1. Pengenalan dan Lebihview
This manual provides detailed instructions for the installation, operation, and maintenance of your Denso Auto Waterproof Wire Connectors. These connectors are designed for reliable electrical connections in automotive, truck, and other sealed applications, offering protection against water and dust ingress. They are available in various pin configurations from 1-pin to 16-pin to suit diverse wiring needs.
2. Spesifikasi
| Atribut | Nilai |
|---|---|
| Nombor Model | Siri Penyambung |
| Voltage Peringkat | 415 V |
| Pensijilan | CE |
| asal usul | Tanah Besar China |
| Berat Pakej | 0.01 kg |
| Dimensi Pakej (L x W x H) | 10 cm x 10 cm x 10 cm |
Dimensional Specifications by Pin Configuration
| Jenis Pin | Male (L/mm, W/mm, H/mm) | Female (L/mm, W/mm, H/mm) | ||||
|---|---|---|---|---|---|---|
| 1P (DJ7011Y-1.8) | 32.5 | 13.4 | 12.8 | 27.3 | 21.7 | 15.6 |
| 2P (DJ70216Y-1.8) | 32.7 | 18.3 | 14.1 | 27.7 | 20.5 | 22.8 |
| 3P (DJ70316Y-1.8) | 32.9 | 23.5 | 13.4 | 27.4 | 25.5 | 22.5 |
| 4P (DJ70416Y-1.8) | 35.4 | 18.3 | 20.4 | 27.3 | 20.4 | 29.6 |
| 6P (DJ70616Y-1.8) | 35.8 | 23 | 20.2 | 28 | 25 | 30.3 |
| 8P (DJ70816Y-1.8) | 36.4 | 28 | 26.6 | 27.3 | 30.6 | 33 |
| 10P (DJ71016Y-1.8) | 36 | 32.2 | 26 | 27.4 | 35.5 | 32.6 |
| 12P (DJ71216Y-1.8) | 35.8 | 37.4 | 22.6 | 27.4 | 40.5 | 32.8 |
| 16P (DJ71616Y-1.8) | 36 | 41 | 30 | 32 | 44 | 26 |
3. Kandungan Pakej
Each set of Denso Auto Waterproof Wire Connectors typically includes:
- Male Connector Housing
- Female Connector Housing
- Corresponding Male Terminals
- Corresponding Female Terminals
- Rubber Seals (for terminals and housing)
4. Persediaan dan Pemasangan
Proper installation is crucial for ensuring the waterproof integrity and electrical performance of these connectors. Follow these general steps:
- Sediakan Wayar: Strip approximately 3-5mm of insulation from the end of each wire. Ensure the wire gauge is appropriate for the terminals provided.
- Crimp Terminals: Slide a rubber seal onto each stripped wire. Using a suitable crimping tool, securely crimp the male terminals onto the male wires and the female terminals onto the female wires. Ensure a strong mechanical and electrical connection. The rubber seal should be positioned correctly to provide a watertight seal around the wire insulation.
- Insert Terminals into Housing: Carefully insert the crimped terminals into the corresponding male or female connector housing. Listen for a click, indicating the terminal is locked in place. Ensure the terminals are inserted in the correct orientation and pinout sequence for your application.
- Verify Sealing: Once all terminals are inserted, ensure the rubber seals are properly seated within the connector housing to prevent moisture ingress.
- Connect Connectors: Align the male and female connector housings and push them firmly together until they latch securely.
Always double-check your wiring diagram and connections before applying power.
5. Arahan Operasi
Once properly installed, these connectors function as passive electrical interfaces. Ensure the connectors are fully mated and latched to maintain their waterproof and secure connection. Avoid pulling on the wires directly to disconnect; always grasp the connector housings firmly.
6. Penyelenggaraan
These connectors are designed for durability and minimal maintenance. However, periodic inspection is recommended, especially in harsh environments:
- Pemeriksaan Visual: Check for any signs of physical damage, cracks, or discoloration on the connector housings.
- Integriti Meterai: Ensure the rubber seals are still intact and properly seated. Replace any damaged or missing seals.
- Keselamatan Sambungan: Verify that the connectors remain securely latched.
- Pembersihan: If exposed to dirt or debris, gently clean the exterior of the connectors with a damp cloth. Avoid using harsh chemicals that could degrade the plastic or rubber materials.
7. Penyelesaian masalah
Most issues with electrical connectors stem from improper installation. Here are some common problems and their solutions:
- No Electrical Connection:
- Check if terminals are fully crimped and inserted correctly into the housing.
- Ensure the male and female connectors are fully mated and latched.
- Verify continuity of wires and terminals using a multimeter.
- Water or Moisture Ingress:
- Ensure all rubber seals are present, undamaged, and correctly seated around the wires and within the connector housing.
- Confirm the connector housings are fully latched, creating a tight seal.
- Sambungan longgar:
- Inspect terminals for proper crimp and ensure they are securely locked into the housing.
- Check for any deformation in the connector pins or sockets.
8. Petua Pengguna
- AmpPeringkat erage: While a general voltage rating of 415V is provided, the actual amperage capacity depends heavily on the wire gauge used with the terminals. Always match your wire gauge to the current requirements of your circuit and ensure the terminals are rated for that current. Consult a wire gauge chart for appropriate current handling.
- Crimping Tool: Using a high-quality, dedicated crimping tool for automotive terminals will significantly improve the reliability and longevity of your connections.
- Sambungan Ujian: After assembly, always test your connections for continuity and proper function before final deployment.
9. Waranti dan Sokongan
For any questions regarding the product, technical support, or warranty claims, please contact the seller directly through your purchase platform. Ensure you have your order details available for faster assistance.
