VANPO 1/2-Inch Digital Torque Wrench Instruction Manual

pengenalan

The VANPO 1/2-Inch Digital Torque Wrench provides precise torque control for various mechanical applications. This manual outlines the proper setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.

Ciri-ciri Utama:

• Precise Accuracy: Delivers reliable torque control with ±2% accuracy, reducing over-tightening and fastener damage.
• Clear Torque Feedback: Features a large backlit LCD display, audible alerts, LED indicators, and vibration feedback for clear confirmation when preset torque is reached.
• Durable & Bidirectional: Built for repeated use in automotive environments, supporting both clockwise and counterclockwise operation.
• Easy & Efficient Operation: Supports Peak and Track modes, with preset torque values, and a tool-free, quick-access battery compartment.
• Aplikasi luas: Suitable for vehicle maintenance, home repair, workshop projects, and industrial machinery.

Persediaan

1. Pemasangan Bateri

The torque wrench requires two AA batteries (included). To install:

1. Unscrew the battery cap at the end of the handle.
2. Insert two AA batteries, ensuring correct polarity (negative side down, positive side up).
3. Gantikan penutup bateri dan ketatkan dengan selamat.

Figure 1: Battery installation and ergonomic handle design.

2. Memasang Aksesori

The wrench comes with a 125mm extension bar and a 1/2" to 3/8" adapter.

• To attach an extension or adapter, press the quick-release button on the ratchet head and insert the accessory.
• Ensure the accessory is securely locked in place before use.

Figure 2: Quick-release button for attaching sockets and accessories.

Arahan Operasi

1. Power On/Off and Unit Selection

• Tekan ke HIDUP/MATI button to power on the wrench.
• Tekan ke A/S button to cycle through measurement units: ft-lb, in-lb, Nm, kg-cm.

Figure 3: LCD display showing selectable measurement units.

2. Setting Target Torque Value

• Gunakan Up dan Bawah arrow buttons to adjust the target torque value.
• The LCD will display the current setting.

3. Operating Modes (Peak & Track)

Tekan ke P / T button to switch between Peak and Track modes.

• Mod Trek: Displays real-time torque values as force is applied.
• Mod Puncak: Captures and displays the maximum torque value achieved during the tightening process.

Figure 4: Explanation of Track Mode and Peak Mode.

4. Memohon Tork

Apply force to the wrench. As you approach the preset torque value, the wrench will provide triple feedback:

• Makluman Boleh Didengar: A buzzer will sound.
• Penunjuk LED: Lights on the handle will illuminate (green for 85-90% of target, red for 100%).
• Maklum Balas Getaran: The handle will vibrate.

Figure 5: Triple feedback system for reaching target torque.

5. Fungsi Memori

The wrench can store multiple preset torque values. Use the M button to access and save memory settings.

6. Fungsi Kunci Skrin

Tekan lama M button for 3 seconds to lock the screen and buttons, preventing accidental changes during operation. Long press M sekali lagi untuk membuka kunci.

Penyelenggaraan

• Pembersihan: Wipe the wrench with a clean, dry cloth after each use. Do not use abrasive cleaners or solvents.
• Storan: Store the torque wrench in its protective case in a dry, cool place away from direct sunlight and extreme temperatures.
• Penggantian Bateri: Gantikan bateri apabila penunjuk bateri rendah muncul pada LCD.
• Penentukuran: For optimal accuracy, it is recommended to have the torque wrench calibrated periodically by a certified service center.

Menyelesaikan masalah

Spesifikasi

Waranti & Sokongan

This VANPO Digital Torque Wrench is backed by a 36-month manufacturer warranty. For warranty claims, technical support, or service inquiries, please refer to the contact information provided with your product packaging or visit the official VANPO webtapak.

A Certificate of Calibration Report is included with your product, detailing the device's accuracy at the time of manufacture.

Video Produk