Electactic YH-2211

Electactic 20 inch Electric Fireplace Heater User Manual

Model: YH-2211

pengenalan

Thank you for choosing the Electactic 20 inch Electric Fireplace Heater. This manual provides important information for the safe operation, installation, maintenance, and troubleshooting of your new electric fireplace heater. Please read all instructions carefully before use and retain this manual for future reference.

This electric fireplace heater features a realistic 3D flame effect, three heating modes (1000W & 1500W), an adjustable thermostat, and overheat protection for enhanced safety and comfort. Its cathedral design with an arched door and fence adds a classic aesthetic to any room.

Maklumat Keselamatan Penting

Apabila menggunakan peralatan elektrik, langkah berjaga-jaga asas hendaklah sentiasa diikuti untuk mengurangkan risiko kebakaran, kejutan elektrik dan kecederaan kepada orang, termasuk yang berikut:

  • Baca semua arahan sebelum menggunakan pemanas ini.
  • Pemanas ini panas semasa digunakan. Untuk mengelakkan luka bakar, jangan biarkan kulit telanjang menyentuh permukaan panas. Jauhkan bahan yang mudah terbakar, seperti perabot, bantal, tempat tidur, kertas, pakaian, dan langsir sekurang-kurangnya 3 kaki (0.9 m) dari bahagian depan pemanas dan jauhkan dari sisi dan belakang.
  • Berhati-hati yang amat diperlukan apabila mana-mana pemanas digunakan oleh atau berhampiran kanak-kanak atau orang yang tidak sah dan apabila pemanas dibiarkan beroperasi dan tanpa pengawasan.
  • Sentiasa cabut plag pemanas apabila tidak digunakan.
  • Jangan kendalikan mana-mana pemanas dengan kord atau palam yang rosak atau selepas pemanas tidak berfungsi, telah terjatuh atau rosak dalam apa jua cara. Kembalikan pemanas ke kemudahan servis yang dibenarkan untuk pemeriksaan, pelarasan elektrik atau mekanikal, atau pembaikan.
  • Jangan gunakan di luar rumah.
  • Jangan sekali-kali mencari pemanas di mana ia boleh jatuh ke dalam tab mandi atau bekas air lain.
  • Jangan gunakan tali di bawah permaidani. Jangan tutup tali dengan permaidani lempar, pelari, atau penutup yang serupa. Susun kord jauh dari kawasan lalu lintas dan di mana ia tidak akan tersandung.
  • Untuk memutuskan sambungan pemanas, matikan kawalan, kemudian tanggalkan palam dari alur keluar.
  • Jangan masukkan atau benarkan objek asing memasuki mana-mana pengudaraan atau bukaan ekzos kerana ini boleh menyebabkan kejutan elektrik atau kebakaran, atau merosakkan pemanas.
  • Untuk mengelakkan kebakaran yang mungkin berlaku, jangan sekat saluran masuk atau ekzos udara dalam apa jua cara. Jangan gunakan pada permukaan lembut, seperti katil, di mana bukaan mungkin tersumbat.
  • Pemanas ini mempunyai bahagian panas dan arka atau percikan api di dalamnya. Jangan gunakannya di kawasan di mana petrol, cat, atau wap atau cecair mudah terbakar digunakan atau disimpan.
  • Gunakan pemanas ini hanya seperti yang diterangkan dalam manual ini. Sebarang penggunaan lain yang tidak disyorkan oleh pengilang boleh menyebabkan kebakaran, kejutan elektrik atau kecederaan kepada orang.
  • Sentiasa pasangkan pemanas terus ke salur keluar dinding/bekas. Jangan sekali-kali gunakan dengan kord sambungan atau paip kuasa yang boleh dipindahkan (alur keluar/jalur kuasa).
  • The air outlet is designed at the bottom of the stove to effectively avoid overheating and high temperature hazards to the main unit. Ensure this area is not blocked.

