PowerSmart 20V Robot Lawn Mower PDL08

1. Pengenalan

This manual provides detailed instructions for the setup, operation, and maintenance of your PowerSmart 20V Robot Lawn Mower, model PDL08. Designed for effortless lawn maintenance, this robotic mower covers areas up to 1/4 acre or 10,890 square feet. It features smart app control, intelligent charging, and a rain sensor for continuous, hassle-free operation. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

2. Maklumat Keselamatan

Always prioritize safety when operating the robot lawn mower. Keep hands and feet away from the cutting blades. Ensure the boundary wire is correctly installed to prevent the mower from entering unsafe areas. Do not operate the mower in conditions other than those specified in this manual. Children and pets should be kept away from the working area during operation. In case of emergency, press the STOP button immediately.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• Mesin Pemotong Rumput Robotik
• Stesen Pengecasan
• Unit Pengecasan (Penyesuai Kuasa)
• 200m Boundary Wire
• Hooks (approx. 350 pieces)
• Skru (4 keping)
• Membetulkan Kuku (6 keping)
• Bampar Stesen Pengecasan

4. Persediaan dan Pemasangan

Proper installation is crucial for the optimal performance of your robot lawn mower. Follow these steps carefully.

4.1 Penempatan Stesen Pengecasan

Select a flat and level position for the charging station. Ensure it is at least 2 meters from any walls and 1 meter from any paths or driveways. Avoid placing it near steps or windows where the mower could be damaged or cause damage.

Imej: Udara view of a lawn illustrating the coverage area of 1/4 acre and how secondary mowing areas can be set up.

4.2 Assembling the Charging Station

Attach the charging unit to the baseplate using the provided 4 screws. Route the power cable and boundary wire along the designated grooves on the underside of the baseplate to keep them tidy and protected.

4.3 Fixing the Charging Station

Secure the charging station to the ground using the 6 fixing nails. Ensure there is approximately 1 foot of space between the charging station and any adjacent sidewalks or walls to allow for proper docking.

4.4 Pemasangan Wayar Sempadan

Lay the boundary wire around the perimeter of your lawn. Avoid sharp angles; instead, use gentle curves. If parallel boundary wires are needed, ensure they are at least 10 cm apart. For obstacles like trees or flowerbeds, create a border around them, maintaining a distance of at least 1 meter from the obstacle to the wire. Bury the boundary wire in the ground to protect it and ensure a neat appearance.

4.5 Connecting the Boundary Wire

Connect the ends of the boundary wire to the designated positive (+) and negative (-) sockets on the charging station. Once connected, the LED indicator on the charging station should light up green, confirming a successful connection.

4.6 Pengecasan Awal

Gently push the robot lawn mower into the charging station. The mower will begin charging automatically. Ensure the battery is fully charged before the first operation.

5. Arahan Operasi

Learn how to operate your PowerSmart Robot Lawn Mower using its control panel and the Smart Life app.

5.1 Kuasa Awal Hidup dan Tetapan

1. After charging, press and hold the START button on the mower's control panel.
2. Select your desired language using the arrow keys and confirm with OK.
3. Tetapkan tarikh dan masa semasa.
4. Set a four-digit PIN for security.
5. Close the mower's cover to initiate operation.

5.2 Stopping Operation

To stop the mower at any time, press the large red STOP button located on the top of the unit. To resume operation, you will need to input your PIN.

5.3 Sambungan Aplikasi (Aplikasi Kehidupan Pintar)

The PowerSmart Robot Lawn Mower can be controlled via the Smart Life app. Follow these steps to connect:

1. Download the "Smart Life" app from your device's app store or by scanning the QR code below. Muat turun Aplikasi Smart Life
2. On the mower's control panel, navigate to "Setting" and then select "Set WiFi".
3. Open the Smart Life app on your smartphone and select "Add Device". The app should discover the mower.
4. Follow the in-app instructions to connect the mower to your home Wi-Fi network.

Image: The robotic lawn mower on a lawn, with a smartphone showing the Smart Life app interface for Bluetooth and WiFi settings, indicating how to connect the device.

5.4 Auto Mowing

In the standby or charging state, open the Smart Life app and click the "Auto" key. You can then set the desired working time for automatic mowing. The mower will automatically leave the charging station and begin mowing.

5.5 Fixed Mowing (Spot Mode)

For specific areas that require focused mowing, use the "Spot Mode". In the standby state, click the "Spot Mode" key in the app. The mower will mow in a concentrated pattern. To cancel the current task, press the "Cancel" key.

