AstroAI B0CN3325KB

AstroAI Digital Tire Pressure Gauge (Model: B0CN3325KB) Instruction Manual

Panduan komprehensif untuk persediaan, operasi dan penyelenggaraan.

pengenalan

Thank you for choosing the AstroAI Digital Tire Pressure Gauge. This manual provides detailed instructions for the safe and efficient use of your device. Please read it thoroughly before operation and retain it for future reference.

AstroAI Digital Tire Pressure Gauge, orange color

Image: The AstroAI Digital Tire Pressure Gauge in orange, showing its ergonomic design.

Persediaan

1. Pembukaan dan Pemasangan Bateri

Your AstroAI Digital Tire Pressure Gauge comes with pre-installed AAA batteries. If replacement is needed, follow these steps:

  1. Cari petak bateri di bahagian belakang peranti.
  2. Luncurkan penutup bateri dengan lembut.
  3. Masukkan dua bateri AAA, pastikan kekutuban (+/-) betul.
  4. Tutup penutup bateri dengan selamat.
Diagram showing battery compartment and AAA batteries

Imej: Dalaman view of the AstroAI Digital Tire Pressure Gauge showing the battery compartment with two AAA batteries.

2. Penyesuai Injap Presta

A Presta-to-Schrader adapter is included for compatibility with Presta valves, commonly found on road bikes. This adapter is stored within the battery compartment for convenience.

Presta valve adapter stored in the battery compartment

Image: Close-up of the battery compartment showing the small brass Presta valve adapter stored inside.

Arahan Operasi

1. Power On and Unit Selection

Press the "ON/UNIT/OFF" button to turn on the device. The display will illuminate. To cycle through measurement units (PSI, bar, kPa, kg/cm²), press the "ON/UNIT/OFF" button repeatedly until your desired unit is displayed.

Digital display showing PSI reading

Image: The digital screen of the gauge displaying a tire pressure reading in PSI.

2. Measuring Tire Pressure

For accurate readings, ensure tires are cool (at least 3 hours after parking). Remove the valve cap from the tire.

  1. Press the gauge nozzle firmly and vertically onto the tire valve stem.
  2. Hold it in place until the digital display shows a stable reading. The built-in flashlight assists in low-light conditions.
  3. Remove the gauge. The reading will remain on the display for a few seconds.
  4. Gantikan penutup injap.
Person using the tire pressure gauge on a car tire

Image: A hand holding the AstroAI Digital Tire Pressure Gauge against a car tire valve stem, showing the measurement process.

3. Matikan

The device will automatically shut off after 30-40 seconds of inactivity to conserve battery life. To manually turn it off, press and hold the "ON/UNIT/OFF" button for 3 seconds.

4. Demonstrasi Video

Video: A demonstration of the AstroAI G300 digital tire pressure gauge in use, showcasing its features and ease of measurement.

Penyelenggaraan

  • Keep the gauge clean and free from dirt or debris.
  • Simpan di tempat yang kering jauh dari suhu yang melampau.
  • Gantikan bateri dengan segera apabila penunjuk bateri lemah muncul untuk memastikan bacaan yang tepat.
  • The Presta valve adapter should be kept in its designated storage slot within the battery compartment to prevent loss.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Tiada paparan/Peranti tidak akan dihidupkanBateri mati atau tidak dipasang dengan betul.Periksa kekutuban bateri atau gantikan dengan bateri AAA baharu.
Bacaan tidak tepatGauge not firmly sealed on valve stem; tires are hot; low battery.Ensure a tight seal; measure tire pressure when tires are cool; replace batteries.
Display difficult to read in bright sunlightDirect sunlight glare.Shield the display from direct sunlight or move to a shaded area.

Spesifikasi

  • Jenama: Astro AI
  • model: B0CN3325KB
  • Bahan: Akrilonitril Butadiena Stirena (ABS)
  • Dimensi (L x W x H): 6.3 x 1 x 2.2 inci
  • Berat: 0.17 paun
  • Julat Pengukuran: 3-300 PSI
  • Ketepatan: ANSI B40.7 Grade 2A (±0.5%)
  • Unit Pengukuran: PSI, bar, kPa, kg/cm²
  • Sumber Kuasa: 2 x Bateri AAA
  • Komponen yang Disertakan: 1 x AstroAI Digital Tire Pressure Gauge, 1 x Presta Valve Adapter

Waranti dan Sokongan

AstroAI is committed to providing high-quality products. This digital tire pressure gauge is manufactured from superior materials. If any damages from transportation or malfunctions occur, this product can be returned. For further assistance or warranty claims, please contact AstroAI customer support.

Maklumat Hubungan: Please refer to the product packaging or the official AstroAI weblaman web untuk butiran sokongan pelanggan terkini.

© 2024 AstroAI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.