Kandungan Pakej

Sila semak untuk memastikan semua komponen ada dan tidak rosak:

  • Electactic 20 inch Electric Fireplace Heater Unit
  • Kord Kuasa (prapasang)
  • Manual Pengguna

Persediaan

  1. Membongkar: Carefully remove the electric fireplace heater from its packaging. Retain packaging for future storage or shipping.
  2. penempatan: Place the heater on a firm, level surface. Ensure there is at least 3 feet (0.9 m) of clearance from any combustible materials (e.g., curtains, furniture, bedding) on all sides and the top. Do not block the air intake or exhaust vents.
  3. Sambungan Kuasa: Ensure the heater is turned OFF before plugging it into a standard 120V AC electrical outlet. Do not use an extension cord.
Electactic 20 inch Electric Fireplace Heater in a living room setting
The Electactic 20 inch Electric Fireplace Heater in a living room. Ensure proper clearance from surrounding objects.

Arahan Operasi

The controls for the electric fireplace heater are located on the front panel, typically behind the decorative door.

jarak dekat view of the control panel on the Electactic electric fireplace heater
Control panel with thermostat knob, flame on/off switch, heating settings, and flame dimmer.
  1. HIDUP/MATI Kuasa: Locate the main power switch (often labeled 'Flame On/Off' or a simple 'I/O' switch). Flip it to the 'I' position to turn on the unit and activate the flame effect.
  2. Pelarasan Kesan Nyalaan: Use the 'Flame Dimmer Control' knob to adjust the brightness of the realistic 3D flame effect. Turn clockwise to increase brightness, counter-clockwise to decrease.
  3. Mod Pemanasan: The heater offers two heating settings: 750W and 1500W. Use the corresponding switches to select your desired heat output. You can use the flame effect independently without heat.
  4. Kawalan Termostat: The 'Thermostat Control Knob' allows you to set the desired room temperature. Turn the knob clockwise to increase the temperature setting. The heater will cycle on and off to maintain the set temperature. The temperature range is approximately 32-185°F (0-85°C).
Realistic 3D flame effect and glowing logs inside the electric fireplace
Experience the lifelike 3D flame effect, enhancing the ambiance of your room.
Temperature control graph showing range from 32F to 185F
The adjustable thermostat allows precise temperature control for optimal comfort.

Penyelenggaraan

Penyelenggaraan berkala memastikan prestasi optimum dan jangka hayat pemanas pendiang elektrik anda.

  • Pembersihan: Sentiasa cabut plag pemanas sebelum membersihkan. Gunakan kain lembut danamp kain untuk mengelap permukaan luar. Jangan gunakan pembersih atau semburan yang kasar.
  • Bolong Udara: Periodically check and clean the air intake and exhaust vents to ensure they are free from dust and debris. A vacuum cleaner with a brush attachment can be used.
  • Storan: If storing the heater for an extended period, unplug it and store it in a cool, dry place, preferably in its original packaging.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Pemanas tidak dihidupkan.No power to the unit; main power switch is off; thermostat set too low.Check power outlet and circuit breaker; ensure main power switch is ON; increase thermostat setting.
Tiada keluaran haba.Heating mode not selected; thermostat set too low; overheat protection activated.Ensure a heating mode (750W or 1500W) is selected; increase thermostat setting; unplug unit for 15 minutes to reset overheat protection.
Kesan nyalaan tidak berfungsi.Flame effect switch is off; bulb needs replacement.Ensure flame effect switch is ON; consult manufacturer for bulb replacement instructions.
Bunyi atau bau yang luar biasa.Dust accumulation; internal component issue.Unplug and clean vents. If issue persists, discontinue use and contact customer support.

Spesifikasi

CiriPerincian
JenamaElektik
Nombor ModelYH-2211
Dimensi Produk (D x W x H)12.2"D x 19.8"W x 22.64"H
bahanKeluli Aloi
Sumber KuasaElektrik Bertali
Keluaran Haba1500 Watts (also 1000W setting)
Ciri KhasAdjustable Thermostat, Overheat Protection, 3D Hyper-Realistic Flame
Jenis PemasanganFreestanding
warnaHitam
Jenis PengudaraanVent percuma

Waranti dan Sokongan

This Electactic Electric Fireplace Heater comes with a limited warranty. For specific warranty details, please refer to the documentation included with your purchase or contact Electactic customer support.

For technical assistance, replacement parts, or any questions regarding your product, please contact Electactic customer support through their official webtapak atau maklumat hubungan yang diberikan pada pembungkusan produk anda.

© 2026 Electactic. All rights reserved.