Invengo Stainless Steel Cat Water Fountain Instruction Manual

pengenalan

Thank you for choosing the Invengo Stainless Steel Cat Water Fountain. This manual provides essential information for the proper setup, operation, and maintenance of your new pet drinking fountain. Please read these instructions carefully before use to ensure optimal performance and the safety of your pets.

The Invengo Cat Water Fountain is designed to provide fresh, filtered water for cats, dogs, and small animals, encouraging them to drink more and stay hydrated. Its 3.2-liter capacity and durable stainless steel construction offer convenience and hygiene.

Ciri-ciri Produk

• Kapasiti 3.2L Besar: Menyediakan ample water, reducing refill frequency.
• Operasi Bising-Senyap: Operates at approximately 20dB for a peaceful environment.
• Two Water Flow Modes: Offers both bubbling fountain and gentle stream options.
• Keluli Tahan Karat Tahan Lama: Constructed from high-quality 304 stainless steel for hygiene and longevity.
• Tetingkap Paras Air Lutsinar: Allows for easy monitoring of water levels.
• Reka Bentuk Kalis Percikan: Features a raised rim to minimize spills.
• Sistem Penapisan 5 Lapisan: Ensures clean and fresh water by removing impurities.
• Mudah dibersihkan: Quick-detach design for simple hand washing.

Kandungan Pakej

Sahkan bahawa semua komponen terdapat dalam pakej:

• 1 x Water Dispenser (Stainless Steel Bowl and Lid)
• 1 x Pam Air
• 1 x Penyesuai Kuasa
• 4 x Filter Elements
• 4 x Foam Sponges
• 1 x Manual Arahan

Image: Complete package contents of the Invengo Cat Water Fountain, including the stainless steel unit, power adapter, filters, and sponges.

Arahan Persediaan

Follow these steps to set up your Invengo Cat Water Fountain:

1. Buka Pembungkusan Komponen: Keluarkan semua item dari bungkusan dengan berhati-hati.
2. Komponen bilas: Wash the stainless steel bowl, lid, and pump thoroughly with water. Do not use soap on the pump.
3. Sediakan Penapis: Rinse the filter element and foam sponge under running water to remove any loose carbon dust.
4. Pasang Pam: Place the foam sponge over the outer perimeter of the water pump, ensuring it does not obstruct the indicator light.
5. Pasang Penapis: Insert the filter element into its designated slot on the lid assembly.
6. Place Pump: Secure the pump into the bottom of the lid assembly.
7. Isi Air: Fill the stainless steel bowl with water up to the MAX line. Do not overfill.
8. Pasang Tudung: Carefully place the lid assembly onto the stainless steel bowl, ensuring the pump's power cord is routed through the designated groove to prevent pinching.
9. Sambungkan Kuasa: Palamkan penyesuai kuasa ke salur keluar dinding.

Image: Step-by-step visual guide for setting up the Invengo Cat Water Fountain.

Arahan Operasi

Once assembled and filled, the fountain will begin operating automatically when plugged in. The fountain offers two distinct water flow modes:

• Faucet Flow: Provides a stream of water similar to a tap.
• Fountain Flow: Offers a gentle bubbling water surface.

You can switch between these modes by adjusting the spout attachment on the lid. The transparent window allows you to monitor the water level at a glance. Ensure the water level is always maintained above the minimum mark to prevent pump damage and ensure quiet operation.

Image: The Invengo Cat Water Fountain showcasing its transparent water level window and the two available water flow options: faucet and fountain.

Image: A cat resting peacefully next to the Invengo Cat Water Fountain, illustrating its ultra-quiet operation at 20dB.

Penyelenggaraan

Pembersihan dan penggantian penapis yang kerap adalah penting untuk mengekalkan kualiti air dan memanjangkan jangka hayat air pancut anda.

Penyelenggaraan Harian:

• Check the water level through the transparent window and refill as needed.
• Wipe down the stainless steel bowl to remove any dust or debris.

Pembersihan Mingguan:

1. Cabut palam pancutan air dari soket kuasa.
2. Disassemble the fountain by removing the lid and pump assembly.
3. Wash the stainless steel bowl and lid with warm water and a mild, pet-safe detergent. Rinse thoroughly.
4. Clean the pump: Disassemble the pump and clean all parts, including the impeller, with a small brush to remove any hair or debris. Rinse thoroughly.
5. Reassemble the fountain and refill with fresh water.

Image: A person demonstrating the easy cleaning process of the Invengo Cat Water Fountain, highlighting its quick-detach design.

Penggantian Penapis:

The 5-layer filtration system includes a filter element and a foam sponge. Replace these components every 2 to 4 weeks, or more frequently if you have multiple pets or notice reduced water flow/quality.

Image: Detailed diagram illustrating the 5-layer filtration system of the Invengo Cat Water Fountain, showing non-woven fabric, activated carbon, ion-exchange resin, and Maifan stone layers.

Image: Invengo replacement filters and foam sponges for the cat water fountain.

Menyelesaikan masalah

Spesifikasi

Maklumat Waranti

The Invengo Cat Water Fountain comes with the following warranty:

• Water Dispenser (Main Unit): One (1) year warranty from the date of purchase.
• Pam air: Two (2) year warranty from the date of purchase.

This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, neglect, accidents, or unauthorized modifications. Please retain your proof of purchase for warranty claims.

Sokongan Pelanggan

For any questions, concerns, or technical assistance, please contact Invengo Customer Service:

• e-mel: service@invengo.com
• Ketersediaan: 24/7 Customer Service Support

Our team is dedicated to providing exceptional support and ensuring your satisfaction with Invengo products.