pengenalan
This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your JONR H2 Pro Cordless Wet Dry Vacuum Cleaner. Please read this manual thoroughly before using the appliance and retain it for future reference.
Arahan Keselamatan Penting
To reduce the risk of fire, electric shock, or injury, always follow basic precautions, including the following:
- Baca semua arahan sebelum menggunakan perkakas ini.
- Jangan gunakan di luar atau di permukaan basah.
- Jangan biarkan digunakan sebagai mainan. Perhatian yang rapi diperlukan apabila digunakan oleh atau berhampiran kanak-kanak.
- Gunakan hanya seperti yang diterangkan dalam manual ini. Gunakan hanya lampiran yang disyorkan pengilang.
- Jangan gunakan dengan kord atau palam yang rosak. Jika perkakas tidak berfungsi sebagaimana mestinya, telah terjatuh, rosak, ditinggalkan di luar rumah, atau terjatuh ke dalam air, kembalikannya ke pusat servis.
- Jangan tarik atau bawa dengan kord, gunakan kord sebagai pemegang, tutup pintu pada kord, atau tarik kord di sekeliling tepi atau sudut yang tajam. Jangan jalankan perkakas di atas kord. Jauhkan kord dari permukaan yang dipanaskan.
- Jangan cabut plag dengan menarik kord. Untuk mencabut palam, pegang palam, bukan kordnya.
- Jangan pegang palam atau perkakas dengan tangan yang basah.
- Jangan letakkan sebarang objek ke dalam bukaan. Jangan gunakan dengan mana-mana bukaan yang disekat; jauhkan daripada habuk, serabut, rambut dan apa sahaja yang boleh mengurangkan aliran udara.
- Jauhkan rambut, pakaian longgar, jari dan semua bahagian badan daripada bukaan dan bahagian yang bergerak.
- Jangan ambil apa-apa yang terbakar atau berasap, seperti rokok, mancis, atau abu panas.
- Jangan gunakan untuk mengambil cecair mudah terbakar atau mudah terbakar, seperti petrol, atau gunakan di kawasan yang mungkin terdapat.
- Jangan gunakan tanpa beg habuk dan/atau penapis di tempatnya.
- Matikan semua kawalan sebelum mencabut plag.
- Gunakan lebih berhati-hati semasa membersihkan di tangga.
- Jangan gunakan untuk mengambil bahan toksik (peluntur klorin, ammonia, pembersih longkang, dll.).
- Jangan gunakan di ruang tertutup yang terdapat wap daripada cat asas minyak, pencair cat, beberapa bahan kalis rama-rama, habuk mudah terbakar atau wap letupan atau toksik yang lain.
- Sambungkan ke alur keluar yang dibumikan dengan betul sahaja. Lihat arahan pembumian.
Produk Selesaiview
The JONR H2 Pro is a versatile cordless wet dry vacuum cleaner designed for efficient floor cleaning. It features hot water self-cleaning, an OdorLock system, powerful suction, and a lie-flat design for comprehensive coverage.
Rajah 1: Apa yang ada di dalam Kotak. This image displays the JONR H2 Pro Wet & Dry Vacuum Cleaner, Charging Station, Power Cord, User Manual, Maintenance Brush, and Floor Cleaning Solution.
Persediaan dan Perhimpunan
- Pemasangan Pemegang: Align the handle with the main body and push it firmly until it clicks into place.
Video 1: Handle Installation. This video demonstrates how to align and secure the handle onto the main body of the JONR H2 Pro (0:14-0:17).
- Persediaan Stesen Pengecasan: Connect the power cord to the charging station and plug it into a wall outlet. Place the charging station on a flat, stable surface.
Video 2: Charging Station Connection. This video shows how to connect the power plug to the charging station, indicating it is ready for use (0:17-0:26).
- Isi Tangki Air Bersih: Press the release button to detach the clean water tank. Fill it with clean water up to the maximum level. Add 1.5 to 2 capfuls of JONR cleaning solution. Securely close the tank lid and reattach the tank to the main body.
Video 3: Filling the Clean Water Tank. This video illustrates the process of filling the clean water tank with water and adding the cleaning solution, then reattaching it to the vacuum (0:26-0:47).
- Install Dirty Water Tank: Ensure the dirty water tank is properly closed and locked. Place it onto the base of the vacuum cleaner.
Video 4: Installing the Dirty Water Tank. This video demonstrates how to securely install the dirty water tank onto the vacuum cleaner's base (0:47-0:54).
