1. Pengenalan
This manual provides instructions for the safe and efficient use of the N324 Dual Battery Charger. This charger is designed to charge batteries for various Trimble Total Stations, including the M3, DR2, DR3, DR5, Nivo 2M, and Nivo 2C models. Please read this manual thoroughly before operating the device.
2. Persediaan
- Buka Pembungkusan Pengecas: Carefully remove the N324 dual battery charger and its AC/DC adapter from the packaging.
- Periksa Kerosakan: Check the charger and adapter for any visible signs of damage. Do not use if damaged.
- Connect the AC/DC Adapter: Plug the DC output connector of the AC/DC adapter into the input port on the N324 charger.
- Sambung ke Kuasa: Plug the AC input of the adapter into a standard wall outlet (100-240V ~ 50/60Hz).
3. Arahan Operasi
The N324 charger features two charging bays, allowing for simultaneous charging of two compatible batteries.
- Masukkan Bateri: Align the battery with the charging bay and gently slide it into place until it clicks securely. Ensure proper orientation.
- Status Pengecasan Pantau: The charger will typically have indicator lights (not explicitly detailed in provided info, but common for chargers) to show charging status (e.g., red for charging, green for fully charged).
- Keluarkan Bateri: Once charging is complete, carefully remove the batteries from the charging bays.
4. Penyelenggaraan
- Pembersihan: Use a soft, dry cloth to clean the charger. Do not use liquid cleaners or solvents.
- Storan: Simpan pengecas di tempat yang sejuk dan kering apabila tidak digunakan.
- Elakkan Menarik: Do not pull on the power cord to disconnect the charger. Always grasp the plug firmly.
5. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pengecas tidak dihidupkan | No power from outlet; adapter not connected properly; faulty adapter/charger | Check wall outlet with another device; ensure adapter is securely connected; contact support if issue persists. |
| Bateri tidak dicas | Battery not inserted correctly; incompatible battery; faulty battery | Re-insert battery, ensuring proper contact; verify battery compatibility; try another battery if available. |
6. Spesifikasi
N324 Dual Battery Charger
- model: N324
- Input: DC 9V, 4.0A
- Output: DC 4.2V, 2A per port
- Keserasian: Trimble M3, DR2, DR3, DR5, Nivo 2M, Nivo 2C Total Stations (specifically batteries P/N: 67201-01-SPN / 8900084XXQ)
- Asal: Buatan China
- Nombor Bahagian: 67201-01-SPN
- Nombor Siri: EGL-22039
Penyesuai AC/DC
- model: 24-0503000-H
- Input: 100-240V ~ 50/60Hz 1.0A
- Output: 5.0V === 3.0A
- Asal: Buatan China
Safety Information (from product label)
PERHATIAN: Risk of fire, explosion or burns. Do not disassemble. Do not crush or modify. Do not heat above 60°C (140°F). Do not short circuit. Do not dispose of in fire or water. Use only rechargeable Lithium-ion batteries. Refer to the battery manufacturer's instructions for proper use.
7. Petua Pengguna
- Always ensure the charger is placed on a stable, flat surface during operation to prevent accidental disconnections or damage.
- For optimal battery life, avoid completely draining batteries before recharging them.
- If charging only one battery, either bay can be used.
8. Waranti dan Sokongan
For any questions, technical support, or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.