VTOMAN X3 Jump Starter with Air Compressor and V-Truck Pro Jump Starter User Manual

1. Pengenalan

This manual provides detailed instructions for the safe and effective use of your VTOMAN X3 Jump Starter with Air Compressor and VTOMAN V-Truck Pro Jump Starter. These devices are designed to provide reliable power for jump-starting vehicles and other emergency needs. Please read this manual thoroughly before operation and retain it for future reference.

Pemula Lompat VTOMAN X3 dengan Pemampat Udara

The VTOMAN X3 is an all-in-one portable device combining a 3500A peak current jump starter, a 160 PSI air compressor, an LED light, an SOS alarm, and a USB charging port. It is designed for jump-starting vehicles with up to 9L gas or 8.5L diesel engines and for inflating tires with precision.

VTOMAN V-Truck Pro Jump Starter

The VTOMAN V-Truck Pro is a heavy-duty portable jump starter delivering an 8000A peak current. It is compatible with all 12V vehicles, including trucks, RVs, tractors, boats, and other large-displacement diesel engines. It also features a 41600mAh power bank with 65W fast charging capabilities for various electronic devices.

2. Maklumat Keselamatan

Always observe the following safety precautions to prevent personal injury or damage to the device and vehicle.

• Baca semua arahan sebelum digunakan.
• Pakai pelindung mata dan pakaian pelindung apabila bekerja dengan bateri.
• Ensure the work area is well-ventilated. Do not smoke or allow sparks or flames near the battery or jump starter.
• Keep the device dry. Do not expose it to rain or wet conditions.
• Jauhkan daripada kanak-kanak.
• Jangan cuba lompat-mulakan bateri beku.
• Jangan hubungkan cl positif dan negatifampbersama-sama.
• Disconnect the jump starter from the vehicle battery within 30 seconds after the vehicle starts.
• Do not over-inflate tires. Always monitor pressure during inflation.
• Jangan buka unit ini. Rujuk servis kepada kakitangan yang berkelayakan.

3. Produk Lebihview

VTOMAN X3 Components

• Port Pemula Lompat
• Pelabuhan Hos Udara
• Port Output USB
• Skrin Paparan LED
• Control Buttons (+, -, M)
• Lampu suluh LED

Image: The VTOMAN X3 unit displaying its LED screen with battery level, preset pressure, real-time pressure, tire pressure unit, and inflation mode indicators. Various buttons are visible for control.

VTOMAN V-Truck Pro Components

• Port Pemula Lompat
• Port Input DC
• Port Input/Output USB-C
• USB-A Output Ports (A1, A2)
• Petunjuk Bateri LED
• Butang Kuasa

Image: The VTOMAN V-Truck Pro jump starter connected to a vehicle battery with its heavy-duty clamps. The unit's ports and LED indicators are visible.

4. Persediaan

Pengecasan Awal

Before first use, fully charge your VTOMAN jump starter. It is recommended to fully charge the unit after each use and at least every 3-6 months to maintain battery health.

• VTOMAN V-Truck Pro: Connect the provided 65W charger to the DC input port. A full charge takes approximately 2.5 hours for the 41600mAh battery.
• VTOMAN X3: Connect a compatible USB-C charger to the USB-C input port. The LED screen will indicate charging status.

Image: The VTOMAN V-Truck Pro unit acting as a portable power bank, charging a smartphone, iPad, earphone, smart watch, camera, drone, and game console via its USB ports.

5. Arahan Operasi

5.1. Lompat Memulakan Kenderaan

Ensure your jump starter is sufficiently charged before attempting to jump-start a vehicle.

1. Matikan pencucuh kenderaan dan semua aksesori (lampu, radio, dll.).
2. Sambungkan cl merah (+).amp of the jumper cables to the positive (+) terminal of the vehicle's dead battery.
3. Sambungkan cl hitam (-).amp of the jumper cables to the negative (-) terminal of the vehicle's dead battery, or to a solid, unpainted metal part of the vehicle's chassis away from the battery.
4. Insert the jumper cable plug firmly into the jump starter's jump start port.
5. Start the vehicle's engine. If it does not start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds per attempt.
6. Once the vehicle starts, immediately disconnect the jumper cable plug from the jump starter.
7. Remove the black (-) clamp from the vehicle, then remove the red (+) clamp.

Keserasian Enjin:

• VTOMAN X3: Up to 9L Gas / 8.5L Diesel Engines.
• VTOMAN V-Truck Pro: All Gas / All Diesel Engines (12V vehicles).

Image: The VTOMAN X3 jump starter connected to a car battery, demonstrating the jump-starting process. The unit's display shows operational status.

5.2. Using the Air Compressor (VTOMAN X3 Only)

The VTOMAN X3 features a 160 PSI air compressor with auto-shutoff.

1. Screw the air hose onto the tire valve stem.
2. Connect the other end of the air hose to the air hose port on the VTOMAN X3.
3. Power on the X3 unit. The LED screen will display the current tire pressure.
4. Press the 'M' button to cycle through preset modes (Car, Motorcycle, Bicycle, Ball, Custom) or to select desired pressure units (PSI, KPA, BAR).
5. Use the '+' and '-' buttons to set the target pressure.
6. Press the power button to start inflation. The compressor will automatically stop once the target pressure is reached.
7. Disconnect the air hose from the tire valve and the X3 unit.

Image: The VTOMAN X3 unit connected to a car tire valve, actively inflating the tire. The digital display shows the pressure reading and inflation status.

5.3. Menggunakannya sebagai Bank Kuasa Mudah Alih

Both VTOMAN jump starters can charge electronic devices.

• Connect your device's USB charging cable to the appropriate USB-A or USB-C output port on the jump starter.
• Peranti akan mula mengecas.
• VTOMAN V-Truck Pro: Features a 41600mAh capacity and 65W fast charging output, capable of charging a smartphone approximately 8-10 times.

5.4. Using the LED Light / SOS Function (VTOMAN X3 Only)

The VTOMAN X3 includes an integrated LED flashlight with SOS capabilities.

• Press and hold the dedicated light button (if available) or the power button (refer to specific model instructions) to turn on the LED light.
• Press again to cycle through different modes (e.g., steady on, strobe, SOS).
• Tekan dan tahan untuk mematikan.

6. Penyelenggaraan

Proper maintenance ensures the longevity and optimal performance of your VTOMAN jump starter.

• Pembersihan: Lap unit dengan kain kering dan lembut. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
• Storan: Simpan jump starter di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung dan suhu yang melampau.
• Mengecas semula: Recharge the unit fully after each use. If not used frequently, recharge at least every 3-6 months to prevent deep discharge and prolong battery life.
• Pemeriksaan Kabel: Regularly inspect jumper cables and air hoses for any signs of damage, wear, or corrosion. Replace if necessary.

7. Penyelesaian masalah

If you encounter issues with your VTOMAN jump starter, refer to the following common problems and solutions.

8. Spesifikasi

9. Waranti dan Sokongan

For detailed warranty information, please refer to the official VTOMAN website or the warranty card included with your product packaging. For technical support, troubleshooting assistance, or replacement parts, please contact VTOMAN customer service through their official channels.