Hiicam Speed10

Hiicam Speed10 4K Action Camera User Manual

Model: Speed10

pengenalan

Thank you for choosing the Hiicam Speed10 4K Action Camera. This manual provides essential information for setting up, operating, and maintaining your device. Please read it thoroughly before use to ensure proper functionality and to maximize your camera's performance.

The Hiicam Speed10 is designed to capture high-quality video and photos in various environments, featuring 4K 60FPS video recording, 20MP photo resolution, Electronic Image Stabilization (EIS), and waterproof capabilities up to 131 feet (40 meters) with the included housing. It also includes dual screens, remote control, and WiFi connectivity for enhanced usability.

Kandungan Pakej

Sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:

  • Speed10 Action Camera x 1
  • Alat kawalan jauh x 1
  • Bateri 1350 mAh x 2
  • Panduan Pantas x 1
  • Useful Accessories (various mounts and cables)
Hiicam Speed10 Action Camera and all included accessories laid out

Image: The Hiicam Speed10 Action Camera and its complete set of accessories, including batteries, remote, and various mounting options.

Persediaan

1. Mengecas Bateri

  1. Insert the 1350mAh batteries into the dual battery charger.
  2. Connect the charger to a USB power source using the provided cable.
  3. The indicator light on the charger will show charging status. A full charge typically takes approximately 120 minutes.
Hiicam Speed10 1350mAh battery being charged

Image: A 1350mAh battery for the Hiicam Speed10 camera, illustrating its capacity and charging process.

2. Inserting the Battery and Micro SD Card

  1. Buka penutup petak bateri di bahagian bawah kamera.
  2. Insert a fully charged 1350mAh battery, ensuring correct polarity.
  3. Insert a Micro SD card (up to 256GB, not included) into the designated slot until it clicks into place. Ensure the card is formatted correctly (FAT32 or exFAT).
  4. Tutup penutup petak bateri dengan selamat.
Hiicam Speed10 action camera with a 1350mAh battery being inserted

Image: A 1350mAh battery being inserted into the Hiicam Speed10 action camera.

3. Menghidupkan/Mematikan

  • To power on: Press and hold the Power/Mode button (usually on the front or top) for 3 seconds.
  • To power off: Press and hold the Power/Mode button for 3 seconds.

Arahan Operasi

1. Navigating the Menus

  • The Hiicam Speed10 features a 2-inch rear IPS touch screen and a 1.4-inch front display.
  • Use the touch screen to navigate through modes and settings. Swipe left/right or tap icons to select options.
  • The front screen is useful for framing selfies or vlogging.
Hiicam Speed10 action camera showing its dual screens

Image: The Hiicam Speed10 action camera displaying its front and rear screens, useful for framing shots and selfies.

2. Rakaman Video

  • Press the Power/Mode button repeatedly to cycle to Video Mode.
  • Press the Shutter/OK button to start recording. Press again to stop.
  • The camera supports 4K resolution at 60 frames per second (FPS).
Hiicam Speed10 action camera capturing a snowboarder in 4K 60FPS

Image: The Hiicam Speed10 action camera recording a snowboarder, demonstrating its 4K 60FPS video capability.

3. Tangkapan Foto

  • Press the Power/Mode button repeatedly to cycle to Photo Mode.
  • Tekan butang Pengatup/OK untuk mengambil foto.
  • Kamera ini merakam imej 20MP.

4. Penstabilan Imej Elektronik (EIS)

  • EIS helps to stabilize footage, reducing shake and blur.
  • EIS is supported at 4K30FPS resolution or lower. It is not available at 4K60FPS.
  • To enable/disable EIS, navigate to the video settings menu and select the EIS option.
Perbandingan video footage with EIS off (blurry) and EIS on (stable) from a motorcycle

Image: A visual comparison demonstrating the effect of Electronic Image Stabilization (EIS) on video footage, showing a clear difference between unstable (EIS off) and stable (EIS on) recording.

5. Operasi Kalis Air

  • The camera is waterproof up to 131 feet (40 meters) only when enclosed in its waterproof housing.
  • Before submerging, ensure the waterproof housing is properly sealed and free from debris.
  • After underwater use, rinse the housing with fresh water and allow it to dry completely.
Diver with Hiicam Speed10 action camera in waterproof housing underwater

Image: A diver using the Hiicam Speed10 action camera in its waterproof housing during an underwater activity, highlighting its capability for deep dives.

6. Remote Control and WiFi Connectivity

  • The included remote control allows for convenient start/stop recording and photo capture from a distance.
  • Connect the camera to the dedicated smartphone app via WiFi to control settings, view hidup footage, dan pemindahan files secara wayarles.
  • Refer to the Quick Guide for detailed instructions on pairing the remote and connecting to the app.
Smartphone app interface for Hiicam Speed10 WiFi control

Image: A smartphone displaying the Hiicam Speed10 companion app interface, demonstrating wireless control and media management via WiFi.

Penyelenggaraan

  • Pembersihan: Use a soft, lint-free cloth to clean the camera lens and screens. For stubborn smudges, a lens cleaning solution can be applied to the cloth (not directly to the lens).
  • Perumahan kalis air: Regularly inspect the waterproof housing's O-ring for dirt, hair, or damage. Clean and lubricate the O-ring as needed to maintain its seal.
  • Storan: Simpan kamera di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau. Tanggalkan bateri jika disimpan untuk tempoh yang lama.
  • Penjagaan Bateri: Avoid fully discharging the batteries. Recharge them regularly, even if not in use, to prolong their lifespan.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Kamera tidak dihidupkanBateri mati atau salah dimasukkan.Cas bateri sepenuhnya. Masukkan semula bateri dengan betul.
Tidak boleh merakam video/mengambil fotoMicro SD card is full, corrupted, or not inserted.Insert a new/formatted Micro SD card. Format the card in the camera settings.
Footage is shakyEIS is off or resolution is 4K60FPS.Enable EIS in settings (if resolution is 4K30FPS or lower).
Water leakage in housingO-ring is dirty, damaged, or housing not sealed properly.Inspect and clean O-ring. Ensure housing is securely latched.
Isu sambungan WiFiIncorrect password, camera WiFi not enabled, or app issues.Ensure WiFi is enabled on camera. Re-enter password. Restart camera and app.

Spesifikasi

  • Jenama: Hiicam
  • model: Kelajuan10
  • Resolusi Video: Sehingga 4K 60FPS
  • Resolusi Foto: 20MP
  • Penstabilan Imej: Electronic Image Stabilization (EIS) (supported at 4K30FPS or lower)
  • Kedalaman kalis air: 131FT (40m) with waterproof housing
  • paparan: 2-inch Rear IPS Touch Screen, 1.4-inch Front Display
  • Ketersambungan: WiFi, Remote Control
  • Storan: Micro SD card, up to 256GB (not included)
  • Bateri: 2 x 1350mAh Lithium Ion (included)
  • Dimensi: 2.28 x 0.94 x 1.61 inci
  • Berat: 1.1 paun

Waranti dan Sokongan

For warranty information and technical support, please refer to the official Hiicam website or contact customer service through your purchase platform. Keep your proof of purchase for warranty claims.

Sokongan dalam talian: Lawati Hiicam Store on Amazon untuk sumber tambahan dan pilihan hubungan.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.