1. Pengenalan
The DH Python Series Brushless Electronic Speed Controller (ESC) is a high-performance, 32-bit microprocessor-controlled device designed for RC boats and underwater thrusters. It offers precise control, high reliability, and efficient power management for various marine applications. This manual provides essential information for the proper setup, operation, and maintenance of your Python Series ESC.
2. Ciri-ciri
- Advanced MOSFET Technology: Utilizes a new generation of MOSFETs for low heat generation, instant large current handling, and high reliability.
- High-Performance Microprocessor: Equipped with a powerful 32-bit microprocessor for enhanced computing ability, faster response, smoother startup, and accurate throttle linearity.
- Reka bentuk kalis air: The ESC is waterproof and glued, featuring a flat water-cooling design for efficient heat dissipation.
- Dual Running Modes: Supports two operational modes: "Forward Only" and "Forward and Backward" for diverse applications.
- Kecekapan Tenaga: Incorporates synchronous rectification to significantly reduce heating, leading to higher driving efficiency and energy savings.
- Optimized Circuit Design: Control board and power board are designed separately, improving reliability and anti-interference capabilities, especially under high power conditions.
- Powerful SBEC: Built-in upgraded high-power switching BEC, adjustable between 5V/6V, with a continuous output current of 8A and burst current up to 15A, capable of driving stronger servos and external devices.
- Pelbagai Perlindungan: Includes Start-up Protection, Over-Heat Protection, Low-Voltage Cutoff Protection, Phase Loss Protection, and Signal Loss Protection.
3. Spesifikasi
The following table details the specifications for various models within the DH Python Series ESC line:
| taip | PN#Model | Samb./Arus Meletus(A) | Sel bateri NiXX\Lipo | Berat(g) | Keluaran BEC | Saiz(mm) L*W*H | Program Pengguna |
|---|---|---|---|---|---|---|---|
| Python 20A SBEC | 7020210 | 20\30A | 5-12NC\2-4Lipo | 30 | 5.5V/4A | 62*30*9 | ya |
| Python 30A SBEC | 7030210 | 30\40A | 5-12NC\2-4Lipo | 31 | 5.5V/4A | 62*30*9 | ya |
| Python 40A SBEC | 7040210 | 40\55A | 5-12NC\2-4Lipo | 40 | 5V/6V 4A | 75*32*9 | ya |
| Python 50A SBEC | 7050210 | 50\65A | 5-12NC\2-4Lipo | 41 | 5V/6V 4A | 75*32*9 | ya |
| Python 60A SBEC | 7060210 | 60\80A | 5-18NC\2-6Lipo | 70 | 5V/6V 8A | 72*40*12.5 | ya |
| Python 80A SBEC | 7080210 | 80\100A | 5-18NC\2-6Lipo | 90 | 5V/6V 8A | 96*43.5*13 | ya |
| Python 100A SBEC | 7100210 | 100\120A | 5-18NC\2-6Lipo | 100 | 5V/6V 8A | 96*43.5*13 | ya |
Sifat Produk Umum:
- Bahan: Bahan Komposit
- For Vehicle Type: Bot
- RC Parts & Accs: Pengawal Kelajuan
- Syorkan Umur: 14+ tahun
- Pensijilan: CE
- Adakah Elektrik: No Battery (refers to the ESC itself not containing a battery)
- Adakah Bateri Termasuk: Tidak
- Kuantiti: 1 pcs
4. Persediaan
Proper setup is crucial for the safe and efficient operation of your ESC. Follow these general guidelines:
- Sambungan Motor: Connect the three motor wires to the three output wires of the ESC. These typically use 3.5mm banana plugs. Ensure secure connections.
- Sambungan Bateri: Connect the battery to the power input wires of the ESC. The ESC typically uses an XT60 plug for battery connection. Ensure correct polarity (red to positive, black to negative).
- Sambungan Penerima: Connect the signal cable from the ESC to the throttle channel of your RC receiver.
- Penyejukan Air: Ensure the water cooling system is properly connected and functioning to dissipate heat from the ESC.
- Pemasangan: Securely mount the ESC in your RC boat or thruster, ensuring it is protected from physical damage and has adequate airflow for cooling (in addition to water cooling).
5. Arahan Operasi
Once the ESC is correctly installed and connected, follow these steps for operation:
- Hidupkan kuasa: Turn on your RC transmitter first, then connect the battery to the ESC. The ESC will perform a self-test and emit a series of beeps.
- Penentukuran Pendikit: If necessary, calibrate the throttle range according to your transmitter's instructions. The Python Series ESC features super smooth startup and accurate throttle linearity.
- Mod Larian: The ESC supports two running modes:
- "Forward Only": For applications requiring only forward motion.
- "Forward and Backward": For applications requiring both forward and reverse capabilities. This mode is suitable for most RC boats and underwater thrusters.
- Operasi Biasa: Use your transmitter's throttle stick to control the motor speed. The advanced 32-bit microprocessor ensures a responsive and stable control experience.
- Matikan: Disconnect the battery from the ESC first, then turn off your RC transmitter.
6. Pengaturcaraan
The DH Python Series ESC offers flexible programming options to customize its parameters:
- LCD Program Card: An external LCD program card (e.g., ZTW LCD Program Card G2) can be used for easy and convenient parameter adjustment.
- Apl Telefon: Programming can also be done via a dedicated phone application, requiring an additional ZTW App Adapter.
- Pemancar: Basic programming can be performed directly through your RC transmitter. Refer to the specific programming instructions for detailed steps.
7. Penyelenggaraan
To ensure the longevity and optimal performance of your ESC, consider the following maintenance tips:
- Pemeriksaan Berkala: Periodically check all connections (motor, battery, receiver) for any signs of wear, corrosion, or loose contacts.
- Pembersihan: Although the ESC is waterproof, it's good practice to gently clean any dirt or debris from its surface after use, especially around the water cooling inlets/outlets.
- Pengurusan Haba: Always ensure the water cooling system is clear and functioning correctly. Blockages can lead to overheating and damage.
- Storan: Simpan ESC di tempat yang kering dan sejuk, jauh daripada cahaya matahari langsung dan suhu yang melampau.
8. Penyelesaian masalah
The Python Series ESC is equipped with multiple protection features to prevent damage. If you encounter issues, consider the following:
- No Power/Response: Check battery connection, battery charge level, and receiver connection. Ensure the ESC is properly armed.
- Gagap Motor/Operasi Tidak Teratur: Verify motor wire connections, check for motor damage, and ensure correct throttle calibration.
- Terlalu panas: Check the water cooling system for blockages or leaks. Ensure the ESC is not overloaded (e.g., using too large a propeller or motor for the ESC's rating).
- Pengaktifan Perlindungan: The ESC features Start-up Protection, Over-Heat Protection, Low-Voltage Cutoff Protection, Phase Loss Protection, and Signal Loss Protection. If the ESC stops working unexpectedly, these protections might have been triggered. Identify the cause (e.g., low battery voltage, high temperature) and rectify it before resuming operation.
9. Petua Pengguna
- Keserasian: The Python Series ESC shares similarities with ZTW Shark ESCs, particularly regarding programming options. If you are familiar with ZTW Shark programming cards or apps, they may be compatible with this ESC (verify specific models).
- Keluaran BEC: The adjustable 5V/6V 8A SBEC is powerful enough for most standard and high-torque servos. Ensure your servos and other connected devices operate within these voltage had.
10. Waranti dan Sokongan
For any technical assistance, warranty claims, or support inquiries, please contact the seller or manufacturer directly. Keep your purchase records handy for faster service.
