump and Controller.

2. Ciri-ciri Utama

  • WiFi + Manual Control Function: Offers flexible control options via a smart controller or a mobile application.
  • Smart AP Mode Control Function: Allows direct connection to the pump's controller without requiring a separate router.
  • SINE Wave Technology: Ensures ultra-quiet operation and high, stable performance.
  • IC Electronic Detection: Provides dry-run and locked rotor protection, with automatic power-off upon no water detection.
  • Perlindungan Motor: Safeguards the motor if the rotor becomes blocked.
  • No Copper Element: Suitable for both marine and freshwater environments, preventing copper contamination.
  • Aci Seramik Tahan Haus: Contributes to a longer operational life for the pump.
  • Vol. Rendahtage DC Power Supply: Meningkatkan keselamatan dan kecekapan tenaga.
Diagram illustrating key technologies: SINE Wave, WiFi Operation, Wear-Resistant Ceramic Shaft, Low Voltage DC Power Supply.
Figure 2: Visual representation of key features.

3. Apa yang Termasuk

Upon unpacking, please verify that all the following components are present:

  • 1 x MDP Smart DC Pump
  • 1 x WiFi Controller with LCD display
  • 1 x Power Supply (AC Adapter)
  • Various Inlet/Outlet Fittings and O-rings
  • Manual Pengguna (dokumen ini)
Contents of the Jebao MDP-2500 Smart DC Pump package, including pump, controller, power supply, and accessories.
Figure 3: Package contents for MDP-2500 model (contents may vary slightly by model).

4. Arahan Persediaan

  1. Buka Pembungkusan Komponen: Carefully remove all items from the packaging and check against the "What's Included" list.
  2. Sambungkan Kelengkapan: Attach the appropriate inlet and outlet fittings to the pump. Ensure O-rings are properly seated for a watertight seal.
  3. Letakkan Pam: Place the pump in your desired location within the aquarium or sump. Ensure it is fully submerged if intended for submersible use, or properly plumbed for external use according to your system's design.
  4. Connect Pump to Controller: Connect the pump's cable securely to the designated port on the WiFi LCD display controller.
  5. Sambungkan Bekalan Kuasa: Plug the power supply (AC adapter) into the controller, then plug the AC adapter into a suitable power outlet.
  6. Kuasa Awal Hidup: The pump will perform a self-test and the LCD display will illuminate.

Note: Always ensure the pump is properly installed and submerged (if applicable) before connecting to power to prevent dry-run damage.

5. Arahan Operasi

5.1 Kawalan Manual

The LCD display controller allows for direct adjustment of the pump's flow rate. Use the up/down arrows on the controller to increase or decrease the pump's power output and flow. The display will show the current power level (e.g., P23w) and a bar graph indicating intensity.

5.2 WiFi Control (App)

For advanced control and scheduling, download the Jebao Aqua app from the App Store (iOS) or Google Play Store (Android). Follow the in-app instructions to connect your pump to your smartphone via WiFi.

  1. Download and install the "Jebao Aqua" app.
  2. Buka aplikasi dan buat akaun atau log masuk.
  3. Select "Add Device" and follow the prompts to connect your MDP pump. The controller supports Smart AP mode, allowing direct connection without a router for initial setup.
  4. Once connected, you can adjust flow rates, set schedules, and monitor pump status remotely.
Empat berbeza views of the Jebao MDP pump and its smart controller.
Figure 4: Various angles of the pump and controller, highlighting the LCD display.

6. Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your Jebao MDP pump.

  1. Putuskan Kuasa: Sentiasa cabut plag pam dari salur keluar kuasa sebelum melakukan sebarang penyelenggaraan.
  2. Pendesak Bersih: Periodically remove the pump's front cover and impeller assembly. Clean any debris, algae, or calcium buildup from the impeller and its chamber using a soft brush and warm water. For stubborn buildup, a mild vinegar solution can be used, followed by thorough rinsing.
  3. Periksa Aci Seramik: Check the wear-resistant ceramic shaft for any signs of damage or excessive wear. Replace if necessary.
  4. Clean Inlet/Outlet: Ensure the inlet and outlet ports are free from obstructions.
  5. Pasang semula: Carefully reassemble the pump, ensuring all parts are correctly aligned and seals are intact.

Frequency of cleaning depends on water quality and usage, but a monthly check is recommended.

