ANDELI 135Amp MIG Welder Instruction Manual

1. Maklumat Keselamatan

Sentiasa mengutamakan keselamatan semasa mengendalikan peralatan kimpalan. Kegagalan mematuhi garis panduan keselamatan boleh mengakibatkan kecederaan serius atau kematian.

• Pakai peralatan perlindungan diri (PPE) yang sesuai: This includes a welding helmet with proper shade, welding gloves, flame-resistant clothing, and safety shoes.
• Pastikan pengudaraan yang betul: Welding fumes can be hazardous. Work in a well-ventilated area or use a fume extractor.
• Protect against electric shock: Ensure the welder is properly grounded. Do not operate in wet conditions. Inspect cables for damage before each use.
• Prevent fire and explosions: Jauhkan bahan mudah terbakar dari kawasan kimpalan. Sediakan alat pemadam api.
• Protect eyes and skin from arc rays: Welding arcs emit intense UV and IR radiation that can cause severe burns to eyes and skin.
• Read and understand the entire manual: Before operating the welder, familiarize yourself with all instructions and warnings.

2. Produk Lebihview

The ANDELI 135Amp MIG Welder is a versatile 4-in-1 machine designed for various welding tasks. It features a robust design with advanced controls for precision and safety.

Image: The ANDELI 135Amp MIG Welder shown with its included accessories, including the MIG torch, ground clamp, and a spool of flux-cored wire.

Ciri-ciri Utama:

• 4-in-1 Welding Capabilities: Supports MAN Gasless MIG, SYN Gasless MIG, Lift TIG, and MMA Welding. (Lift TIG torch sold separately).
• High-Power 135A Output: Capable of welding mild steel plates up to 2/5 inches thick.
• Dwi-Jilidtage serba boleh: Operates on both 110V and 220V power sources for adaptability to different environments and tasks.
• Smart Synergic Control: Automatically optimizes voltage and wire feed speed when amperage or wire diameter is adjusted.
• 4.1-Inch Precision LED Display: Provides clear, real-time welding data, protected by a transparent cover.
• Advanced Protection System: Includes automatic voltage compensation, over-current, overload, overheating, and over-voltage perlindungan.

Image: A close-up of the ANDELI 135Amp MIG Welder's control panel, highlighting the four welding modes: SYN MIG, MAN MIG, MMA, and Lift TIG.

3. Persediaan

3.1 Membongkar dan Pemeriksaan

• Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
• Inspect the welder and accessories for any signs of damage during shipping. Contact your supplier immediately if any damage is found.
• Pastikan semua komponen yang disenaraikan ada.

3.2 Sambungan Kuasa

This welder supports dual voltage operation (110V/220V).

• Sambungkan kord kuasa ke soket elektrik yang dibumikan yang sesuai.
• For 110V operation, use a standard 110V outlet.
• For 220V operation, ensure the appropriate adapter or dedicated 220V outlet is used. The machine automatically detects the input voltage.
• Always ensure the power source meets the welder's requirements to prevent damage.

Image: Illustration demonstrating the dual voltage capability of the ANDELI 135Amp MIG Welder, indicating 110V for lighter tasks and 220V for thicker metals.

3.3 Wire Installation (Gasless MIG)

1. Buka petak suapan wayar.
2. Place the flux-cored wire spool onto the spindle, ensuring it rotates freely.
3. Thread the wire through the guide tube and into the drive rollers.
4. Close the drive roller tension arm and adjust the tension. The wire should feed smoothly without slipping or deforming.
5. Feed the wire through the MIG torch liner until it exits the nozzle. Trim any excess wire.

3.4 Menyambungkan Kabel Kimpalan

• Connect the MIG torch cable to the positive (+) terminal for flux-cored welding.
• Sambungkan tanah clamp kabel ke terminal negatif (-).
• Pasangkan tanah cl dengan selamatamp ke bahan kerja atau meja kimpalan, memastikan sentuhan elektrik yang baik.

