Reloop RP-7 Professional 7-inch Turntable System User Manual

pengenalan

Thank you for choosing the Reloop RP-7 Professional 7-inch Turntable System. This manual provides essential information for the safe and efficient use of your new turntable. Please read these instructions carefully before operating the device and retain them for future reference. The Reloop RP-7 is designed for both casual listeners of 7-inch vinyl and professional DJs, offering high-quality performance and precision for 45s culture.

Arahan Keselamatan

• Bekalan Kuasa: Connect the turntable only to an AC outlet with the specified voltage (230 Volts). Ensure the power cord is not damaged or pinched.
• Air dan Kelembapan: Jangan dedahkan unit kepada hujan, lembapan atau kelembapan berlebihan. Jangan letakkan objek yang diisi dengan cecair, seperti pasu, pada unit.
• Pengudaraan: Pastikan pengudaraan yang mencukupi di sekeliling unit. Jangan sekat bukaan pengudaraan.
• Sumber Haba: Jauhkan unit daripada sumber haba seperti radiator, daftar haba, dapur, atau radas lain (termasuk amppenghidup) yang menghasilkan haba.
• Pembersihan: Putuskan sambungan kord kuasa sebelum membersihkan. Gunakan kain kering sahaja.
• Servis: Jangan cuba servis produk ini sendiri. Rujuk semua perkhidmatan kepada pegawai perkhidmatan yang berkelayakan.
• penempatan: Place the turntable on a stable, level surface to prevent vibrations and ensure proper operation.

Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• Reloop RP-7 Professional 7-inch Turntable System
• RCA kabel
• Kabel Kuasa
• Slipmat
• Kaunter berat badan
• Headshell with cartridge (may vary by region/package)
• Manual Pengguna (dokumen ini)

Produk Selesaiview

The Reloop RP-7 is a professional 7-inch direct-drive DJ turntable system, specifically designed for 45s vinyl enthusiasts and DJs. It combines robust construction with advanced features for precise playback and scratching.

Depan view of the Reloop RP-7 Professional 7-inch Turntable System, showcasing the platter, tonearm, and controls.

Ciri-ciri Utama:

• High-Torque Direct-Drive Motor: Newly developed brushless DC motor with 2.5 kg/cm torque for reliable vinyl cueing and advanced scratching techniques.
• Precision Platter: Precision-machined, die-cast aluminum platter with finely tuned motor characteristics to minimize wow and flutter.
• Straight Copper Tonearm: Features internal rubber damping for superior vinyl tracking and minimal resonance.
• Height-Adjustable VTA Tonearm Base: Adapted from the RP-7000/8000 series for optimal tracking.
• Statically-Balanced Tonearm System: With hydraulic lift, eliminating the need for anti-skating.
• Universal Cartridge System Connection: Compatible with SME and headshell cartridges.
• Adjustable Tempo Range: ±8%, ±16%, or ±35% with a reset button.
• Multiple Playback Speeds: Supports 33 1/3, 45, and 78 RPM.
• Detachable LED Light: Freely rotatable aluminum LED light for clear visibility in low-light conditions.
• Recessed Connection Terminal: Offers flush integration into a DJ setup with reliable protection for sensitive ports.
• Switchable Phono/Line Outputs: Gold-plated connectors prevent reliance on dedicated phono inputs.

The RP-7 features a newly developed brushless DC motor providing 2.5 kg/cm of torque for powerful and precise performance.

Key technical features of the Reloop RP-7, including pitch ranges, speeds, VTA tonearm, low-noise power supply, and SME cartridge connection.

Persediaan

1. Membongkar dan Meletakkan:

• Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
• Place the turntable on a flat, stable, and vibration-free surface.

2. Platter Installation:

• Letakkan pinggan aluminium perlahan-lahan pada gelendong.
• Letakkan slipmat di atas pinggan.

3. Tonearm and Cartridge Setup:

• Attach your preferred headshell with cartridge to the tonearm.
• Mount the counterweight onto the rear of the tonearm and adjust it to achieve proper tracking force for your cartridge. Refer to your cartridge manufacturer's recommendations for specific tracking force.
• Adjust the Vertical Tracking Angle (VTA) using the height-adjustable tonearm base to ensure the tonearm is parallel to the record surface.

4. Connecting to Audio System:

• Connect the supplied RCA cable from the turntable's output to your mixer or amplebih hidup.
• The RP-7 features switchable phono/line outputs. Ensure the switch on the rear of the turntable is set correctly (PHONO for phono inputs, LINE for line inputs).
• Connect the ground wire from the turntable to the ground terminal on your mixer or amppenggalak untuk meminimumkan dengungan.

belakang view of the Reloop RP-7, illustrating the recessed RCA and power connection terminals.

5. Sambungan Kuasa:

• Connect the power cable to the turntable and then to a suitable 230V AC power outlet.

Arahan Operasi

1. Menghidupkan/Mematikan:

• Turn the power knob clockwise to power on the unit. The LED will illuminate.
• Turn the power knob counter-clockwise to power off the unit.

2. Selecting Playback Speed:

• Tekan ke 33, 45, atau 78 RPM buttons to select the desired playback speed for your vinyl record. The corresponding LED will light up.

3. Starting/Stopping Playback:

• Letakkan rekod di atas pinggan.
• Tekan ke MULA/BERHENTI button to begin platter rotation.
• Lift the tonearm using the cue lever, position it over the desired track, and gently lower it onto the record.
• To stop, lift the tonearm, return it to the tonearm rest, and press the MULA/BERHENTI butang.

4. Pitch Adjustment:

• Use the pitch fader to adjust the playback speed within ±8%, ±16%, or ±35% ranges.
• Tekan ke TETAP SEMULA button to instantly return the platter speed to 0% pitch adjustment.

5. Menggunakan Lampu LED:

• Insert the detachable aluminum LED light into its designated port for improved visibility of the vinyl, especially in dimly lit environments.

The Reloop RP-7 provides excellent tracking accuracy and minimal resonances, crucial for both listening and DJ performance.

Penyelenggaraan

1. Membersihkan Unit:

• Sentiasa putuskan sambungan kuasa sebelum membersihkan.
• Use a soft, dry cloth to wipe the surface of the turntable. Do not use abrasive cleaners, waxes, or solvents.
• For the platter, use a slightly damp kain jika perlu, kemudian keringkan dengan teliti.

2. Penjagaan Stilus:

• Bersihkan stylus secara berkala menggunakan berus lembut yang direka untuk membersihkan stylus, berus perlahan-lahan dari belakang ke hadapan.
• Replace the stylus when it shows signs of wear (typically after 500-1000 hours of playback) to prevent damage to your records.

3. Record Care:

• Keep your records clean and free of dust. Use a carbon fiber brush before each play.
• Simpan rekod secara menegak dalam lengan bajunya untuk mengelakkan meledingkan.

Menyelesaikan masalah

If you encounter issues with your Reloop RP-7, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Reloop customer support.

Spesifikasi

Waranti dan Sokongan

Reloop products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Reloop website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Reloop customer service through their official channels.

Anda boleh mendapatkan lebih banyak maklumat dan sumber sokongan di Reloop Store on Amazon or the official Reloop webtapak.