Manual Arahan Pemula Kereta Baseus 2-dalam-1, Bank Kuasa dan Pemampat Udara

1. Pengenalan

The Baseus 2-in-1 device is a versatile tool designed for automotive emergencies and daily convenience. It combines a powerful car jump starter, an air compressor for tire inflation, a portable power bank for charging electronic devices, and an emergency light. This manual provides essential information for safe and effective operation of your device.

2. Maklumat Keselamatan

• Baca semua arahan dengan teliti sebelum digunakan.
• Jauhkan peranti daripada kanak-kanak.
• Do not disassemble or modify the device. Unauthorized modifications may lead to hazards and void the warranty.
• Gunakan di kawasan pengudaraan yang baik.
• Avoid exposing the device to extreme temperatures (below -10°C or above 60°C), direct sunlight, or high humidity.
• Ensure correct polarity when connecting the jump starter clamps to a car battery to prevent damage and injury. The smart clamp features reverse polarity protection with an audible alarm.
• Do not continuously inflate for more than 20 minutes to prevent overheating. Allow the device to cool down between uses if necessary.
• The device incorporates 12 battery protection features: Over-voltage, Bawah voltage, Over-current, Over-discharge, Charge overheating, Charge low-temperature, Discharge overheating, Discharge low-temperature, Short circuit, Reverse polarity charging, Anti-reverse charging, and Start-up timeout protection.

3. Kandungan Pakej

Sila semak pakej untuk item berikut:

• Baseus 2-in-1 Jump Starter, Power Bank, and Air Compressor
• Pintar Clamp with Reverse Polarity Protection
• Selang Inflasi
• Various Nozzles (e.g., for car tires, motorcycle tires, bicycle tires, basketballs, balloons)
• Kabel Pengecas USB
• Beg Simpanan
• Manual Pengguna

4. Produk Lebihview

The Baseus 2-in-1 device integrates multiple functions into a compact design:

• Paparan Digital LED: Shows current battery level and tire pressure.
• Butang Kawalan:
• Power Display Button: Press to check power level.
• Butang '+': Increase air pressure preset value. Long-press to speed up.
• '-' Butang: Decrease air pressure preset value. Long-press to slow down.
• Butang Suis Mod: Press to switch between inflation modes (Car, Motorcycle, Bicycle, Ball, Balloon). Long-press for 2 seconds to switch displayed units (PSI-BAR-KPA).
• Butang Cahaya: Long-press for 2 seconds to turn on flashlight. Press again to change lighting modes.
• Start/Stop Inflation Button: Press to start inflation as preset value. Press again to stop.
• Pelabuhan: Type-C input/output, USB output, EC5 Engine Start port.
• Komponen Dalaman: Features a 19-cylinder high-pressure pump and a copper permanent magnet motor for powerful and stable operation.

5. Persediaan

5.1 Mengecas Peranti

Before first use, fully charge the jump starter. It is recommended to keep the device charged above 75% for optimal jump-starting performance, and above 50% for zero-voltage bermula.

• Connect the provided USB charging cable to the Type-C input port on the device.
• Connect the other end of the cable to a compatible USB power adapter (e.g., 5V/2.4A or 9V/2A).
• Paparan LED akan menunjukkan kemajuan pengecasan. Pengecasan penuh mengambil masa kira-kira 3 jam.

6. Arahan Operasi

6.1 Jump Starting a Car

This device is suitable for 12V/4.0L gasoline cars and 12V/2.5L diesel cars.

1. Sambungkan Smart Clamps: Pasang cl pintaramps into the EC5 port of the jump starter. The indicator on the smart clamp akan berkelip merah dan hijau secara berselang-seli.
2. Sambungkan ke Bateri Kereta: Open the engine hood of your car. Connect the red clamp ke terminal positif (+) bateri kereta dan cl hitamamp to the negative (-) terminal. Ensure polarities are connected properly. If connected incorrectly, the smart clamp will sound a buzzing alarm.
3. Mulakan Kereta: Go back into your car and start the engine. The jump starter will discharge high voltage after it's connected.
4. Putuskan sambungan: After your car starts, please disconnect the jump starter immediately.

Nota: For better effect, please make sure the battery level of the jump starter is above 50% for zero-voltage start, and above 75% for normal start. Keep the entire jump start process within 30 seconds.

