pengenalan
Thank you for choosing the STUDIOFINIX 8 Inch Bluetooth Ceiling Speaker System. This system is designed to provide high-quality audio with a discreet, flush-mount installation. This manual will guide you through the installation, operation, and maintenance of your new speaker system to ensure optimal performance and longevity. Please read these instructions carefully before installation and use.
Apa yang ada dalam Kotak
Before beginning installation, please verify that all components are present:
- 2 x 8" Passive Ceiling Speakers
- 2 x Kabel Pembesar Suara
- 1 x 2-Channel Wall Amplebih hidup
- 1 x Penyesuai Kuasa (12V3A)
- 1 x Manual Pengguna (dokumen ini)
- Memasang Perkakasan (skru, dsb.)
- Templat Pemasangan
Persediaan dan Pemasangan
Careful planning is essential for a successful installation. This system requires routing speaker wires from the ceiling to the wall amplifier and connecting the amplifier to a power source. Professional installation is recommended if you are not comfortable with low-voltage wiring and drywall work.
1. Planning and Location Selection
Choose appropriate locations for your ceiling speakers and the wall amplifier. Ensure there are no obstructions like electrical wires, plumbing, or structural beams in the chosen areas. The wall amplifier should be installed in a standard single-gang electrical box and near a power outlet.
2. Pemasangan Speaker
- Using the provided template, mark the cut-out diameter (approximately 8.07 inches / 20.5 cm) on the ceiling at your desired speaker locations.
- Carefully cut the holes in the ceiling.
- Run speaker wires from the cut-out holes to the location of the wall amplifier. Ensure proper polarity (+ and -) is maintained.
- Connect the speaker wires to the spring-loaded terminals on the back of each speaker. Press the depressible terminal, insert the stripped wire, and release.
- Insert the speaker into the ceiling hole. The integrated clamping anchors will secure the speaker in place.
3. Dinding AmpPemasangan lebih hidup
- Install a standard single-gang electrical box at the chosen wall location.
- Route the speaker wires from the ceiling to this electrical box.
- Connect the speaker wires to the terminal block on the back of the 2-channel wall amplifier. Ensure correct polarity: Speaker Output L+ (Left Positive), Speaker Output L- (Left Negative), Speaker Output R+ (Right Positive), Speaker Output R- (Right Negative).
- Connect the 12V DC power supply wires to the amplifier's power input terminals (12V DC IN BLACK- and 12V DC IN RED+).
- Secure the wall amplifier module into the electrical box using screws. Attach the faceplate.
- Plug the power adapter into a wall outlet and connect it to the amplifier's DC 12V input.
Arahan Operasi
dinding AmpKawalan yang lebih hidup
- LED kuasa: Menunjukkan status kuasa.
- Bluetooth Signal LED: Menunjukkan status sambungan Bluetooth.
- Pemilihan Input: Press to cycle between Bluetooth (BT), AUX, and Microphone (MIC) inputs.
- Jumlah Induk: Rotate to adjust volume. Press to power ON/OFF or Play/Pause (in Bluetooth/USB mode).
- Port USB: For USB flash memory playback and 5V/1A device charging.
- MIC DALAM: 1/4" input jack for a microphone.
- AUX In: 3.5mm audio input jack for external devices.
Berpasangan Bluetooth
- Memastikan amppenyambung dihidupkan.
- Press the Input Selection button until the Bluetooth Signal LED starts blinking, indicating pairing mode.
- Pada peranti mudah alih anda (telefon pintar, tablet, dll.), dayakan Bluetooth dan cari peranti yang tersedia.
- Select "HCS828" (or similar model name) from the list to pair.
- Once connected, the Bluetooth Signal LED will become solid. You can now stream audio wirelessly.
Input AUX
Connect an external audio device (e.g., MP3 player, TV) to the 3.5mm AUX In jack on the wall amplifier using a 3.5mm audio cable. Select AUX input using the Input Selection button.