5.6 Pause State

During mowing, you can pause the current task by clicking the "Pause" key in the app. To resume, click the "Continue" key.

5.7 Setting Operating Times (Schedule)

From the standby or charging state, use the "Schedule" key in the app to set weekly mowing tasks. You can define up to two time periods for daily tasks, specifying start and end times for each day of the week.

5.8 Secondary Areas

The mower supports distributing mowing tasks across up to 5 secondary areas. In the app, select "Secondary Areas" to configure each zone. For each area, you can choose the distance from the charging station and set the percentage of time the mower spends in that specific area. Ensure the total percentage for all areas adds up to 100%.

5.9 Kembali ke Caj

To send the mower back to its charging station from the standby state, click the "Station" key in the app. The mower will automatically navigate back to the charging dock.

6. Ciri-ciri

The PowerSmart 20V Robot Lawn Mower offers several advanced features for convenient and efficient lawn care:

• Operasi automatik: Covers up to 1/4 acre (10,890 sq.ft) with ease, providing a consistently manicured lawn.
• Kawalan APP Pintar: Manage scheduling, adjust settings, and initiate or stop mowing tasks directly from your smartphone.
• Pengecasan Pintar: The mower automatically returns to its charging dock when battery levels are low and resumes mowing once fully charged.
• Penderia Hujan: Detects rain and pauses mowing until the weather clears, protecting the mower and preventing damage to your lawn.
• Quiet and Eco-Friendly: Operates quietly with zero emissions, offering a peaceful and environmentally conscious lawn care solution.
• Ketinggian pemotongan boleh laras: Features a cutting height range of 1 to 2.4 inches, allowing customization for different grass lengths.
• 8.7 Inch Cutting Circle: Equipped with large cutting plates for efficient and precise grass trimming.


Imej: Terperinci view of the mower's cutting mechanism, showing the adjustable cutting height and the 8.7-inch cutting circle.

• Pengelakan Halangan Automatik: Navigates around obstacles in your yard, ensuring smooth operation and preventing collisions.

Image: The robotic lawn mower intelligently navigating around an obstacle on the lawn.
• Prestasi Pendakian Cerun: Capable of climbing slopes up to 25 degrees (47%), suitable for varied terrain.


Image: The mower demonstrating its ability to climb slopes, indicating a maximum of 25 degrees or 47% slope.

• Rintangan Air IPX4: Designed to perform in various weather conditions, including rain, with an IPX4 rating.


Image: The robotic lawn mower operating in light rain, highlighting its IPX4 water resistance.

7. Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your robot lawn mower.

• Pembersihan: Regularly clean the mower's chassis, wheels, and cutting deck to remove grass clippings and debris. Use a soft brush or cloth. Do not use high-pressure water jets.
• Pemeriksaan Bilah: Check the cutting blades regularly for wear and damage. Replace dull or damaged blades to maintain cutting efficiency. Always wear protective gloves when handling blades.
• Penjagaan Bateri: Store the mower in a dry, protected area during off-season. Ensure the battery is fully charged before storage and periodically recharge it during long periods of inactivity to prolong battery life.
• Boundary Wire: Periodically inspect the boundary wire for any damage or breaks. Repair as necessary to ensure continuous operation.

8. Penyelesaian masalah

If you encounter issues with your PowerSmart Robot Lawn Mower, refer to the following common troubleshooting tips:

• Mower Not Starting: Ensure the battery is charged, the cover is closed, and the PIN has been entered correctly. Check if the boundary wire is properly connected and the LED on the charging station is green.
• Mower Not Charging: Verify that the charging station is powered on and the mower is correctly docked. Check for any obstructions preventing proper contact.
• Mower Leaving Boundary: Inspect the boundary wire for breaks or incorrect installation. Ensure the wire is laid according to the guidelines in Section 4.4.
• Pemotongan tidak rata: Check the cutting blades for sharpness and damage. Replace if necessary. Ensure the cutting height is set appropriately for your lawn.
• Isu Ketersambungan Apl: Ensure your smartphone is connected to the same Wi-Fi network as the mower. Restart both the mower and your smartphone, then attempt to reconnect via the Smart Life app.

For persistent issues, please contact PowerSmart customer support.

9. Spesifikasi

10. Waranti dan Sokongan

Your PowerSmart 20V Robot Lawn Mower is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, replacement parts, or any inquiries, please visit the official PowerSmart webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.