1. Pengenalan
This manual provides essential information for the installation, operation, and maintenance of the KEBA CP033/T controller and OP 341/P-6400 operation panel. This system, identified as I1075 PLC (K2-200), is a comprehensive control solution designed for injection molding machines. It includes the main controller unit, an intuitive operation panel, and all necessary connecting cables for a complete setup.
The system is engineered to provide precise control and monitoring capabilities for various injection molding processes, ensuring efficiency and reliability.
2. Arahan Persediaan
Before beginning installation, ensure all components are present and undamaged. The complete set typically includes the operation panel, the controller unit, connecting cables, and a Compact Flash memory card.
2.1 Pengenalan Komponen
- KEBA CP033/T Controller: The main processing unit.
- KEBA OP 341/P-6400 Operation Panel: The user interface with display and input keys.
- Menyambung Kabel: For communication and power between components.
- Compact Flash Kenco K2 (256MB): Memory module for system software and data.
2.2 Connecting the Controller and Panel
Refer to the rear panel of the CP033/T controller for connection ports. Ensure all connections are secure and correctly aligned to prevent damage.
- Sambungan Kuasa: Connect the power supply to the designated power input on the CP033/T controller.
- Sambungan Panel: Use the provided connecting cables to link the OP 341/P-6400 operation panel to the controller. Typically, this involves a dedicated panel link port.
- Sambungan I/O: Connect the necessary input/output wiring from the injection molding machine to the I/O terminals on the controller.
- Network/Communication: If required, connect Ethernet or CAN bus cables for network communication with other systems or for programming.
- USB/Sensor Ports: Utilize USB or sensor ports as needed for peripherals or additional sensors.
- Kad Memori: Insert the Compact Flash Kenco K2 (256MB) memory card into its slot on the controller.
Penting: Initial programming or configuration specific to your injection molding machine model may be required after physical installation. Consult your machine's documentation or a qualified technician for this step.
3. Arahan Operasi
The OP 341/P-6400 operation panel serves as the primary interface for controlling and monitoring the injection molding machine.
3.1 Susun atur Panel
- Skrin Paparan: Shows machine status, parameters, and operational menus.
- Kekunci Fungsi (F1-F8): Programmable keys for quick access to specific functions. Their labels may change depending on the active screen.
- Papan kekunci angka: For entering numerical values and data.
- Navigation Keys (Arrow Keys): Used to navigate through menus and adjust parameters.
- Kunci ESC: To exit current menus or cancel operations.
- Enter Key (Green): To confirm selections or input.
- Butang Kuasa: To turn the panel on/off or initiate system shutdown.
- Special Function Icons: Various icons represent specific machine functions (e.g., heating, injection, clamping, safety). Refer to the machine's specific software documentation for detailed icon meanings.
3.2 Urutan Operasi Asas
- Hidupkan kuasa: Press the Power button on the operation panel. The system will boot up and display the main operating screen.
- Pilih Mod: Use the function keys or navigation keys to select the desired operating mode (e.g., Manual, Semi-Automatic, Automatic).
- Pelarasan Parameter: Navigate to the parameter settings screen to adjust values such as temperature, pressure, injection speed, and cycle time. Use the numeric keypad for input and the Enter key to confirm.
- Mulakan Kitaran: Once parameters are set and safety conditions are met, initiate the molding cycle using the designated start button or function key.
- Pemantauan: Continuously monitor the machine status and process values on the display screen.
- Hentian kecemasan: In case of an emergency, activate the machine's emergency stop button immediately.
- Matikan: Follow the system's shutdown procedure, typically by pressing and holding the Power button or selecting a shutdown option from a menu.
Always refer to the specific software interface and the injection molding machine's operational manual for detailed instructions relevant to your application.
4. Penyelenggaraan
Regular maintenance ensures the longevity and optimal performance of your KEBA control system.
- Pembersihan: Keep the operation panel and controller unit clean and free from dust, debris, and liquids. Use a soft, dry cloth for cleaning. Avoid abrasive cleaners or solvents.
- Pemeriksaan Sambungan: Periodically inspect all connecting cables and terminals for secure connections. Ensure there are no loose wires or signs of corrosion.
- Keadaan Persekitaran: Ensure the control system operates within its specified environmental conditions (temperature, humidity) to prevent damage.
- Software Backups: Regularly back up the system's software and configuration data from the Compact Flash card to prevent data loss.
- Pemeriksaan Visual: Conduct routine visual inspections for any signs of physical damage, overheating, or unusual wear on any component.
For any internal maintenance or repairs, it is recommended to contact qualified service personnel.
5. Penyelesaian masalah
Bahagian ini menyediakan panduan umum untuk isu-isu biasa. Untuk masalah yang rumit, sila rujuk juruteknik yang berkelayakan.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Sistem tidak dihidupkan. | No power supply, loose power cable, faulty power button. | Check power source and cable connections. Ensure the power button is pressed correctly. |
| Paparan panel kosong. | Loose display cable, panel not powered, software issue. | Verify panel-to-controller cable connection. Restart the system. If issue persists, contact support. |
| Machine functions not responding. | Incorrect programming, I/O wiring issue, emergency stop active. | Check I/O connections. Ensure no emergency stop is engaged. Verify machine program. |
| Ralat atau amaran sistem. | Software malfunction, sensor error, hardware fault. | Note the error code/message. Refer to the machine's specific error manual. Restart the system. |
If troubleshooting steps do not resolve the issue, please contact technical support.
6. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenis Produk | Control System for Injection Molding Machine |
| Jenama | KEBA |
| Model Pengawal | CP033/T |
| Operation Panel Model | OP 341/P-6400 |
| Jenis PLC | I1075 (K2-200) |
| Modul Memori | Compact Flash Kenco K2 (256MB) |
| Penyesuaian | ya |
| asal usul | Tanah Besar China |
| Dimensi Pakej (anggaran) | Panjang: 60 cm, Lebar: 40 cm, Tinggi: 20 cm |
| Berat Pakej (anggaran) | 14.0 kg |
7. Petua Pengguna
- Pengaturcaraan Awal: Verify if the control system requires initial programming or configuration specific to your injection molding machine model before full operation. This is crucial for proper functionality.
- Dokumentasi: Always keep the specific software interface manual and the injection molding machine's operational manual handy for detailed instructions and error codes.
- Kebersihan: Maintain a clean environment around the control system to prevent dust and debris from affecting performance.
8. Waranti dan Sokongan
For any technical assistance, warranty inquiries, or support, please contact the seller or the manufacturer directly. Ensure you have your product model numbers (CP033/T, OP 341/P-6400, I1075 PLC, K2-200) available when seeking support.
The seller, "injection molding machine parts Store", can be contacted for further assistance.