Main Balik USB
Masukkan pemacu kilat USB yang mengandungi audio files into the USB Port. The amplifier will automatically detect and play compatible audio files. The USB port also provides 5V/1A charging for devices.
Penggunaan Mikrofon
Connect a 1/4" microphone to the MIC IN jack. Select MIC input using the Input Selection button. Adjust the master volume as needed.
Penyelenggaraan
- Pembersihan: Use a soft, dry cloth to clean the speaker grilles and the wall amplifier faceplate. Do not use harsh chemicals or abrasive cleaners.
- Penyingkiran gril: The speaker grilles are magnetic and can be carefully removed for cleaning or painting.
- Keadaan Persekitaran: Avoid exposing the system to excessive moisture, extreme temperatures, or direct sunlight.
- Pemeriksaan Pendawaian: Periksa semua sambungan pendawaian secara berkala untuk memastikan ia selamat dan bebas daripada kerosakan.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada suara dari pembesar suara | Power not connected; incorrect input selected; loose speaker wires; volume too low. | Check power adapter connection; ensure Power LED is on. Select correct input (BT/AUX/MIC). Verify speaker wire connections at both the amplifier and speakers. Increase volume. |
| Bluetooth tidak berpasangan | AmpLampu tidak dalam mod berpasangan; peranti terlalu jauh; gangguan; peranti yang dipilih salah. | Ensure Bluetooth input is selected and LED is blinking. Move device closer to amplifier. Turn off other Bluetooth devices. Select "HCS828" from your device's Bluetooth list. |
| Audio yang diputarbelitkan | Volume too high; poor source audio quality; loose connections. | Reduce volume. Test with a different audio source. Check all wiring connections. |
| Main balik USB tidak berfungsi | Tidak disokong file format; USB drive not properly inserted; corrupted files. | Pastikan audio files are in a supported format. Reinsert USB drive. Try a different USB drive or files. |
Spesifikasi
Pembesar Suara Siling
- Saiz pembesar suara: 8 Inci
- Diameter Woofer: 8 Inci
- Tweeter: Kubah Sutera 1 Inci
- Kuasa Dinilai: 50W
- Output Kuasa Maksimum: 200W (EACH)
- Sensitiviti: 89dB
- Impedans: 8 Ohm
- Respons Kekerapan: 50-20KHz
- Diameter Potongan: 8.07 Inch (20.5 CM)
- Kedalaman Pemasangan: 3.54 Inches (9 CM)
- Bahan: ABS
dinding Amplebih hidup
- Output Kuasa: 100 Watt Peak, 40 Watt RMS x 2 Ch. @ 4 Ohm
- Versi Bluetooth: 5.0
- Julat Tanpa Wayar: 30 Kaki (10 Meter)
- Jenis Input Mikrofon: Dinamik
- kuasa Amp Jenis: Stereo Kelas-D
- Rintangan Beban Minimum: 4 Ohm
- THD: 0.03% (8 Ohm, 1KHz)
- Cabutan Kuasa: 12V 3Amps
- Kuasa: DC 100-240V, 50/60Hz (12V DC Adapter)
- Ketersambungan: Bluetooth, AUX (3.5mm), USB, MIC (1/4")
Maklumat Waranti
STUDIOFINIX products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included in your package or visit the official STUDIOFINIX weblaman web untuk terma dan syarat jaminan terperinci. Simpan resit pembelian anda sebagai bukti pembelian.
Sokongan
If you encounter any issues or have questions regarding your STUDIOFINIX 8 Inch Bluetooth Ceiling Speaker System, please contact our customer support team. You can find contact information on the STUDIOFINIX official website or through your retailer. Please have your model number (ST-HCS828-16BT2CH-US) and purchase details ready when contacting support.
Untuk sumber tambahan dan Soalan Lazim, lawati Kedai STUDIOFINIX di Amazon.