AOPUTTRIVER AP-5000N

AOPUTTRIVER AP-5000N Pinless Moisture Meter User Manual

Model: AP-5000N

1. Pengenalan

Thank you for choosing the AOPUTTRIVER AP-5000N Pinless Moisture Meter. This device is designed for non-destructive measurement of moisture content in various materials such as lumber, drywall, firewood, and masonry. Its advanced sensing technology provides accurate readings without damaging the surface of the material. This manual provides detailed instructions for proper setup, operation, and maintenance to ensure optimal performance and longevity of your device.

AOPUTTRIVER AP-5000N Pinless Moisture Meter being used on various materials like walls, wood floor, wood, and building material.

Image 1.1: The AP-5000N moisture meter is versatile, suitable for measuring moisture in walls, wood floors, raw wood, and other building materials.

2. Maklumat Keselamatan

  • Baca semua arahan dengan teliti sebelum menggunakan peranti.
  • Do not attempt to disassemble or modify the meter. This may cause damage and void the warranty.
  • Jauhkan peranti daripada air dan persekitaran yang lembap untuk mengelakkan kerosakan.
  • Store the meter in a dry, cool place when not in use.
  • Buang bateri mengikut peraturan tempatan.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

  • AP-5000N Pinless Moisture Meter
  • Manual Arahan Operasi
  • Kabel Data Jenis-C
  • Small Screwdriver (for battery compartment, if applicable)
  • Beg Penyimpanan
AOPUTTRIVER AP-5000N Pinless Moisture Meter with included accessories: a black storage pouch, a Type-C data cable, and a small screwdriver.

Image 3.1: Contents of the AP-5000N package, including the meter, storage pouch, Type-C cable, and screwdriver.

4. Produk Lebihview

Familiarize yourself with the components and controls of your AP-5000N moisture meter:

Diagram of the AOPUTTRIVER AP-5000N Pinless Moisture Meter with labeled parts and controls.

Imej 4.1: Depan view of the AP-5000N meter with key features labeled.

  1. Lampu Penunjuk LED: Displays Dry, Mid, or Wet status.
  2. Dry Indicator: Green light for low moisture.
  3. Flashlight Indicator: Indicates flashlight is active.
  4. Mod Dinding: Setting for wall materials.
  5. Softwood Mode: Setting for softwood materials.
  6. Measurement Reading Display: Digital percentage bacaan.
  7. Butang Hidup / Mati: Untuk menghidupkan atau mematikan peranti.
  8. Reading Hold Button: Membekukan bacaan semasa pada paparan.
  9. MID Indicator: Yellow light for medium moisture.
  10. Wet Indicator: Red light for high moisture.
  11. Masonry Mode: Setting for masonry materials.
  12. Mod Kayu Keras: Setting for hardwood materials.
  13. Measurement Reading Analog Display: Bar graph for visual moisture level.
  14. Butang Pilih Mod: Cycles through material modes.
  15. Butang Hidup/Mati Lampu Suluh: Mengaktifkan lampu suluh terbina dalam.

5. Persediaan

5.1. Pemasangan Bateri

The AP-5000N typically uses AAA batteries (not always included). Locate the battery compartment on the back of the device. Use the provided small screwdriver to open the compartment, insert the batteries according to the polarity indicators, and then securely close the compartment.

5.2. Kuasa Awal Hidup

Tekan ke Butang Hidup/Mati Kuasa to turn on the device. The LCD display will illuminate, and the meter will perform a brief self-test before entering measurement mode.

6. Arahan Operasi

6.1. Hidupkan/Mati Kuasa

  • Untuk menghidupkan: Tekan butang Butang Hidup/Mati Kuasa.
  • Untuk mematikan: Tekan dan tahan butang Butang Hidup/Mati Kuasa for a few seconds, or the device will automatically power off after a period of inactivity to conserve battery life.

6.2. Pemilihan Mod

The meter offers different modes for various materials to ensure accurate readings. To select a mode:

  1. Tekan ke Butang Pilih Mod berulang kali.
  2. The LCD display will show the name of the currently selected material (e.g., WALL, MASONRY, SOFTWOOD, HARDWOOD).
  3. Choose the mode that best matches the material you are testing.