7. Penyelesaian masalah

MasalahKemungkinan PuncaPenyelesaian
Pam tidak berjalanNo power; Dry-run protection activated; Locked rotor protection activated.Check power connection. Ensure pump is submerged (if applicable). Check for obstructions around the impeller. Reset power.
Kadar aliran dikurangkanClogged impeller or intake; Air in the system; Incorrect flow setting.Clean impeller and intake. Bleed air from plumbing. Adjust flow rate via controller or app.
Bunyi/getaran luar biasaDebris in impeller; Worn impeller or shaft; Improper installation.Clean impeller. Inspect impeller and ceramic shaft for damage and replace if necessary. Ensure pump is securely installed and not vibrating against surfaces.
Controller not responding/WiFi issuesController malfunction; WiFi signal interference; Incorrect app settings.Restart controller. Check WiFi signal strength. Re-pair with app. Ensure app is updated.

The pump features IC electronic detection for dry/locked rotor protection, automatically shutting off power if no water is detected or the motor is blocked. If these protections activate, address the underlying issue before restarting the pump.

8. Spesifikasi

ModelVoltagekuasaQ max (L/H)H maks (m)In / Out (Φ mm)
MDP-2500DC 24V23W25002.520/25
MDP-3500DC 24V28W35003.520/25/30
MDP-5000DC 24V40W50004.020/25/32/40
MDP-6500DC 24V48W65004.520/25/32/40
MDP-8500DC 24V65W85005.220/25/32/40
MDP-10000DC 24V80W100006.020/25/32/40
MDP-13000DC 24V95W135006.525/32/38/40/50
MDP-15000DC 24V105W150007.025/32/38/40/50
MDP-20000DC 36V165W200009.538/40/50

Spesifikasi Umum:

  • Bahan: Stainless steel (for certain components, typically shaft)
  • Borang Tetap: duduk
  • Sumber Kuasa: Charge (DC Power Supply)
  • Input Voltage: 110-240V (AC adapter input)
Table of technical specifications for various Jebao MDP pump models.
Figure 5: Detailed specifications for MDP Series pumps.

9. Petua Pengguna

  • Fungsi Pemasa: The WiFi controller, through the Jebao Aqua app, typically supports advanced scheduling features, including daily and weekly timers for precise control over pump operation cycles. Refer to the app's interface for detailed timer setup.
  • Keserasian Bekalan Kuasa: Ensure you select the correct power plug type (EU, US, AU, UK) when purchasing to match your region's electrical standards.
  • Operasi senyap: To maximize the benefit of the SINE wave technology, ensure the pump is installed on a stable, vibration-dampening surface.

10. Waranti dan Sokongan

For warranty information, technical support, or service inquiries, please contact the seller or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Dokumen Berkaitan - Siri MDP

Praview Manual Pengguna Pam DC Pintar Jebao - Siri MDP
Manual pengguna yang komprehensif untuk Jebao Smart DC Pumps (Siri MDP), meliputi ciri, operasi, kawalan aplikasi, persediaan Wi-Fi, penyelenggaraan dan penyelesaian masalah.
Praview Manual Pengguna Pam Jebao DC - Siri DCP
Manual pengguna yang komprehensif untuk Jebao DC Pumps (DCP-2500 hingga DCP-20000), meliputi ciri, operasi, penyelenggaraan dan penyelesaian masalah.
Praview Manual Pemilik Pam Jebao DC - Model DCP-2500 hingga DCP-20000
The Jebao DC Pump Owner's Manual provides comprehensive instructions for the safe operation, installation, maintenance, and troubleshooting of DCP-2500, DCP-3000, DCP-4000, DCP-5000, DCP-6500, DCP-8000, DCP-10000, DCP-15000, DCP-18000, and DCP-20000 models. Learn about features like adjustable flow rate, feed mode, memory function, and automatic power-off protection for both submersible and non-submersible applications in marine and fresh water environments.
Praview Jebao MDC Series Aquarium Pumps User Manual
User manual for Jebao MDC series aquarium pumps, detailing features, safety instructions, installation, operation, and technical specifications. Includes models MDC-2000 to MDC-10000.
Praview Manual Pengguna Jebao Smart Wave Maker - Persediaan, Operasi dan Penyelesaian Masalah
Manual pengguna yang komprehensif untuk Jebao Smart Wave Maker (MCP, MLW, MOW SERIES), meliputi pemasangan, ciri, kawalan aplikasi melalui Jebao Aqua, pelbagai mod gelombang, penyelesaian masalah dan penyelenggaraan. Ketahui cara menyediakan dan mengendalikan pembuat gelombang Jebao anda untuk keadaan akuarium yang optimum.
Praview Manual Pemilik Pam Jebao DC - Siri DCW
Manual pemilik yang komprehensif untuk Jebao DC Pumps, meliputi model DCW-2000 hingga DCW-10000. Butiran ciri, arahan pengendalian, fungsi pengawal, penyelenggaraan, penyelesaian masalah dan garis panduan pelupusan.