Akicon Bathroom Exhaust Fan with Humidity Sensor and RGB Light

1. Maklumat Keselamatan Penting

Read all instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Always disconnect power at the circuit breaker before servicing or cleaning the unit.
• Pemasangan hendaklah dilakukan oleh juruelektrik yang berkelayakan mengikut semua kod elektrik tempatan dan kebangsaan.
• Do not use this fan with any solid-state speed control device unless specifically approved for use with this model.
• Pastikan pembumian yang betul untuk mengurangkan risiko kejutan elektrik.
• Unit ini direka bentuk untuk kegunaan pengudaraan umum sahaja. Jangan gunakan untuk mengeluarkan bahan dan wap berbahaya atau letupan.

2. Kandungan Pakej

Carefully unpack the fan and check for any shipping damage. Ensure all parts are present before discarding packaging materials. If any parts are missing or damaged, contact Akicon customer support.

• Exhaust Fan Housing
• Grille with LED Light and Humidity Sensor
• Alat Kawalan Jauh
• Templat Potongan Dinding Kering
• Hanger Bar/Suspension Brackets (for attic installation)
• Skru Pemasangan
• Manual Arahan

3. Spesifikasi

4. Pemasangan

4.1 Pemeriksaan Pra-Pemasangan

Before beginning installation, ensure the following:

• Verify that your soffit or attic has sufficient space for the fan housing. The required opening size is 9-1/4" x 9-1/4" and a minimum soffit/attic height of 7-3/4".
• Matikan kuasa ke kawasan pemasangan di pemutus litar.

Imej: Pre-installation diagram illustrating the necessary ceiling opening dimensions (9-1/4" x 9-1/4") and minimum attic/soffit height (7-3/4") for proper fan installation.

4.2 Ceiling Opening

1. Use the provided drywall cutout template to mark the ceiling opening.
2. Carefully cut the 9-1/4" x 9-1/4" opening in the ceiling.

4.3 Pendawaian

Connect the electrical wires according to the label on the wires. Ensure black wire connects to black, white to white, and ground to ground. A neutral wire is required for operation.

Imej: Detailed wiring diagram showing connections for the fan, including ground, neutral, and live wires to a junction box. This diagram is crucial for correct electrical installation.

4.4 Pilihan Pemasangan

This fan supports multiple installation methods:

Option A: Bracket Attic Installation

This method is used when attic access is available and joists are present for mounting.

1. Insert suspension brackets (CC) into the tabs on the fan housing and then slide suspension brackets (DD) into suspension brackets (CC).
2. Screw the housing into the joists using appropriate screws.
3. Tighten the screws until the fan housing is firmly secured to the brackets.

Option B: Bracket-Free Attic Installation

This method is used when attic access is available and the fan can be directly mounted to joists without additional brackets.

1. Screw the fan housing directly into the joist using appropriate screws.
2. Ensure the housing is securely fastened to prevent vibration.

Option C: No Attic Installation

This method is suitable when attic access is not available, allowing installation from below the ceiling.

1. Remove the screws securing the motor to the housing, and unplug the wires connecting the motor to the housing.
2. Remove the fan motor assembly from the housing.
3. After connecting the ventilation duct, send the housing into the ceiling opening.
4. Connect the wires correctly according to the label on the wires (black to black, white to white, ground to ground).
5. Secure the housing to the joist from below.
6. Reinstall the motor back into the housing and connect the plugs.
7. Pasang gril.

4.5 Pemasangan Gril

Once the fan housing is secured and wired, install the grille:

1. Connect the light and sensor wires from the grille to the corresponding connectors in the fan housing.
2. Align the grille mounting springs with the slots in the fan housing.
3. Push the grille firmly into place until it is flush with the ceiling.

5. Operasi

The Akicon Bathroom Exhaust Fan is operated using the included remote control. Ensure the remote has working batteries.

Imej: Remote control layout with labeled buttons for power, brightness, light on/off, fan on/off, humidity sensor, fan timers (15/30 min), night light, RGB on/off, RGB mode switch, and color temperature selection (Warm, Day, Cold Light).

5.1 Fungsi Asas

• HIDUP/MATI Kuasa: Press the 'ON' or 'OFF' button to turn the fan and light on or off.
• Kipas HIDUP/MATI: Press the fan icon button to control the fan independently.
• Lampu HIDUP/MATI: Press the light bulb icon button to control the light independently.

