1. Produk Lebihview
This manual provides instructions for the WORX 20V Wide Interface Battery Chargers, including models WA3924, WA3927, and WA3922. These chargers are designed to efficiently charge WORX 20V wide interface battery packs for various power tools.
2. Persediaan dan Keserasian
Before using your WORX 20V battery charger, ensure it is properly set up and compatible with your battery packs.
2.1 Sambungan Kuasa
The charger is designed for an input voltage of 110-240V ~50/60Hz. The basic plug configuration is US standard; however, an appropriate adapter will be provided based on your country's electrical standards.
2.2 Keserasian Bateri
These chargers are specifically designed for WORX wide interface 20V battery packs. Ensure your battery pack has the correct interface for proper connection and charging. Incompatible batteries may not charge or could cause damage.
3. Arahan Operasi
Follow these steps to charge your WORX 20V battery pack:
- Sambungkan pengecas ke salur keluar kuasa yang sesuai.
- Align the battery pack with the charger's interface and slide it firmly into place until it clicks.
- Observe the indicator lights on the charger to monitor the charging status.
- Once charging is complete, disconnect the battery pack from the charger.
- Cabut palam pengecas daripada salur keluar kuasa apabila tidak digunakan.
3.1 Lampu Penunjuk
The chargers feature indicator lights to communicate the charging status and any potential issues:
- Ikon Bateri: Indicates the charging status (e.g., solid light for charging, blinking for fully charged, or off).
- Ikon Suhu: Illuminates if the battery or charger is too hot or too cold, preventing charging until a safe temperature is reached.
- Lock/Exclamation Mark Icon: Indicates a fault or error with the battery or charger. Refer to the troubleshooting section if this light appears.
4. Penyelenggaraan
Proper maintenance ensures the longevity and safe operation of your charger:
- Keep the charger clean and free from dust and debris. Use a dry cloth to wipe surfaces.
- Store the charger in a dry environment, away from direct sunlight and extreme temperatures.
- Do not expose the charger to moisture or liquids.
- Regularly inspect the power cord for any signs of damage. If damaged, discontinue use and contact support.
5. Penyelesaian masalah
Jika anda menghadapi masalah dengan pengecas anda, rujuk kepada masalah dan penyelesaian biasa berikut:
- Pengecas tidak dihidupkan: Ensure the charger is securely plugged into a working power outlet. Check the power cord for damage.
- Bateri tidak dicas: Verify that the battery is correctly inserted into the charger. Check the battery for damage. If the temperature indicator is on, allow the battery or charger to reach a suitable temperature.
- Error indicator light (Lock/Exclamation Mark) is on: This indicates a fault. Try re-inserting the battery. If the error persists, the battery or charger may be defective. Contact customer support.
6. Spesifikasi
Detailed specifications for each WORX 20V Battery Charger model:
| Ciri | WA3924 | WA3927 (Double Charger) | WA3922 (Fast Charger) |
|---|---|---|---|
| Input Voltage | 110-240V ~50/60Hz | ||
| Keluaran Voltage | 20V ~ 2A | 20V~2A (per slot) | 20V ~ 6A |
| kuasa | 40W | 50W | 160W |
| Charging Time (4Ah battery) | <2 Jam | <2 Hour (single 4Ah) <3 Hour (two 4Ah simultaneously) | <40 Min |
| Pensijilan | CE | ||
| asal usul | Tanah Besar China | ||
7. Petua Pengguna
- Always ensure the battery is fully seated in the charger to establish a proper connection.
- Avoid charging batteries in extremely hot or cold environments, as this can affect charging efficiency and battery lifespan.
- For optimal battery life, allow batteries to cool down after heavy use before placing them on the charger.
8. Waranti dan Sokongan
For warranty information, technical support, or service inquiries, please contact the seller or WORX customer service directly. Keep your purchase receipt as proof of purchase.
