Phanteks XT View Matrix Mid-Tower Gaming Case Instruction Manual

1. Pengenalan

The Phanteks XT View Matrix is a high-performance mid-tower gaming case designed for enthusiasts. It features an immersive 600 LED Matrix screen, dual tempered glass panels, and optimized airflow for superior cooling. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case.

Image 1.1: The Phanteks XT View Matrix Mid-Tower Gaming Case, showcasing its white exterior and vibrant RGB fans visible through the tempered glass panels.

2. Maklumat Keselamatan

Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in injury or damage to the product.

• Sentiasa putuskan sambungan bekalan kuasa dari soket dinding sebelum melakukan sebarang pemasangan atau penyelenggaraan.
• Elakkan mendedahkan bekas kepada kelembapan atau suhu yang melampau.
• Kendalikan panel kaca terbaja dengan berhati-hati untuk mengelakkan pecah.
• Keep small components and tools away from children.
• Pastikan pembumian yang betul untuk mengelakkan bahaya elektrik.

3. Panduan Pemasangan

This section outlines the steps for installing your PC components into the Phanteks XT View Matrix case.

3.1. Menyediakan Kes

Remove the side panels by unscrewing the thumbscrews at the rear of the case and gently sliding the panels off. For tempered glass panels, exercise caution.

Imej 3.1: Dalaman view of the case, highlighting various mounting points for components such as fans, storage drives, and cable management routes.

3.2. Pemasangan Papan Induk

1. Pasangkan pelindung I/O ke dalam bukaan belakang bekas.
2. Align your motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's screw holes.
3. Selamatkan papan induk dengan skru yang disediakan.

3.3. Pemasangan Unit Bekalan Kuasa (PSU).

1. Cari kawasan pelekap PSU di bahagian bawah belakang kes itu.
2. Luncurkan PSU ke dalam ruang yang ditetapkan.
3. Selamatkan PSU dengan skru dari belakang kes itu.

Imej 3.2: Bahagian belakang dalaman view of the case, illustrating the power supply unit (PSU) mounting area and various drive bays.

3.4. Pemasangan Pemacu Storan

The case supports multiple 2.5" SSDs and 3.5" HDDs. Refer to the case's internal layout for specific mounting locations.

• SSD 2.5": Mount SSDs to the dedicated 2.5" brackets, typically located behind the motherboard tray.
• HDD 3.5": Install HDDs into the drive cages, usually found beneath the PSU shroud.

3.5. Expansion Card (GPU) Installation

1. Tanggalkan penutup slot pengembangan yang diperlukan dari bahagian belakang bekas.
2. Insert your graphics card or other expansion cards into the appropriate PCIe slots on the motherboard.
3. Kencangkan kad dengan skru.

Imej 3.3: Satu dalaman view of the case with a graphics card, CPU cooler, and fans already installed, demonstrating component compatibility and layout.

3.6. Pemasangan Kipas dan Radiator

The XT View Matrix supports up to 9 x 120mm fan positions and full 360mm radiator support at the top. The case includes 3 M25-120 D-RGB fans.

• Mount additional fans or radiators to the designated areas using the provided screws.
• Connect fan and RGB cables to your motherboard or a compatible controller.

3.7. Pengurusan Kabel

Gunakan saluran penghalaan kabel dan titik pengikat di belakang dulang papan induk untuk menyusun kabel. Ini meningkatkan aliran udara dan estetika.

4. Arahan Operasi

4.1. Menghidupkan

After all components are installed and cables are connected, press the power button located on the front I/O panel to start your system.

4.2. Front I/O Ports

Panel I/O hadapan menyediakan akses mudah kepada:

• 1x USB-C 3.2 Gen2 port
• 1x port USB 3.0
• Butang Kuasa dan Tetapkan Semula
• Lighting control buttons (no software needed for basic control)
• Mic/Headphone jacks

4.3. 600 LED Matrix Display Control

The integrated 600 LED Matrix screen can display dynamic system statistics, animations, and custom visuals. To fully customize the display, download and install the Phanteks Nexlinq app.

Image 4.1: The 600 LED Matrix screen displaying dynamic content, with an overlay of the Phanteks Nexlinq app interface for customization.

Image 4.2: Various examples of information and patterns that can be displayed on the 600 LED Matrix screen, including system stats and custom graphics.

5. Penyelenggaraan

Penyelenggaraan tetap membantu memastikan prestasi optimum dan jangka hayat komponen PC anda.

5.1. Pembersihan

• Penapis Habuk: Periodically remove and clean the dust filters (if applicable) to maintain good airflow.
• Dalaman: Use compressed air to remove dust from inside the case, especially from fans and heatsinks.
• Luaran: Lap permukaan luar dengan lembut, damp kain. Elakkan pembersih yang kasar.

5.2. Penyelenggaraan Kipas

Ensure fans are free from obstructions and spinning correctly. If a fan becomes noisy or stops working, consider replacing it.

6. Penyelesaian masalah

Jika anda menghadapi masalah dengan binaan PC anda, pertimbangkan langkah penyelesaian masalah biasa berikut:

• Tiada Kuasa: Check all power connections, including the PSU to wall outlet, PSU to motherboard, and front panel power switch cable.
• Peminat Tidak Berputar/Tiada RGB: Verify fan and RGB cables are correctly connected to the motherboard or controller. Check software settings for RGB control.
• LED Matrix Display Issues: Ensure the display cable is securely connected. If using the Nexlinq app, check for software updates or reinstall the application.
• Terlalu panas: Ensure all fans are installed correctly and spinning. Check for dust buildup and clean filters. Verify proper thermal paste application on CPU.

7. Spesifikasi

8. Waranti dan Sokongan

For warranty information and technical support, please refer to the official Phanteks webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan bukti pembelian anda untuk tuntutan waranti.

Phanteks Official Webtapak: www.phanteks.com