pengenalan
This manual provides comprehensive instructions for the Scimagic-RC 868MHz universal remote control. Designed for compatibility with various garage door and gate openers, this remote offers a convenient solution for duplicating existing 868MHz fixed code remotes. Please read this manual carefully before use to ensure proper setup and operation.
Spesifikasi
| Atribut | Nilai |
|---|---|
| Bahan Produk | ABS, Metal, PVC |
| Berat Produk | 40 g |
| Warna Produk | Hitam + Perak |
| Dinilai Voltage | 3V (CR2032 battery included) |
| Pemasangan | Tanpa wayar |
| Jarak Penghantaran Tanpa Wayar | 10-150 meter (ruang lapang) |
| Kekerapan | 868MHz, 868.3MHz, 868.35MHz |
| Kaedah Pengekodan | Kod tetap |
| Cloning Time | Approximately 10-15 seconds |
| Ciri-ciri | Slide design button protection, Advanced chip, Newest Clone technology |
| Saiz | 58 x 32 x 12 mm |
Keserasian
This remote control is compatible with the following 868MHz fixed code remote models:
- Hormann: hsm2 868, hsm4 868, hs1 868, hs2 868, hs4 868, hse2 868, hse4 868, hsz1 868, hsz2 868, hsp4 868, hsp4-c 868, hsd2-A 868, hsd2-c 868
- Marantec Digital: D382 868, D384 868, D302 868, D304 868, D313 868, D321 868, D323 868, Command 131 868
- BERNER: BHS110, BHS121, BHS130, BHS140, BHS153, BHS211, BHS221
Nota Penting:
- Only applicable to HORMANN remotes with blue buttons.
- Not compatible with HORMANN BS series (BiSecur version).
Setup and Programming (Cloning)
The remote control can be cloned in approximately 10-15 seconds and used directly after cloning. Follow these steps for face-to-face copying:
Step 1: Clear the History Code from the Duplicator
- Press and hold button A (Lock button) and button B (Unlock button) continuously until the LED flashes 3 times.
- Release button B (keep pressing button A).
- While still pressing button A, press button B slowly for 3 times. The LED will flash.
- Release button A. The code clearance is now complete.
Step 2: Copy Code from the Original Transmitter
- Place the duplicator remote control next to the original transmitter, as close as possible.
- Press and hold button A of the original transmitter.
- Then, press and hold button A of the duplicator remote control until you see the duplicator's LED flash.
- Release both buttons. The code for button A is now copied.
- Repeat the same process for other buttons (B, C, D) if your remote has them.
Operasi
After successful cloning, your new Scimagic-RC remote control will function identically to your original remote. Simply press the corresponding button to activate your garage door, gate, or other compatible device.
Penyelenggaraan
Penggantian Bateri
The remote control is powered by a CR2032 3V battery. When the remote's range decreases significantly or the LED indicator becomes dim, it's time to replace the battery. To replace:
- Buka alat kawalan jauh dengan berhati-hati casing.
- Keluarkan bateri CR2032 lama.
- Masukkan bateri CR2032 baharu, pastikan kekutuban yang betul (+/-).
- Tutup alat kawalan jauh casing dengan selamat.
Penjagaan dan Penyimpanan
- Keep the remote control dry and away from extreme temperatures.
- Elakkan daripada menjatuhkan alat kawalan jauh atau terkena impak yang kuat.
- Clean the remote with a soft, dry cloth. Do not use harsh chemicals.
Menyelesaikan masalah
- Remote not cloning: Ensure your original remote is a fixed code 868MHz model and not a rolling code (e.g., Hormann BS series). Make sure the duplicator's history code is cleared before attempting to copy. Hold the remotes as close as possible during cloning.
- Cloned remote not working: Verify that the cloning process was successful (LED flashes as described in setup). Check the battery in the new remote. Ensure your original remote is fully functional.
- Julat dikurangkan: Replace the CR2032 battery in the remote control. Ensure there are no obstructions between the remote and the receiver.
- Hormann compatibility: This remote is only compatible with Hormann remotes that have blue buttons. It will NOT work with Hormann BiSecur (BS) series remotes.
Petua pengguna
- For best cloning results, perform the process in a quiet environment away from other radio frequency interference.
- If you have trouble cloning, try clearing the duplicator's code multiple times before attempting to copy again.
- Always test the cloned remote's functionality from a safe distance before relying on it for daily use.
Waranti dan Sokongan
This product comes with a 1-year warranty from the date of purchase. In case of any quality problems, returns are accepted within 7 days. For support or warranty claims, please contact the seller directly.
