1. Pengenalan
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.
Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).
2. Persediaan
Follow these steps to set up your RGBlink NDI PTZ Camera Controller.
2.1 Membongkar dan Pemeriksaan Awal
- Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
- Pastikan semua barang yang disenaraikan dalam senarai pembungkusan ada.
- Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.
2.2 Menyambungkan Pengawal
The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.
- Kuasa Ethernet (PoE): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
- Penyesuai Kuasa Luaran: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
- Sambungan Kamera:
- Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
- Serial Control: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.
Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.
Imej 2.2: Cthample connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.
Image 2.3: Diagram illustrating IP camera connections via a network switch.
2.3 Konfigurasi Rangkaian
For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.
- Access the controller's web antara muka dengan memasukkan alamat IPnya ke dalam a web browser. (Refer to the device's display or network tools to find the IP address).
- The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
- dalam web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.
Image 2.4: NDI|HX camera search and control interface on the controller.
3. Operasi
This section details the operational functions of the RGBlink NDI PTZ Camera Controller.
3.1 Berakhirview daripada Kawalan
The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.
Image 3.1: The controller's 3.49-inch LCD display.
Imej 3.2: Terperinci view of the 3D joystick and multi-function knobs.
Image 3.3: Layout of the controller's buttons and numeric keypad area.
3.2 Pemilihan Kamera
- Butang Pilih Pantas: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
- Papan kekunci angka: For cameras beyond the quick select buttons (up to 255), press the ID CAM button, then enter the camera number using the numeric keypad, and press MASUK.
Image 3.4: The controller's ability to manage multiple cameras.
3.3 Kawalan PTZ
- joystick: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
- Tombol Kelajuan PT: Adjusts the gimbal movement speed for pan and tilt.
- Zoom Knob: Provides precise zoom control, especially useful in preview mod.
3.4 Image Parameter Adjustment
- IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
- R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
- FOCUS Button: Tekan ke AUTO FOKUS button to switch the camera to auto focus mode.
- EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
- BACKLIGHT Button: Toggles the camera's backlight mode.
- WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
- ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.
Image 3.5: Functions of buttons and knobs on the left side of the controller.
Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.
3.5 Pratetap
- SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press MASUK untuk menyelamatkan. Tekan ESC untuk keluar.
- CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press MASUK to recall. Press ESC untuk keluar.
- The controller supports saving and recalling up to 255 presets per camera.
3.6 Menu Navigasi
- Butang MENU: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), MASUK confirms selections, and ESC acts as a back button.
4. Penyelenggaraan
Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.
4.1 Pembersihan
- Use a soft, dry cloth to clean the exterior of the controller.
- Untuk kotoran degil, sedikit dampbilas kain dengan air atau larutan pembersih yang lembut dan tidak kasar.
- Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
- Ensure no liquids enter the device through openings or ports.
4.2 Penyimpanan
- When not in use for extended periods, store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Lindungi peranti daripada habuk dan kelembapan.
5. Penyelesaian masalah
Bahagian ini menyediakan penyelesaian kepada isu biasa yang mungkin anda hadapi.
5.1 Tiada Kuasa
- Semak Sumber Kuasa: Ensure the power adapter is securely connected to both the controller and a working power outlet.
- Semakan PoE: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
- Integriti Kabel: Inspect the power cable and Ethernet cable for any damage.
5.2 Cannot Control Camera
- Kesambungan Rangkaian: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
- Tidak Padan Protokol: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
- ID Kamera: Ensure the correct camera ID is selected on the controller.
- Kelayakan Log Masuk: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web antara muka.
- Sambungan Bersiri: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
- Perisian tegar: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support webtapak untuk kemas kini.
5.3 Isu Paparan LCD
- Tiada Paparan: Pastikan pengawal dihidupkan.
- Paparan Malap: Check if there are any brightness settings on the controller that can be adjusted.
6. Spesifikasi
| Ciri | Perincian |
|---|---|
| Model | RGBBKT |
| Dimensi (L x W x H) | 11.4 x 7.8 x 5.9 inci (lebih kurang 290 x 200 x 150 mm) |
| Berat badan | 2.2 paun (lebih kurang 1 kg) |
| Paparan | 3.49" LCD |
| Protokol Kawalan | VISCA over IP, ONVIF v2.42, NDI v5.5, Pelco-D/P |
| Antara muka | RS232, RS422, RS485, RJ45 Ethernet (PoE) |
| Camera Capacity | Up to 255 PTZ cameras |
| Input Kuasa | PoE or DC 12V (external adapter) |
| Kayu bedik | High-precision Hall sensor 3D joystick |
Image 6.1: Controller dimensions and typical usage environments.
Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.
7. Demonstrasi Video Produk
Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.
Video 7.1: Official demonstration of the RGBlink PTZ Camera Controller Joystick, showcasing multi-camera control and key features.
8. Waranti dan Sokongan
For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official webtapak.
- Pengeluar: Xiamen RGBlink Science & Technology Co.,Ltd.
- rasmi Webtapak: www.rgblink.com (Nota: Ini ialah pemegang tempat URL, sila rujuk pembungkusan produk atau dokumentasi rasmi anda untuk sokongan yang betul webtapak.)
- Maklumat Hubungan: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.