Arahan Operasi
- Hidupkan kuasa: Tekan butang kuasa (⑂) on the handle to turn on the appliance. It will automatically start in Automatic Mode.
Video 5: Starting the Vacuum. This video shows pressing the power button to start the JONR H2 Pro in Automatic Mode (0:54-1:00).
- Pilih Mod Pembersihan: Press the mode selection button (⑁) to cycle through available cleaning modes:
- Mod Automatik: For general cleaning tasks.
- Mod Intensif: For stubborn stains and heavy dirt.
- Bathroom Mode: Designed for rapid water absorption and drying on bathroom surfaces.
Video 6: Mode Selection. This video demonstrates how to select different cleaning modes, including the specialized Bathroom Mode, using the mode button (1:10-1:14).
- Operasi Pembersihan: Guide the vacuum cleaner across the floor. The 180° lie-flat design allows access under furniture. The triple-edge design helps clean corners and edges effectively.
Figure 2: 180° Lie-Flat Cleaning. This image shows the JONR H2 Pro operating in a fully reclined position, demonstrating its ability to clean under low-clearance furniture.
Figure 3: Triple-Edge Cleaning. This image highlights the vacuum's design for cleaning close to edges and into corners, ensuring thorough coverage.
Penyelenggaraan dan Penjagaan
- Kitaran Pembersihan Diri: After use, return the H2 Pro to the charging station. Press the self-cleaning button (⑁) to initiate the hot water self-cleaning and air-drying cycle.
Video 7: Initiating Self-Cleaning. This video shows placing the vacuum on its charging station and pressing the self-cleaning button to start the cycle (1:17-1:24).
Figure 4: Deep Self-Cleaning. This image illustrates the hot water self-cleaning and hot air drying process for the roller brush, ensuring hygiene and preventing odors.
- Kosongkan dan Bersihkan Tangki Air Kotor: After the self-cleaning cycle, remove the dirty water tank. Open it from both sides and empty the contents. Rinse the tank with clean water and use the provided maintenance brush to clean the liquid level sensor and any residue.
Video 8: Cleaning the Dirty Water Tank. This video demonstrates how to remove, empty, and clean the dirty water tank, including using the maintenance brush for the sensor (1:24-1:40).
- Clean Roller Brush and Filter Sponge: Remove the roller brush and rinse it with clean water. Remove the filter sponge and clean it under running water. Allow all cleaned components to air dry completely before reassembling.
Video 9: Roller Brush and Filter Cleaning. This video shows how to remove and rinse the roller brush and filter sponge, emphasizing air drying before reassembly (1:40-2:18).
- Pemasangan semula: Once all parts are dry, reinsert the filter sponge, install the roller brush, and then reattach the dirty water tank.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Vakum tidak dihidupkan | Battery drained; Power button not pressed correctly. | Charge the vacuum; Ensure the power button is pressed firmly. |
| Penyedutan yang teruk | Dirty water tank full; Roller brush tangled; Filter clogged. | Empty dirty water tank; Clean roller brush; Clean or replace filter. |
| Kebocoran air | Dirty water tank not properly installed/locked; Clean water tank lid not sealed. | Ensure dirty water tank is securely installed and locked; Check clean water tank lid for proper seal. |
| Bau yang tidak menyenangkan | Dirty water tank not cleaned; Roller brush not cleaned. | Empty and thoroughly clean dirty water tank; Clean roller brush and allow to air dry. |
| Self-cleaning not starting | Vacuum not correctly placed on charging station; Clean water tank empty. | Ensure vacuum is properly docked; Fill clean water tank. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | JONR |
| Model | H2 Pro |
| Dimensi Produk | 28L x 23W x 111H Sentimeter |
| Berat Barang | 7.89 Paun (lebih kurang 3.58 kg) |
| Kapasiti Tangki Air Bersih | 1500ml |
| Kapasiti Tangki Air Kotor | 600ml (bottom-mounted) |
| Kuasa Sedutan | 20,000Pa |
| Scrubbing Speed | 500BPM |
| Masa jalan | Sehingga 45 minit |
| Self-Cleaning Temperature | 70°C Hot Water |
| Syor Permukaan | Hard Floor, Hardwood, Tile |
Waranti dan Sokongan
For warranty information, technical support, or service inquiries, please refer to the official JONR website or contact JONR customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Manufacturer Contact Information: Suzhoujingwakeji co.Itd, Unit A0403, Building 4, Suzhou International Science & Technology Park, No. 1355 Jinji Lake Avenue, Suzhou Industrial Park, Suzhou, Jiangsu 215000, China.