DURATECH 20V 18GA Cordless Brad Nailer and Staple Gun Instruction Manual

1. Maklumat Keselamatan

AMARAN: Sentiasa baca dan fahami semua amaran dan arahan keselamatan sebelum mengendalikan alat ini. Kegagalan mematuhi amaran dan arahan boleh mengakibatkan renjatan elektrik, kebakaran dan/atau kecederaan serius.

• Sentiasa pakai cermin mata keselamatan atau cermin mata keselamatan dengan pelindung sisi dan, jika perlu, pelindung muka penuh semasa mengendalikan produk ini.
• To avoid accidental firing, keep fingers AWAY from triggers when not driving fasteners.
• Do not alter or remove triggers.
• NEVER point the tool at yourself or others in the work area when connecting the battery and when using or handling the tool. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
• To avoid battery over-discharge and potential damage, recharge the device at least once every three months.

2. Produk Lebihview

Kandungan Pakej

• Tanpa wayar Brad Nailer
• 1000pcs 1-1/4" Staples
• 1000pcs 1-9/16" Nails
• Bateri Li-ion 2.0Ah
• Pengecas Pantas 1 Jam
• Membawa Sarung
• Manual Arahan

Komponen Alat

Figure 1: Labeled components of the DURATECH 20V 18GA Cordless Brad Nailer.

Dimensi dan Berat

Figure 2: Physical dimensions and weight of the nailer (without battery).

• Panjang: 10.83 inci (27.5 cm)
• Lebar: 9.45 inci (24 cm)
• Weight: 6.19 lbs (without battery)

3. Persediaan

Pemasangan Bateri

1. Ensure the battery is fully charged using the provided 1-hour quick charger.
2. Jajarkan bateri dengan slot bateri pada alat.
3. Luncurkan bateri ke dalam slot sehingga ia mengklik pada tempatnya dengan selamat.

Loading Fasteners (Nails/Staples)

Figure 3: Steps for inserting staples or nails into the magazine.

1. Tekan butang pelepas dan tarik keluar kulit majalah.
2. Tilt the tool and place nails/staples into the track of the magazine channel. Ensure the fastener points are placed against the bottom of the magazine.
3. Tutup kulit majalah sehingga ia terlibat dengan butang pelepas.

paku Viewer Tingkap

kuku viewer window allows you to quickly check the fastener level. When the window shows merah, it indicates the magazine is without nails. When it shows hitam, it indicates the magazine contains nails.

4. Arahan Operasi

Mod Menembak

The nail gun features two firing modes: Single Firing Mode and Contact Firing Mode. Select the desired mode using the switch located near the LED indicator.

Figure 4: Firing mode selection switch.

Mod Menembak Tunggal

• Shift the mode switch to the sebelah kiri (single firing icon).
• Depress the contact pin against the workpiece.
• Squeeze the trigger to fire a single fastener.

Hubungi Kaedah Menembak

• Shift the mode switch to the sebelah kanan (contact firing icon).
• Picit pencetus.
• Depress the contact pin against the workpiece to fire fasteners continuously as the tool is moved along the surface.

Nota: If the contact pin is not depressed against the workpiece before squeezing the trigger (in single firing mode) or if the trigger is not squeezed before depressing the contact pin (in contact firing mode), the nail gun will not shoot fasteners due to the safety protection device.

Pelarasan Kedalaman

Adjust the fastener driving depth using the depth adjustment wheel located near the contact pin. Turning the wheel allows you to set the desired depth for various materials and applications.

Figure 5: Depth adjustment wheel.

Pencahayaan LED

The tool is equipped with LED lights on both sides to illuminate the work area, which is particularly useful in low-light conditions. The LED lighting can be activated via the LED Lighting & Indicator Switch.

Figure 6: LED lighting for the work area.

Penunjuk LED

The LED indicator provides visual feedback on the tool's status:

Figure 7: LED indicator and its meanings.

• Merah Hidup: Bateri lemah.
• Merah Berkelip: Nails/staples are jammed.
• Hijau Hidup: No nails/staples in the magazine.
• Berkelip Hijau: Terlalu panas.
• Tutup lampu: Keadaan operasi biasa.

Video Produk Rasmi

Video 1: This official video demonstrates the product's features, including loading fasteners, LED indicators, firing modes, and depth adjustment.

5. Penyelenggaraan

Clearing Jammed Fasteners

If the LED indicator turns red and flashes, it signifies that nails/staples are jammed. Follow these steps to clear the jam:

Figure 8: Quick Release Mechanism.

1. Remove the battery from the tool to prevent accidental firing.
2. Open the magazine using the quick release mechanism.
3. Carefully remove any jammed nails or staples from the magazine channel. A small tool like a screwdriver may be used to assist, but ensure it does not damage the tool.
4. Close the magazine and reinsert the battery.

Penjagaan Bateri

• Always use the provided DURATECH 20V Li-ion battery and charger.
• Recharge the battery at least once every three months to prevent over-discharge and potential damage, even if not in use.
• Simpan bateri di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.

6. Penyelesaian masalah

Refer to the LED Indicator section (Section 4) for common issues and their corresponding indicator lights. If the issue persists after following the recommended steps (e.g., clearing jams, recharging battery), please contact customer support.

7. Spesifikasi

Compatible Fasteners

Figure 9: Compatible nail and staple types.

8. Waranti dan Sokongan

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official DURATECH website. Ensure you have your model number (024009) and purchase details available when contacting support.