5.2 Penderia Kelembapan

The fan features an integrated humidity sensor for automatic operation.

• Pengaktifan: Press the 'Humidity Sensor' button on the remote. The blue indicator light on the fan will flash during humidity detection mode.
• Operasi automatik: When indoor humidity exceeds 60% RH, the blue light illuminates steadily, and the fan activates automatically to reduce moisture.
• Penyahaktifan: The fan will continue to operate until the humidity drops below 60% RH, then it will turn off.

Imej: Visual explanation of the humidity sensor's function. It shows the fan activating when humidity is above 60% RH and remaining off when below 60% RH, with air circulation arrows.

5.3 Fungsi Pencahayaan

The fan includes versatile lighting options:

• LED boleh malap: Adjust brightness using the '+' and '-' buttons.
• 3 Suhu Warna: Select between 2700K (Warm Light), 4000K (Day Light), and 5000K (Cold Light) using the dedicated buttons.
• Pencahayaan Dinamik RGB: Press 'RGB ON/OFF' to activate. Use 'RGB Mode Switch' to cycle through Static, Cycle, and Flow modes.
• Lampu malam: Press the 'Night Light ON/OFF' button to activate a soft 3000K nightlight.

Imej: Depiction of the three RGB dynamic light modes: Static (four solid single colors), Cycle (smooth transitions through colors), and Flow (flowing chase light effect). This image helps visualize the different lighting options.

Imej: Visual representation of the 3 CCT (Correlated Color Temperature) dimmable LED light settings (3000K, 4000K, 5000K) and the night light feature, demonstrating the adjustable brightness and color options.

5.4 Fungsi Pemasa

Set the fan to operate for a specific duration:

• Pemasa 15 Minit: Press the '15 min' button.
• Pemasa 30 Minit: Press the '30 min' button.

Imej: Illustration of the fan's timer function, showing the fan turning on and then automatically shutting off after a set period (15 or 30 minutes), useful for clearing steam after a shower.

6. Penyelenggaraan

Penyelenggaraan berkala memastikan prestasi optimum dan jangka hayat kipas ekzos anda.

6.1 Membersihkan Gril dan Penutup Lampu

1. Putuskan Kuasa: Sentiasa matikan kuasa pada pemutus litar sebelum membersihkan.
2. Keluarkan Grille: Gently pull down the grille to disengage the mounting springs.
3. Bersih: Wipe the grille and light cover with a soft, damp cloth. A mild, non-abrasive detergent can be used if necessary. Do not use harsh chemicals or abrasive cleaners.
4. kering: Ensure all parts are completely dry before reattaching.
5. Pasang semula Gril: Push the grille back into place until the springs engage securely.

6.2 Cleaning the Fan Motor and Housing

Periodically, the fan motor and housing may require cleaning to remove dust and debris.

1. Putuskan Kuasa: Matikan kuasa pada pemutus litar.
2. Keluarkan Grille: Remove the grille as described above.
3. Akses Motor: Depending on your installation type, you may need to carefully remove the motor assembly from the housing. Refer to the installation section for guidance on motor removal.
4. Bersih: Use a vacuum cleaner with a brush attachment or a soft brush to remove dust from the fan blades, motor, and interior of the housing. Do not use water or liquids directly on electrical components.
5. Pasang semula: Reinstall the motor assembly and grille, ensuring all connections are secure.
6. Pulihkan Kuasa: Hidupkan semula kuasa pada pemutus litar.

7. Penyelesaian masalah

If you experience issues with your Akicon Bathroom Exhaust Fan, refer to the following troubleshooting guide:

If the problem persists after trying these solutions, please contact Akicon customer support.

8. Waranti dan Sokongan

Akicon products are manufactured to high-quality standards and are warranted to be free from defects in materials and workmanship. For specific warranty details, duration, and terms, please refer to the warranty card included in your package or visit the official Akicon webtapak.

For technical assistance, troubleshooting not covered in this manual, or to report missing/damaged parts, please contact Akicon customer support:

• e-mel: Refer to warranty card or Akicon webtapak.
• telefon: Refer to warranty card or Akicon webtapak.
• Webtapak: Akicon Official Store