pengenalan
The COROS Bike Cadence Sensor is designed to help cyclists track their pedaling RPMs (revolutions per minute) to improve pedaling efficiency. This sensor is compatible with both outdoor and indoor rides, including most spin bikes, and pairs seamlessly with bike computers, smartwatches, or smartphones via Bluetooth connectivity.
Apa yang ada dalam Kotak
Selepas membuka pakej, anda akan mendapati komponen berikut:
- COROS Bike Cadence Sensor
- Pemasangan Sensor
- Rubber Bands for mounting
- Panduan Mula Pantas
- Maklumat Keselamatan Produk
Persediaan dan Pemasangan
1. Pemasangan Bateri
The COROS Bike Cadence Sensor uses a CR2032 coin cell battery. Ensure the battery is correctly inserted before use. The battery compartment is typically located on the back of the sensor.
2. Memasang Penderia
The sensor is designed for easy installation on your bike's crank arm. Use the provided rubber bands to securely attach the sensor. Position the sensor on the non-drive side crank arm for optimal cadence tracking.
3. Berpasangan dengan Peranti
The COROS Bike Cadence Sensor connects via Bluetooth. To pair, activate the sensor by rotating the crank arm a few times. Then, open the settings on your compatible bike computer, smartwatch, or smartphone application and search for new Bluetooth devices. Select the COROS Cadence Sensor from the list to establish a connection. The sensor is not compatible with ANT+ devices.
Arahan Operasi
Once paired, the sensor will automatically begin tracking your pedaling RPMs when you start cycling. This data is transmitted in real-time to your connected device, allowing you to monitor and optimize your pedaling efficiency. The sensor works effectively for both outdoor rides and indoor training sessions, including use with most spin bikes.
Penyelenggaraan
Hayat dan Penggantian Bateri
The CR2032 battery in your COROS Bike Cadence Sensor is designed to last up to 12 months under typical usage conditions. When the battery level is low, your connected device may display a notification. To replace the battery, carefully open the battery compartment, remove the old battery, and insert a new CR2032 battery with the positive (+) side facing up. Ensure the compartment is sealed tightly after replacement.
Pembersihan dan Rintangan Air
The sensor has an IP67 water rating, providing protection against dust and temporary immersion in water. This makes it suitable for all-weather protection and durability. To clean the sensor, wipe it with a damp kain. Elakkan penggunaan bahan kimia yang keras atau bahan kasar yang boleh merosakkan peranti.
Menyelesaikan masalah
- Sensor Tidak Menyambung: Ensure the sensor has a fresh battery and is properly activated by rotating the crank arm. Check that Bluetooth is enabled on your receiving device and that the sensor is within range.
- Bacaan Tidak Tepat: Verify that the sensor is securely mounted on the crank arm and is not obstructed. Ensure there are no strong electromagnetic interferences nearby.
- Bateri Habis Cepat: Confirm that the sensor is not left in an active state when not in use. Replace the battery if it is old or if the issue persists.
Spesifikasi
| Jenama | COROS |
| Nama Model | COROS Bike Cadence Sensor |
| warna | Hitam |
| Jenis Sensor | Sensor irama |
| Teknologi Ketersambungan | Bluetooth (Not compatible with ANT+ devices) |
| Jenis Pemasangan | Crank Arm Mount |
| Jenis Bateri | CR2032 Lithium Manganese Dioxide |
| Hayat Bateri | Sehingga 12 bulan |
| Penilaian Air | IP67 |
| Berat badan | 11g |
| Dimensi Item (LxWxH) | 3.94 x 3.94 x 3.94 inci |
Waranti dan Sokongan
The COROS Bike Cadence Sensor comes with a 1-year manufacturer's warranty. For technical support, warranty claims, or additional product information, please visit the official COROS webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan bukti pembelian anda untuk pengesahan waranti.
