QLYUEUI HCT-326 2-Outlet Automatic Watering Timer

1. Pengenalan

Thank you for choosing the QLYUEUI HCT-326 2-Outlet Automatic Watering Timer. This device is designed to simplify your garden and lawn irrigation by providing precise and programmable watering schedules. Please read this manual carefully before installation and operation to ensure proper use and longevity of your product.

2. Produk Lebihview

The HCT-326 watering timer features two independent outlets, allowing you to manage two separate watering zones with distinct schedules. Its clear LCD display and intuitive controls make programming straightforward.

Imej 1: Depan dan sisi view of the QLYUEUI HCT-326 watering timer, showing its dimensions (12.3cm/4.84in height, 12.0cm/4.72in front width, 5.5cm/2.17in side width) and the LCD display with control buttons. The display indicates current time, watering program settings (START TIME, HOW LONG, HOW OFTEN, NEXT START), and battery status. Two outlets are visible at the bottom, labeled A and B. The power supply requirement is 2*1.5 'AA' Alkaline Batteries (Not Included).

Komponen:

• Unit Utama: Housing the control panel, LCD display, and battery compartment.
• Penyambung Masuk: For attaching to a standard outdoor faucet.
• Outlet Connectors (A & B): For attaching garden hoses or irrigation lines.
• Butang Kawalan: NOW, A/B, ESC/OFF, OK, -, +, DELAY.
• Paparan LCD: Shows time, program settings, and status indicators.

3. Persediaan

3.1. Pemasangan Bateri

1. Cari petak bateri di belakang pemasa.
2. Buka penutup petak.
3. Insert two (2) 1.5V 'AA' Alkaline batteries, ensuring correct polarity (+/-). Batteries are not included.
4. Tutup penutup petak bateri dengan selamat untuk mengekalkan rintangan air.

3.2. Connecting the Timer

1. Screw the timer's inlet connector onto your outdoor faucet. Hand-tighten only; do not overtighten.
2. Attach your garden hoses or irrigation lines to the two outlet connectors (A and B) at the bottom of the timer. Ensure a secure connection to prevent leaks.

4. Arahan Operasi

The timer operates in various modes, indicated on the LCD display. Use the 'NOW' button to switch between setting the current time and programming watering schedules. Use the 'A/B' button to select which outlet (A or B) you are programming or controlling.

4.1. Menetapkan Masa Semasa

1. Press the 'NOW' button until the time display flashes.
2. Use the '+' and '-' buttons to adjust the hour and minute.
3. Tekan 'OK' untuk mengesahkan setiap tetapan.

4.2. Programming Watering Schedules

Each outlet (A and B) can be programmed independently.

1. Press the 'NOW' button to enter programming mode. The display will show 'START TIME', 'HOW LONG', 'HOW OFTEN', and 'NEXT START'.
2. Press 'A/B' to select the desired outlet (A or B) to program.
3. Tetapkan 'MASA MULA': Use '+' and '-' to set the desired start time for watering. Press 'OK' to confirm.
4. Set 'HOW LONG': Use '+' and '-' to set the duration of watering (e.g., 10 minutes, 1 hour). Press 'OK' to confirm.
5. Set 'HOW OFTEN': Use '+' and '-' to set the frequency (e.g., every 12 hours, every 2 days). Press 'OK' to confirm.
6. Repeat steps 2-5 for the other outlet if needed.
7. Press 'ESC/OFF' to exit programming mode.

4.3. Penyiraman Manual

1. Press the 'OK' button. The display will show options for manual watering.
2. Use 'A/B' to select the outlet (A or B) for manual watering.
3. Use '+' and '-' to set the desired duration for manual watering.
4. Tekan 'OK' untuk memulakan penyiraman manual.
5. To stop manual watering, press 'ESC/OFF'.

4.4. Fungsi Kelewatan

The delay function allows you to postpone the next scheduled watering cycle.

1. Tekan butang 'TUNDA'.
2. Use '+' and '-' to set the desired delay duration (e.g., 1 hour, 24 hours).
3. Tekan 'OK' untuk mengesahkan kelewatan. Pemasa akan menyambung semula jadualnya selepas tempoh kelewatan.

4.5. Mematikan Pemasa

To turn off all watering programs and stop the timer:

• Press and hold the 'ESC/OFF' button for a few seconds until the display indicates 'OFF' or the screen goes blank.

5. Penyelenggaraan

• Pembersihan: Bersihkan bahagian luar pemasa secara berkala dengan kain lembutamp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• Penggantian Bateri: Gantikan bateri apabila penunjuk bateri rendah muncul pada paparan untuk memastikan operasi berterusan.
• Penyimpanan Musim Sejuk: Before the first frost, disconnect the timer from the faucet and hoses. Drain any remaining water and store it indoors in a dry, frost-free location. Failure to do so may result in damage due to freezing water.

6. Penyelesaian masalah

• Pemasa tidak dihidupkan: Periksa pemasangan bateri dan pastikan bateri segar.
• Tiada aliran air: Ensure the faucet is fully open. Check for blockages in hoses or timer outlets. Verify that the watering program is active and the timer is not in 'OFF' or 'DELAY' mode.
• Kebocoran: Ensure all connections (faucet, hoses) are securely hand-tightened and that rubber washers are properly seated.
• Isu paparan: If the display is dim or erratic, replace the batteries.

7. Spesifikasi