Andeman Ep155 & Ep177 Car Jump Starter with Air Compressor User Manual

1. Pengenalan

This manual provides essential information for the safe and effective operation of your Andeman Ep155 or Ep177 Car Jump Starter with Air Compressor. Please read this manual thoroughly before using the device and retain it for future reference. This device is designed to jump start 12V vehicles and, for the Ep177 model, also functions as a portable tire inflator and power bank.

2. Maklumat Keselamatan

WARNING: Improper use can result in injury or damage to the device and vehicle. Always follow these safety guidelines.

Jauhkan daripada kanak-kanak.
Jangan rendam peranti di dalam air.
Jangan beroperasi dalam atmosfera mudah meletup, seperti dalam kehadiran cecair mudah terbakar, gas atau habuk.
Pastikan pengudaraan yang betul semasa digunakan.
Do not disassemble the device. Contact qualified service personnel for repairs.
Avoid direct exposure to sunlight or high temperatures.
Gunakan hanya cl pintar yang disediakanamps dan aksesori.
Pastikan peranti dicas sepenuhnya sebelum digunakan untuk prestasi optimum.
The device features 10 advanced safety protections, including Overload Protection, Sparks Protection, Reverse Charges Protection, Reverse Polarities Protection, Over Currents Protection, Low Temperature Protection, Over Charges Protection, and Short Circuits Protection.

Diagram illustrating 10 safety protections of the Andeman jump starter — Figure 2.1: The Andeman jump starter incorporates 10 safety protections for secure operation, including safeguards against overcharge, over-discharge, overcurrent, short circuit, overvoltage, reverse connection, over temperature, voltage regulation, reverse charge, and reverse polarity.

3. Produk Lebihview dan Komponen

Your Andeman Car Jump Starter is a multi-functional device designed for emergency vehicle starting, and for the Ep177 model, also includes a portable air compressor and power bank capabilities.

Andeman jump starter with smart clamps and inflation nozzles — Figure 3.1: The Andeman jump starter unit shown with its smart battery clamps and various inflation nozzles for different applications.

Andeman jump starter demonstrating both jump start and tire inflation functions — Figure 3.2: This image highlights the dual functionality of the Ep177 model, serving as both a 4000A jump starter and a 150PSI tire inflator.

Kandungan Pakej:

Andeman Car Jump Starter (Ep155 or Ep177)
Bateri Pintar Clamps
Kabel Pengecas USB-C
Inflation Nozzles (for Ep177 model)
Manual Pengguna

4. Spesifikasi

Ciri	Ep155 Model	Ep177 Model
Arus Puncak	3000A	4000A
Kapasiti Bateri	20000mAh	24000mAh
Keserasian Enjin (Gas)	Sehingga 9.0L	Sehingga 8.5L
Keserasian Enjin (Diesel)	Sehingga 7.0L	Sehingga 7.0L
Starts per Charge	Sehingga 80 kali ganda	Sehingga 70 kali ganda
Masa Tunggu Sedia	24 bulan	48 bulan
Air Compressor (PSI)	T/A	Up to 150PSI
Charging Input (Type-C)	5V/3A, 9V/2A, 12V/1.5A
Keluaran USB-A	QC3.0
Output USB-B	5V/3A
Keluaran DC	15V
Masa Pengecasan Penuh	Lebih kurang 1.8 jam
Lampu suluh LED	240 Lumens, 36 hours battery life

Andeman 4000A Jump Starter connected to a car battery in an engine bay — Figure 4.1: The Ep177 model, a 4000A jump starter, is suitable for various 12V vehicles, capable of starting 8.5L gas or 7L diesel engines.

5. Persediaan dan Pengecasan

5.1 Caj Permulaan

Before first use, fully charge the jump starter. Connect the provided USB-C charging cable to the device's Type-C input port and a suitable USB power adapter (not included). The device supports bi-directional fast charging, achieving a full charge from 0% to 100% in approximately 1.8 hours.

Andeman jump starter being charged via Type-C cable in a car console — Figure 5.1: The jump starter can be fast-charged via its Type-C port, allowing for quick readiness. A 10-minute charge can provide enough power for a jump start.

5.2 Menyemak Tahap Bateri

The device features a digital display or indicator lights to show the current battery level. Ensure the device has sufficient charge before attempting to jump start a vehicle or inflate tires.