6.2 Inflating Tires and Other Items

The device features a 19-cylinder high-pressure pump for ultra-fast inflation with auto-stop functionality.

1. Connect Hose and Nozzle: Connect the inflation hose to the device and attach the appropriate nozzle for your item (car tire, motorcycle tire, bicycle tire, basketball, balloon).
2. Pilih Mod: Press the mode switch button to select the desired inflation mode. Default pressures are:
   • Car mode: 2.5 BAR (adjustable range: 1.8-2.8 BAR)
   • Motorcycle mode: 2.6 BAR (adjustable range: 1.8-2.8 BAR)
   • Bike mode: 45 PSI (adjustable range: 30-50 PSI)
   • Ball mode: 8.0 PSI (adjustable range: 7-9 PSI)
   • Balloon mode: 8.0 PSI (adjustable range: 7-9 PSI)
3. Laraskan Tekanan: Use the '+' and '-' buttons to set your desired pressure.
4. Mulakan Inflasi: Press the start inflation button. The device will automatically stop when the preset pressure is reached.

Nota: After your turn on the inflation mode, it will begin to test the tire pressure and display the number on the LED screen. One continuous inflation time must not exceed 20 minutes. The actual use may be slightly different depending on specific circumstances.

6.3 Menggunakan sebagai Power Bank

The device can also function as a portable power bank to charge your electronic devices.

• Connect your phone, tablet, or other compatible device to the USB output port (5V/3A) or the Type-C port (5V/2.4A Max, 9V/2A Max).
• The device provides two 15W output ports for fast charging.

6.4 Using the Emergency Light

The built-in emergency light is useful in low-light conditions or emergencies.

1. Hidupkan: Long-press the light button for 2 seconds to turn on the flashlight function (Normal lighting mode).
2. Tukar Mod: Press the light button again to cycle through different lighting modes:
   • Normal lighting (for general illumination)
   • SOS mode (flashing alternately, for signaling help)
   • Strobing mode (alarmingly bright, to scare away danger)

7. Penyelenggaraan

• Pastikan peranti bersih dan kering. Lap dengan lembut, damp kain jika perlu.
• Simpan peranti di tempat yang sejuk dan kering, jauh dari cahaya matahari langsung dan suhu yang melampau.
• If the device is not used for an extended period, recharge it periodically (e.g., every 3-6 months) to maintain battery health and prolong its lifespan.
• Elakkan daripada menjatuhkan peranti atau terkena impak yang kuat.
• Jangan gunakan bahan kimia yang keras atau pembersih yang melelas pada peranti.

8. Penyelesaian masalah

• Device not charging / Battery level stuck: Ensure you are using a compatible charger with the correct voltage dan amperage (e.g., 9V/2A or 5V/2.4A). Check the Type-C cable and port for damage.
• Car not starting: Verify the jump starter's battery level is sufficient (above 75% for normal start, above 50% for zero-voltage start). Check that the smart clamps are connected correctly to the car battery terminals (red to positive, black to negative). If an alarm sounds, correct the polarity. Ensure the car battery is not severely damaged or completely dead beyond the device's capacity.
• Inflation issues: Check that the inflation hose is securely connected to both the device and the item's valve. Ensure the correct inflation mode and preset pressure are selected. If the device stops prematurely, check if the 20-minute continuous inflation limit has been reached and allow it to cool down.
• Peranti terlalu panas: If the device feels excessively hot, stop use immediately and allow it to cool down in a well-ventilated area. Avoid continuous operation for prolonged periods, especially during inflation.

9. Spesifikasi

10. Petua Pengguna

• For optimal performance when jump starting a vehicle, ensure the jump starter is sufficiently charged (above 75%).
• When inflating, avoid exceeding 20 minutes of continuous operation to prevent overheating and ensure device longevity.
• If the device is not charging properly, verify that you are using a compatible charger with the correct voltage dan amperage (e.g., 9V/2A or 5V/2.4A).
• The device can inflate various items like car tires, motorcycle tires, bicycle tires, basketballs, and balloons. Always select the appropriate mode and preset pressure for best results.
• The device is designed to operate in a wide temperature range (-10°C to 60°C), making it reliable in various weather conditions.

11. Waranti dan Sokongan

For warranty information and customer support, please refer to the seller's policies or contact Baseus customer service directly. Keep your proof of purchase for any claims.

12. Video Operasi Produk