6.3. Mengambil Ukuran

The AP-5000N uses non-destructive sensing technology, allowing measurements up to 20mm (0.75 inches) deep without damaging the surface.

  1. Ensure the correct material mode is selected.
  2. Gently press the sensing area on the back of the hygrometer flat against the surface of the material you wish to measure.
  3. The moisture reading will be displayed on the LCD screen.
AOPUTTRIVER AP-5000N Pinless Moisture Meter demonstrating deep measurement capability up to 19mm (0.75in) on a brick wall.

Image 6.1: The meter can detect moisture up to 19mm (0.75 inches) deep into materials.

6.4. Memahami Bacaan

The meter provides moisture readings through a digital LCD display, a tri-color LED bar graph, and an audible alarm.

  • Paparan LCD: Shows the exact moisture percentage.
  • Tri-color LED Bar Graph:
    • Green (DRY): Indicates low moisture levels.
    • Yellow (MID): Indicates medium moisture levels.
    • Red (WET): Indicates high moisture levels.
  • Penggera yang boleh didengar: The meter will beep and the LED bar will turn red when the humidity exceeds the system's preset wet threshold for the selected material.
  • Fungsi Tahan: Tekan ke Reading Hold Button to freeze the current reading on the display for easier recording. Press it again to release the hold.
AOPUTTRIVER AP-5000N Pinless Moisture Meter display showing moisture levels and corresponding dry, mid, and wet ranges for walls, masonry, hardwood, and softwood.

Image 6.2: The display shows digital readings and a color-coded bar graph for quick moisture assessment. Reference the table on the meter for specific ranges.

6.5. Fungsi Lampu Suluh

The meter includes a built-in flashlight for use in dimly lit areas.

  • Untuk menghidupkan lampu suluh: Tekan Butang Hidup/Mati Lampu Suluh.
  • Untuk mematikan lampu suluh: Tekan Butang Hidup/Mati Lampu Suluh sekali lagi.
Close-up of the AOPUTTRIVER AP-5000N Pinless Moisture Meter's flashlight illuminating a dark area.

Image 6.3: The integrated flashlight assists in reading the display and inspecting surfaces in low-light conditions.

7. Penyelenggaraan

  • Pembersihan: Lap peranti dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut yang melelas.
  • Storan: When not in use for extended periods, remove the batteries to prevent leakage. Store the meter in its protective pouch in a cool, dry place, away from direct sunlight and extreme temperatures.

8. Penyelesaian masalah

  • Peranti tidak dihidupkan: Periksa pemasangan bateri dan pastikan bateri tidak habis. Gantikan jika perlu.
  • Bacaan tidak tepat: Ensure the correct material mode is selected. Make sure the sensing area is flat against the surface and free from dirt or obstructions.
  • Paparan malap atau berkelip: Bateri mungkin lemah. Gantikannya.
  • No reading: Ensure the device is properly pressed against the material. The material might be too thin or outside the measurement range.

9. Spesifikasi

  • model: AP-5000N
  • Prinsip Pengukuran: Pinless, Non-Destructive Electromagnetic Sensing
  • Kedalaman Pengesanan: Sehingga 20mm (0.75 inci)
  • paparan: Large Backlit LCD with Tri-color LED Bar Graph
  • Mod Pengukuran: Wall, Masonry, Hardwood, Softwood
  • ciri-ciri: Audible Alarm, Low Battery Alarm, Auto Power Off, Hold Function, Flashlight
  • Sumber Kuasa: (Typically AAA batteries, user to confirm from device)
  • Jenama: AOPUTTRIVER

10. Waranti dan Sokongan

For any questions regarding your AOPUTTRIVER AP-5000N Pinless Moisture Meter, please refer to the contact information provided with your purchase or visit the official AOPUTTRIVER weblaman web untuk sokongan. Sila simpan bukti pembelian anda untuk tuntutan jaminan.

© 2023 AOPUTTRIVER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.