pengenalan
Thank you for choosing the Turtle Beach Afterglow Wireless RGB Gaming Controller. This controller is officially licensed for Nintendo Switch, Nintendo Switch Lite, Nintendo Switch OLED, and Nintendo Switch 2, providing an enhanced gaming experience with its advanced features and customizable lighting. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.
Video: Berakhirview of Turtle Beach Nintendo Switch 2 Controllers, Headsets, and Cases. This video provides a general look at the product line, including the Afterglow Wireless RGB Gaming Controller.
Ciri-ciri Produk
- Officially Licensed by Nintendo: Ensures full compatibility and quality for Nintendo Switch, Switch Lite, OLED, and Switch 2 consoles.
- Pencahayaan RGB boleh laras: Features a translucent design with customizable brightness and colors, offering 4 preset lighting modes.
- TMR Thumbsticks: Engineered for smooth, accurate gameplay and enhanced durability, reducing drift.
- C Button for Gamechat: Dedicated button for seamless in-game communication.
- Kesambungan Tanpa Wayar: Up to 30-foot low latency wireless connection for freedom of movement.
- Bateri boleh dicas semula: Provides up to 40 hours of play time per charge.
- Built-In Motion Controls: Enhances control and responsiveness for immersive gaming.
- Dual Mappable Quick-Action Back Buttons: Customize functions for faster reactions.
- Textured Thumbsticks and Grips: Designed for comfort and improved control during extended gaming sessions.
Persediaan
Pengecasan Awal
Before first use, fully charge your controller. Connect the included USB-C cable to the controller's charging port and the other end to a USB power source (e.g., Nintendo Switch dock, computer, or USB wall adapter). The RGB lighting will indicate charging status and turn off or change color when fully charged.
Imej: The Turtle Beach Afterglow Wireless RGB Gaming Controller connected to a USB-C charging cable, illustrating the charging process with green internal lighting.
Berpasangan dengan Nintendo Switch
- Pastikan konsol Nintendo Switch anda dihidupkan dan dikemas kini kepada perisian sistem terkini.
- Dari Menu HOME, pilih Pengawal, kemudian Tukar Pegangan/Pesanan.
- On the Afterglow Wireless Controller, press and hold the Butang SYNC (located on the top edge of the controller) for a few seconds until the player indicator lights begin to flash.
- Once the controller is paired, the player indicator light(s) will remain solid, and the controller will be ready for use.
- To wake the console with the controller, ensure the console is in sleep mode and press the Home button on the controller.
Arahan Operasi
Kawalan Asas
The controller features standard Nintendo Switch button layouts. Refer to the image below for a visual guide to the buttons and their functions.
Imej: Atas ke bawah view of the Turtle Beach Afterglow Wireless RGB Gaming Controller, highlighting the layout of the face buttons, thumbsticks, and D-pad.
Gamechat Function (C Button)
Yang berdedikasi Butang C allows for quick access to in-game chat features, if supported by the game. Press the C button to activate or deactivate game chat as needed.
Imej: A finger interacting with the 'C' button on the controller, demonstrating its location and use for game chat.
Penyesuaian
Mod Pencahayaan RGB
The Afterglow controller features customizable RGB lighting with four preset modes. To cycle through the lighting modes and adjust brightness:
- Cari Butang Fungsi (often a small button near the Home button or on the back).
- Press the Function Button + Left Stick (L3) to cycle through different lighting colors/modes.
- Press the Function Button + Right Stick (R3) untuk melaraskan tahap kecerahan.
Imej: The controller showcasing its translucent design with vibrant orange RGB lighting, illustrating customizable illumination.
Mappable Quick-Action Back Buttons
The controller includes two mappable quick-action back buttons (P1 and P2) for assigning specific functions, allowing for faster in-game reactions. To map these buttons:
- Tekan dan tahan butang Butang Fungsi (usually located on the back or bottom of the controller) for 3 seconds. The LED indicator will begin to flash.
- Tekan ke Butang Belakang (P1 or P2) you wish to map. The LED will flash rapidly.
- Tekan ke Standard Button (A, B, X, Y, L, R, ZL, ZR, D-pad, etc.) you want to assign to the back button. The LED will flash slowly.
- Tekan ke Butang Fungsi again to save the mapping. The LED will turn off.
- To clear a mapping, repeat steps 1-3, but instead of pressing a standard button, press the same back button again.
Imej: Bahagian belakang view of the controller, highlighting the two mappable quick-action buttons (P1 and P2) and their blue illumination.
Kawalan Pergerakan
The controller features built-in motion controls, allowing for intuitive and immersive gameplay in compatible titles. These controls automatically activate when a game utilizes motion sensing. Ensure your controller is properly calibrated if you experience issues with motion control responsiveness.
Imej: The controller with yellow lighting, visually representing its built-in motion control capabilities with directional arrows.
Penyelenggaraan
Pembersihan
Untuk membersihkan alat kawalan anda, gunakan kain lembut dan kering. Untuk kotoran degil, sedikitampen kain dengan air. Elakkan menggunakan bahan kimia yang keras atau bahan yang melelas, kerana ini boleh merosakkan kemasan pengawal dan komponen dalaman.
Penyimpanan
Simpan alat kawalan di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung dan suhu yang melampau. Jika menyimpan untuk tempoh yang lama, pastikan bateri dicas separa (sekitar 50%) untuk memanjangkan jangka hayatnya.
Menyelesaikan masalah
| Masalah | Penyelesaian yang Mungkin |
|---|---|
| Pengawal tidak dihidupkan. | Ensure the controller is fully charged. Connect it to a power source using the USB-C cable. |
| Controller does not pair with Nintendo Switch. | Verify the console is updated. Repeat the pairing steps: Go to 'Controllers' > 'Change Grip/Order' on the Switch, then press and hold the SYNC button on the controller. Ensure no other wireless interference is present. |
| RGB lighting is stuck on one color or not changing. | Try resetting the controller (if a reset button is available, otherwise power cycle). Ensure you are using the correct button combination (Function Button + Left Stick) to cycle modes. If the issue persists, contact support. |
| Mappable back buttons are not responding. | Re-map the buttons following the instructions in the 'Customization' section. Ensure the mapping process is completed correctly by pressing the Function Button to save. |
| Motion controls are inaccurate or unresponsive. | Calibrate the motion controls through your Nintendo Switch system settings. Ensure the controller has a clear line of sight to the console if docked, and that you are holding it steadily. |
| Hayat bateri pendek. | Ensure the controller is fully charged before use. Reduce RGB lighting brightness or turn it off to conserve battery. Battery performance may degrade over time with usage. |
Spesifikasi
- Nombor Model: TBC-8104-95
- Ketersambungan: Wireless (Low Latency)
- Julat Tanpa Wayar: Sehingga 30 kaki
- Hayat Bateri: Hingga 40 jam setiap caj
- Port Pengecasan: USB-C
- Keserasian: Nintendo Switch, Nintendo Switch Lite, Nintendo Switch OLED, Nintendo Switch 2
- Dimensi: 6.3 x 2.56 x 5.32 inci
- Berat: 12.6 auns
- Ciri Khas: TMR Thumbsticks, Customizable RGB Lighting (4 modes), C Button for Gamechat, Dual Mappable Quick-Action Back Buttons, Built-In Motion Controls, Textured Grips
Waranti dan Sokongan
This product comes with a manufacturer's warranty. For detailed warranty information, technical support, or to register your product, please visit the official Turtle Beach webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan bukti pembelian anda untuk tuntutan waranti.
Sokongan dalam talian: www.turtlebeach.com/support