6. Arahan Operasi

6.1 Lompat Memulakan Kenderaan

Pastikan jump starter dicas sekurang-kurangnya 50%.
Matikan pencucuh kenderaan dan semua aksesori.
Sambungkan merah (+) clamp to the vehicle's positive (+) battery terminal.
Sambungkan hitam (-) clamp to the vehicle's negative (-) battery terminal or a solid, unpainted metal part of the engine block.
Pasang cl pintaramp connector into the jump starter's port. The indicator light on the smart clamp should turn green, indicating a correct connection. If it's red or flashing, check connections and battery voltage.
Start the vehicle. If it doesn't start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds per attempt.
Once the vehicle starts, immediately disconnect the smart clamp connector from the jump starter.
Remove the black (-) clamp pertama, kemudian merah (+) clamp daripada bateri kenderaan.

6.2 Using the Air Compressor (Ep177 Model Only)

The Ep177 model features a built-in air compressor capable of delivering up to 150PSI.

Connect the air hose to the tire valve stem. Ensure a secure connection to prevent air leakage.
Power on the jump starter. The current tire pressure will be displayed.
Gunakan butang '+' dan '-' untuk menetapkan tekanan yang dikehendaki.
Press the inflation button to start the compressor. The compressor will automatically stop once the preset pressure is reached.
Tanggalkan hos udara daripada injap tayar.

Note: For continuous use, it is recommended to rest the compressor for 10 minutes after every 10 minutes of operation to prevent overheating. A full charge can inflate 195/60 R15 tires from 0 to full approximately 4-5 times.

Andeman jump starter with digital display showing tire pressure and inflation icons — Figure 6.1: The Ep177 model's digital display shows current pressure and allows setting target pressure for tire inflation. It can inflate various items including car, motorcycle, bicycle tires, and sports equipment.

6.3 Menggunakan sebagai Power Bank

The jump starter can also function as a portable power bank to charge electronic devices.

Connect your device's charging cable to the appropriate output port on the jump starter (USB-A QC3.0, USB-B 5V/3A, or Type-C 5V/3A, 9V/2A, 12V/1.5A).
The device will automatically begin charging.
The DC15V output port can power compatible devices like tire inflators (if not using the built-in one) or car refrigerators.

Andeman jump starter charging multiple devices like a laptop, smartwatch, and smartphone — Figure 6.2: The 24000mAh capacity allows the jump starter to serve as a power bank, compatible with over 1000 devices, including laptops, smartwatches, and smartphones.

6.4 Menggunakan Lampu Suluh LED

The built-in 240 lumens LED flashlight offers multiple modes for various situations.

Press the flashlight button once to turn on the steady light.
Press again for SOS mode (flashing slowly).
Press a third time for Strobe mode (flashing rapidly).
Tekan kali keempat untuk mematikan lampu suluh.

The flashlight provides up to 36 hours of battery life.

Andeman jump starter's LED flashlight illuminating various scenarios like camping, roadside emergency, power failure, and car repair — Figure 6.3: The 240 lumens LED flashlight provides illumination for outdoor camping, roadside emergencies, power failures, and car repair tasks.

7. Penyelenggaraan

7.1 Mengecas

To maintain optimal battery health, recharge the jump starter every 3-6 months, even if not in use. This prevents deep discharge and extends battery life.

7.2 Penyimpanan

Simpan peranti di tempat yang sejuk dan kering, jauh dari cahaya matahari langsung dan suhu yang melampau.
Keep the device and accessories in the provided carrying case to protect them from damage.

7.3 Pembersihan

Lap peranti dengan kain lembut dan kering. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.

8. Penyelesaian masalah

8.1 Vehicle Does Not Start

Periksa tahap bateri: Pastikan jump starter mempunyai cas yang mencukupi.
Semak sambungan: Sahkan bahawa lampu pintarampdisambungkan dengan selamat ke terminal bateri yang betul (merah ke positif, hitam ke negatif).
Pintar clamp penunjuk: If the indicator is red or flashing, refer to the smart clamp's instructions for error codes.
Vehicle battery condition: If the vehicle battery is severely damaged or completely dead, the jump starter may not be able to start it.

8.2 Air Compressor Not Working (Ep177 Only)

Periksa tahap bateri: Pastikan jump starter mempunyai cas yang mencukupi.
Sambungan hos: Verify the air hose is securely connected to both the device and the tire valve.
Terlalu panas: If the compressor has been running for an extended period, it may have overheated. Allow it to cool down for 10-15 minutes before attempting to use it again.

8.3 Peranti Tidak Mengecas

kabel: Ensure the USB-C charging cable is not damaged and is properly connected.
Penyesuai kuasa: Verify the USB power adapter is functional and provides adequate power output.

9. Waranti dan Sokongan

Your Andeman jump starter is UL Certified, ensuring it meets stringent safety standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Andeman webtapak.

For further assistance, please contact Andeman customer support.