ANDELI MIG-135PLUS 4-in-1 Multi-Process Welder Instruction Manual

1. Pengenalan

Thank you for choosing the ANDELI MIG-135PLUS 4-in-1 Multi-Process Welder. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your welding machine. Please read it thoroughly before use and keep it for future reference.

1.1 Langkah Keselamatan

Welding can be dangerous. Always follow safety guidelines to prevent injury or damage. This machine is designed for use by trained individuals or under supervision.

• Always wear appropriate personal protective equipment (PPE), including a welding helmet with suitable shade, welding gloves, protective clothing, and safety shoes.
• Ensure adequate ventilation in the work area to disperse welding fumes.
• Protect bystanders from arc rays and sparks. Use welding screens if necessary.
• Do not weld near flammable materials or in explosive atmospheres.
• Pastikan mesin kimpalan dibumikan dengan betul.
• Jangan sekali-kali menyentuh bahagian elektrik hidup.
• Putuskan sambungan kuasa sebelum melakukan sebarang penyelenggaraan atau menukar aksesori.

1.2 Kandungan Pakej

Sahkan bahawa semua item ada semasa membongkar:

• ANDELI MIG-135PLUS Welder Unit
• Flux-cored wire spool (gasless)
• Obor Kimpalan MIG
• Electrode Holder (for MMA welding)
• Tanah Clamp
• Auto-darkening Welding Helmet (convertible to goggles)
• Professional Leather Welding Gloves

Figure 1: ANDELI MIG-135PLUS Welder and included accessories.

2. Persediaan

2.1 Sambungan Kuasa

• The MIG-135PLUS operates on a 220V/230V power supply. Ensure your power source matches this requirement.
• Connect the power cord securely to a grounded electrical outlet.

2.2 Wire Installation (Flux-Cored MIG)

• Buka petak suapan wayar.
• Place the flux-cored wire spool onto the spindle, ensuring it rotates freely.
• Thread the wire through the guide tube and into the drive rollers.
• Close the drive roller tension arm and adjust the tension. The wire should feed smoothly without slipping or deforming.
• Masukkan wayar melalui pelapik obor MIG sehingga ia keluar dari hujung sentuhan.
• The welder supports 0.030'' (0.8mm) and 0.035'' (0.9mm) flux-cored wires.

2.3 Sambungan Aksesori

• Obor MIG: Connect the MIG torch cable to the corresponding port on the front panel.
• Tanah Clamp: Sambungkan tanah clamp cable to the negative (-) terminal. Attach the clamp securely to the workpiece, ensuring good electrical contact.
• Pemegang Elektrod (untuk MMA): Connect the electrode holder cable to the positive (+) terminal for MMA welding.
• Lift TIG Torch (Optional): If using a Lift TIG torch (not included), connect it to the appropriate port as per its instructions.

Figure 2: Front panel connections of the MIG-135PLUS welder.

3. Mod Operasi

3.1 4-in-1 Welding Functions

The MIG-135PLUS offers four versatile welding processes:

• Gasless Flux-Cored MIG: Ideal for outdoor use and welding mild steel without the need for shielding gas. Includes a pulsed function for smoother, more stable arcs and finer weld beads.
• Standard Gasless MIG: Basic flux-cored MIG welding.
• Angkat TIG: For precise welding of various metals (requires a separate Lift TIG torch, not included).
• MMA (Kimpalan Kayu): For welding with coated electrodes, suitable for thicker materials. Features adjustable Hot Start and Arc Force.

Gambar 3: Lebihview of the 4-in-1 welding functions.

3.2 Panel Kawalan dan Paparan

The welder features a precise 4.1-inch LED digital display that provides real-time welding data such as voltage, current, and wire feed speed. This display is protected by a transparent cover for durability against impacts and splashes.

3.3 Welding Mode Selection (SYNERGIC vs. Manual)

• SYNERGIC Mode (Automatic): Recommended for beginners. The system automatically adjusts voltage based on the wire feed speed, simplifying parameter setup.
• Mod Manual: Recommended for experienced users. Allows separate and precise control over welding current and voltage for fine-tuning.

Figure 4: Automatic vs. Manual operating modes.

3.4 2T/4T Trigger Modes

• 2T Mode (Two-Touch): Press and hold the torch trigger to start wire feeding and welding. Release the trigger to stop. Suitable for short welds.
• 4T Mode (Four-Touch): Press the trigger once to start wire feeding and welding. Press it again to stop. Ideal for longer welds, reducing hand fatigue.

Figure 5: 2T and 4T trigger mode settings.

3.5 Pulsed MIG Welding (Gasless)

The gasless MIG function includes a pulsed mode, which provides a smoother and more stable arc. This results in finer, more uniform weld beads and stronger joints, enhancing the quality and versatility of gasless welding.

Figure 6: Comparison of welding quality with and without pulsed MIG function.

4. Penyelenggaraan

Penyelenggaraan tetap memastikan jangka hayat dan prestasi optimum mesin kimpalan anda.

• Pembersihan: Periodically clean the machine's exterior with a dry cloth. Use compressed air to clear dust from ventilation openings.
• Obor dan Kabel: Inspect the MIG torch, electrode holder, and ground clamp cables for any signs of damage, cuts, or loose connections. Replace damaged components immediately.
• Mekanisme Suapan Kawat: Keep the wire feed rollers clean and free of debris. Ensure the wire liner is not clogged.
• Storan: Store the welder in a dry, clean environment, away from excessive dust and moisture.

5. Penyelesaian masalah

The MIG-135PLUS features an advanced protection system against overcurrent, overload, overheating, and overvoltage. If an issue occurs, the machine may automatically shut down or display an error code. Consult the table below for common issues.

Jika masalah berterusan selepas mencuba penyelesaian ini, sila hubungi sokongan pelanggan.

6. Spesifikasi Teknikal

7. Waranti dan Sokongan

Untuk maklumat waranti, sokongan teknikal atau pertanyaan perkhidmatan, sila rujuk dokumentasi yang diberikan bersama pembelian anda atau hubungi terus penjual/pengilang. Simpan bukti pembelian anda untuk tuntutan waranti.