4. Arahan Operasi

4.1 Menghidupkan dan Pemilihan Mod

1. Turn on the main power switch located on the back of the welder.
2. The LED display will illuminate.
3. Use the mode selection knob/button to choose your desired welding process: MAN Gasless MIG, SYN Gasless MIG, Lift TIG, or MMA.

4.2 Synergic Control (SYN Gasless MIG)

In SYN Gasless MIG mode, the welder's smart synergic control simplifies settings:

• Laraskan amperage (current) or select the wire diameter.
• The machine will automatically optimize the corresponding voltage and wire feed speed for the selected setting.
• This feature is ideal for achieving consistent weld quality with minimal manual adjustment.

4.3 Manual Control (MAN Gasless MIG, MMA, Lift TIG)

For MAN Gasless MIG, MMA, and Lift TIG modes, you will manually adjust parameters:

• Amppemadaman: Adjust the current using the dedicated knob.
• Voltage (MIG only): Laraskan voltage as needed for MIG welding.
• Wire Feed Speed (MIG only): Adjust the wire feed speed to match your ampera dan voltage tetapan.

4.4 2T/4T Settings

The welder offers 2T (Two-Touch) and 4T (Four-Touch) trigger modes:

Image: The welder's display indicating the 2T and 4T trigger settings, with descriptions for each mode.

• 2T (Dua Sentuhan): Press and hold the torch trigger to start welding; release to stop. This is suitable for short welds and tacking.
• 4T (Empat Sentuhan): Press and release the trigger to start welding; press and release again to stop. This mode is beneficial for long welds, reducing hand fatigue.

4.5 Sarung Tangan Kimpalan

The included welding gloves are designed for protection and comfort during welding operations.

Image: A pair of ANDELI welding gloves, showing their design and extended cuffs for wrist protection.

• Ensure gloves are worn at all times during welding to protect hands from heat, sparks, and UV radiation.
• The reinforced areas on the palm, thumb, and fingers provide enhanced durability and comfort.
• The stitching technology is designed for fire and temperature resistance.

5. Penyelenggaraan

Penyelenggaraan tetap memastikan jangka hayat dan prestasi optimum mesin kimpalan anda.

• Bersihkan mesin: Periodically clean the exterior of the welder with a dry cloth. Use compressed air to clear dust from internal components, ensuring the power is disconnected first.
• Inspect cables and connections: Regularly check all welding cables, power cords, and connections for cuts, fraying, or loose fittings. Replace damaged components immediately.
• Check wire feed system: Ensure the drive rollers are clean and free of debris. Verify proper wire tension and inspect the torch liner for blockages or wear.
• Torch nozzle and contact tip: Clean or replace the nozzle and contact tip as they wear out to maintain good arc stability and wire feeding.
• Storan: Simpan mesin kimpal di persekitaran yang bersih dan kering apabila tidak digunakan.

6. Penyelesaian masalah

Bahagian ini menangani isu biasa yang mungkin anda hadapi. Untuk masalah yang tidak disenaraikan di sini, hubungi sokongan pelanggan.

7. Spesifikasi

Technical specifications for the ANDELI 135Amp MIG Welder.

• model: 135Amp MIG Welder
• Input Voltage: 110V/220V (Dua Voltage)
• Arus Keluaran: Sehingga 135A
• Proses Kimpalan: MAN Gasless MIG, SYN Gasless MIG, Lift TIG, MMA
• Max Plate Thickness (Mild Steel): Up to 2/5 inches
• paparan: LED 4.1 inci
• Ciri-ciri perlindungan: Vol. Automatiktage compensation, over-current, overload, overheating, over-voltage perlindungan.
• ASIN: B0FSDC2WR2
• Tarikh Mula-mula Tersedia: 3 Jun 2025

8. Waranti dan Sokongan

For detailed warranty information and customer support, please refer to the warranty card included with your product or visit the official ANDELI webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.

ANDELI Official Store US: Visit Seller Page