Maklumat Keselamatan Penting
Please read this entire instruction manual carefully before installing or using your Stelpro Ultra-Quiet Wall Convector Heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or property damage. Keep this manual for future reference.
- Pemanas ini direka untuk hardwired installation only. It is not a plug-in unit.
- Pemanas ini does not include a built-in thermostat. An external electronic wall thermostat (sold separately) is required for operation and temperature control. Mechanical thermostats are not compatible.
- Ensure the electrical supply matches the heater's requirements (240V or 208V).
- Pemasangan mesti dilakukan oleh juruelektrik bertauliah mengikut semua kod elektrik nasional dan tempatan.
- Do not install the heater near flammable materials or in areas where gasoline, paint, or other flammable liquids are stored or used.
- Maintain proper clearances from walls, furniture, and drapes as specified in the installation guide.
Persediaan dan Pemasangan
The Stelpro ASHC1502WCW convector heater is designed for surface-mount wall installation. For safe and proper operation, professional installation is highly recommended.
Melekap
The heater features a concealed mounting bracket and a back entry plate with cable clamps for a clean, secure installation. Ensure the mounting surface is flat and capable of supporting the heater's weight.
Sambungan elektrik
This unit requires a 240V or 208V hardwired electrical connection. It is crucial to connect the heater to a dedicated circuit with appropriate overcurrent protection. Refer to the wiring diagram provided with the product packaging for detailed electrical connection instructions.
Thermostat Requirement
As this heater does not have an integrated thermostat, an external electronic wall thermostat must be installed and wired to control the heater's operation. Ensure the chosen thermostat is compatible with 240V/208V electric heating systems.
Arahan Operasi
Once properly installed and connected to an electronic wall thermostat, operating your Stelpro convector heater is straightforward.
- Hidupkan kuasa: Ensure the circuit breaker supplying power to the heater is in the 'ON' position.
- Tetapkan Termostat: Use your external electronic wall thermostat to set the desired room temperature. The heater will activate when the room temperature falls below the set point and deactivate once the set point is reached.
- Operasi senyap: This convector heater operates silently, providing consistent warmth without fan noise.
- Penggunaan Awal: During the first few hours of operation, a slight odor may be emitted. This is normal and will dissipate quickly as manufacturing residues burn off. Ensure adequate ventilation during this period.
Penyelenggaraan
Your Stelpro convector heater requires minimal maintenance to ensure optimal performance and longevity.
- Pembersihan: Bersihkan bahagian luar pemanas secara berkala dengan kain lembutamp cloth. Do not use abrasive cleaners or solvents. Ensure the heater is turned off and cool before cleaning.
- Penyingkiran habuk: Use a vacuum cleaner with a brush attachment to remove dust from the air intake and discharge grilles. This helps maintain efficient airflow.
- Pemeriksaan: Annually, inspect the heater for any signs of damage or loose connections. If any issues are found, contact a qualified electrician for inspection and repair.
- Jangan Halangan: Never block the air intake or discharge openings of the heater. This can lead to overheating and reduced efficiency.
Menyelesaikan masalah
If your Stelpro convector heater is not operating as expected, consult the following troubleshooting guide before contacting support.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pemanas tidak dihidupkan. | Tiada bekalan kuasa. Termostat ditetapkan terlalu rendah. Faulty wiring or thermostat. | Periksa pemutus litar. Tingkatkan tetapan termostat. Rujuk juruelektrik yang berkelayakan. |
| Pemanas menghasilkan haba yang tidak mencukupi. | Saiz bilik melebihi kapasiti pemanasan. Airflow obstructed. Isu penentukuran termostat. | Ensure heater matches room size (up to 150 sq ft). Clear obstructions from grilles. Recalibrate or replace thermostat. |
| Unusual odors during operation. | Initial burn-off of manufacturing residues. Pengumpulan habuk pada elemen pemanas. | Ensure ventilation; odor should dissipate. Clean heater as per maintenance section. |
If the problem persists after attempting these solutions, contact Stelpro customer support or a qualified electrician.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Stelpro |
| Nombor Model | ASHC1502WCW |
| Wattage | 1500W (at 240V) / 1125W (at 208V) |
| Voltage | 240 Volt |
| Amppemadam | 6.25 Amps |
| Dimensi Produk (D x W x H) | 3.94" x 28.63" x 17.56" (101mm x 727mm x 446mm) |
| Berat Barang | 15.7 paun |
| Liputan Pemanasan | Up to 150 sq feet |
| Ciri Khas | Cekap Tenaga, Pemanasan Pantas, Tidak Bersuara |
| Faktor Bentuk | Kabinet |
| warna | putih |
| Jenis Pemasangan | Lekap di dinding |
| Jenis Bahan Api | Elektrik |
| Penggunaan Dalaman/Luar | Dalaman |
| UPC | 626296203491 |
Waranti
The Stelpro Ultra-Quiet Wall Convector Heater (Model ASHC1502WCW) is backed by a comprehensive warranty:
- Waranti terhad 5 tahun on the entire unit.
- Waranti seumur hidup pada elemen pemanas.
- Waranti 3 tahun on electronic components.
Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the documentation included with your product or visit the official Stelpro webtapak.
Sokongan
For technical assistance, warranty inquiries, or to purchase replacement parts, please contact Stelpro customer service.
You can find more information and contact details on the official Stelpro webtapak: Visit the Stelpro Store on Amazon
When contacting support, please have your model number (ASHC1502WCW) and proof of purchase readily available.