pengenalan
Thank you for choosing the Satco S12535 ST19 LED Light Bulb. This manual provides essential information for the safe and efficient use of your new LED bulb. Please read these instructions carefully before installation and retain them for future reference.
Image: The Satco S12535 ST19 LED Light Bulb, clear glass with visible filaments.
Maklumat Keselamatan Penting
- Risiko Renjatan Elektrik: Always disconnect power before installing or replacing the bulb.
- Penggunaan Dalaman/Luar: This bulb is rated for wet locations (IP65) and suitable for enclosed fixtures. It can be used indoors or in covered outdoor environments.
- Voltage: Pastikan perlawanan voltage is 120V. Do not use with incompatible voltage.
- Peredupan: This bulb is dimmable. Use only with compatible 120V dimmers. Incompatible dimmers may cause flickering or damage.
- Suhu: Do not operate outside the specified temperature range of -20°C to +45°C.
- Pengendalian: Allow the bulb to cool before handling. Avoid touching the bulb with bare hands immediately after use.
- Pelupusan: Dispose of LED bulbs according to local regulations.
Persediaan dan Pemasangan
- Matikan: Before installation, ensure the power supply to the fixture is turned off at the circuit breaker or fuse box.
- Keluarkan Mentol Lama: Tanggalkan mentol sedia ada dari lekapan dengan berhati-hati.
- Masukkan Mentol Baharu: Screw the Satco S12535 LED bulb into the E26 medium base socket. Ensure it is securely tightened but do not overtighten.
- Hidupkan kuasa: Pulihkan kuasa pada lekapan.
- Dimmer Compatibility (if applicable): If using a dimmer, ensure it is compatible with LED bulbs and rated for 120V.
Image: Close-up of the E26 medium base of the Satco LED bulb, indicating its standard screw-in design.
Operasi
The Satco S12535 LED bulb is designed for immediate illumination upon power activation. It provides 425 lumens of 5000K natural white light, suitable for various applications.
- Kawalan Kecerahan: When connected to a compatible 120V dimmer, the brightness can be adjusted from full intensity to a lower, softer glow.
- Kualiti Cahaya: The bulb features a high Color Rendering Index (CRI) of 92, ensuring accurate and natural color representation of objects in its light.
- Penyebaran Rasuk: A 300-degree beam spread provides wide and even illumination, minimizing shadows.
Image: The Satco ST19 LED bulb installed in a fixture, providing illumination to a modern living room and kitchen area.
Penyelenggaraan
The Satco S12535 LED bulb requires minimal maintenance due to its long rated life of 15,000 hours.
- Pembersihan: Untuk membersihkan mentol, pastikan kuasa dimatikan dan mentol sejuk. Lap perlahan-lahan menggunakan kain lembut dan kering. Jangan gunakan pembersih cecair atau bahan kasar.
- Penggantian: Replace the bulb when it reaches the end of its operational life. Follow the installation steps in reverse to remove the old bulb.
Menyelesaikan masalah
If you encounter issues with your Satco S12535 LED bulb, refer to the following common troubleshooting steps:
- Mentol Tidak Menyala:
- Pastikan bekalan kuasa ke lekapan dihidupkan.
- Periksa sama ada mentol diskrukan dengan kukuh.
- Uji mentol pada lekapan lain yang berfungsi untuk mengesahkan ia tidak rosak.
- Verify the fixture itself is operational.
- Cahaya Berkelip-kelip atau Tidak Sekata:
- If using a dimmer, ensure it is compatible with LED bulbs. Older incandescent-only dimmers may cause flickering.
- Check for loose connections in the fixture or bulb socket.
- Pastikan voltage supply is stable at 120V.
- Bulb is Too Dim or Too Bright:
- If using a dimmer, adjust the dimmer setting.
- Confirm the bulb's specifications (425 lumens, 5000K) match your lighting requirements.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | S12535 |
| Wattage | 5 Watt (Setara Pijar 40W) |
| Kecerahan | 425 Lumen |
| Suhu Warna | 5000K (Putih Asli) |
| Bentuk Mentol | ST19 |
| Jenis Asas | E26 Asas Sederhana |
| Indeks Paparan Warna (CRI) | 92 |
| Sudut Rasuk | 300 Darjah |
| Voltage | 120V |
| Boleh dimalapkan | Yes (with compatible 120V dimmers) |
| Rated Life | 15,000 Jam |
| Penilaian Alam Sekitar | Wet Location Rated (IP65), Enclosed Fixture Rated |
| Suhu Operasi | -20°C hingga +45°C |
| Pensijilan | cULus, FCC, RoHS |
| Faktor Kuasa | 0.7 |
| Kekerapan | 60Hz |
| Berat Barang (6 pek) | 1.06 paun |
Image: Lighting Facts label detailing brightness, estimated yearly energy cost, life, light appearance (5000K), and energy used (5 watts).
Waranti dan Sokongan
The Satco S12535 ST19 LED Light Bulb is backed by a Waranti pengilang selama 2 tahun dari tarikh pembelian.
For warranty claims, technical assistance, or product support, please contact Satco customer service directly. Refer to the product packaging or the official Satco webtapak untuk maklumat hubungan semasa.
Webtapak: www.satco.com