1. Pengenalan
Thank you for choosing the Ambition Wireless Tattoo Battery Grip Power. This portable power supply is designed for rotary cartridge tattoo machines, offering wireless operation with a 1600mAh battery capacity and an RCA interface. This manual provides essential information for safe and efficient use of your device. Please read it thoroughly before operation and retain it for future reference.
2. Maklumat Keselamatan
WARNING: Lithium Battery Safety
Please be aware of potential fire risks associated with internal lithium batteries. Do not disassemble, puncture, crush, expose to high temperatures, or dispose of in fire or water. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with applicable legal requirements.
AWAS
- It is prohibited to modify, disassemble, or repair products without authorization.
- Baca arahan ini dengan teliti dan simpan untuk rujukan pada masa akan datang.
- Protect the product from exposure to extreme temperatures, direct sunlight, or humid environments.
- Do not place the product near heat sources (e.g., radiators, stoves) as the surface may become hot.
- Produk ini bertujuan untuk digunakan di kawasan kering sahaja.
Keselamatan Alam Sekitar:
No ordinary discarding. This product is classified and recycled according to the EU WEEE directive. Batteries are recycled separately; do not throw them into fire/water.
3. Kandungan Pakej
Selepas membongkar, sila pastikan semua item berikut ada:
- 1x Ambition Wireless Battery Grip
- 3x Plunger (85-90-95mm)
- 1x Kabel USB (Jenis-C)
- 1x Silicone Circle
4. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nombor Model | ninja battery grip |
| taip | Bekalan Kuasa Tatu |
| Dimensi (L x D) | 86.5mm x 34mm |
| Grip Bar | 26mm x 8mm |
| Berat Bersih | 93g |
| Kapasiti Bateri | 1600mAh |
| Voltage Julat | 4V-12V |
| Voltage Pelarasan | ±0.1V / ±0.5V |
| Antara muka | RCA |
| Antara Muka Pengecasan | Jenis-C (5V) |
| Masa Pengecasan Penuh | 1.5-2 jam |
| Masa Bekerja | 5-7 jam |
| Bateri Termasuk | ya |
| Pensijilan | CE, GS |
5. Persediaan
- Charge the Battery Grip: Before first use, fully charge the battery grip using the provided Type-C USB cable. Connect the cable to the Type-C port on the grip and a compatible 5V USB power source.
- Attach RCA Cable: Connect the included RCA cable to the RCA interface on the top of the battery grip.
- Connect to Tattoo Machine: Attach the RCA cable from the battery grip to your rotary cartridge tattoo machine.
- Masukkan Kartrij: Insert a compatible tattoo cartridge into your machine.
- Laraskan Kedalaman Jarum: Adjust the needle depth on your tattoo machine as required. The battery grip is suitable for major brands of tattoo cartridges.
6. Operasi
The battery grip features an intuitive display and control buttons for easy voltage adjustment and power management.
Fungsi Butang:
- Button (O):
- Tekan lama: Hidupkan/matikan kuasa
- Short press: Start/pause
- Button (+): Tingkatkan voltage (0.1V or 0.5V increments)
- Button (-): Kurangkan voltage (0.1V or 0.5V increments)
mengecas:
The device charges via a Type-C interface. A full charge takes approximately 1.5-2 hours and provides 5-7 hours of working time.
Video Demonstrasi Produk:
7. Penyelenggaraan
- Avoid liquid contact with the sensor or electronic components.
- Jangan gunakan bahan kimia atau pembersih kasar.
- The product is not intended for use on hard surfaces; only soft surfaces.
- Periksa peranti dengan kerap untuk sebarang tanda kerosakan atau haus.
8. Penyelesaian masalah
- Peranti tidak dihidupkan: Ensure the battery is charged. Long press the 'O' button to power on.
- Machine not running: Check all connections (RCA cable to grip, RCA cable to machine). Ensure the machine is properly assembled and the cartridge is correctly inserted. Short press the 'O' button to start operation.
- Voltage not adjusting: Press the '+' or '-' buttons. If unresponsive, try powering the device off and on again.
- Short working time: The battery may not be fully charged, or it may be nearing the end of its lifespan. Ensure proper charging procedures are followed.
9. Petua Pengguna
- Keserasian: This battery grip is specifically designed for rotary cartridge tattoo machines. It is generally not compatible with traditional coil machines or traditional needles that require different power delivery mechanisms. Always verify your machine type before use.
- Voltage Pelarasan: Experiment with both 0.1V and 0.5V adjustment increments to find the precise voltage setting for your specific tattooing needs and machine.
- Hayat Bateri: To maximize battery life, avoid completely draining the battery frequently. Charge it when the battery indicator shows low power.
10. Pematuhan dan Pensijilan
The Ambition Wireless Tattoo Battery Grip Power complies with relevant international standards:
- CE: This symbol indicates compliance with European Union health, safety, and environmental protection standards (ENIEC 55014-1:2021, EN IEC 61000-3-2:2019+A1:2021+A2:2024, IEC 62321-3-1:2013, IEC 62321-7-1:2015 & IEC 62321-7-2:2017).
- UKCA: This symbol stands for "United Kingdom Conformity Assessed" and confirms compliance with UK market regulations.
Penjelasan Simbol:
- Arus terus (DC): Indicates the device operates on direct current.
- Palam USB: Indicates the device uses a USB connection for charging.
For further details, please refer to the Manual Pengguna (PDF).
11. Waranti dan Sokongan
Untuk maklumat jaminan atau sokongan teknikal, sila hubungi penjual atau pengilang secara langsung. Simpan resit pembelian anda sebagai bukti pembelian.
