POXURIO Portable Inverter Generator 2450W - Instruction Manual

1. Pengenalan

This manual provides essential information for the safe operation, maintenance, and troubleshooting of your POXURIO Portable Inverter Generator 2450W. Please read this manual thoroughly before operating the generator to ensure proper use and to prevent injury or damage.

1.1 Maklumat Keselamatan

AMARAN: Operating this generator can produce carbon monoxide, an odorless, colorless gas. Carbon monoxide can cause nausea, fainting, or death. Always operate the generator outdoors in a well-ventilated area, far from windows, doors, and vents.

• Never operate the generator indoors, in a garage, or in any enclosed space.
• Jauhkan kanak-kanak dan haiwan peliharaan daripada penjana semasa operasi.
• Fuel is highly flammable. Always refuel in a well-ventilated area with the engine off and cool.
• Jangan sambungkan penjana terus ke sistem elektrik bangunan tanpa suis pemindahan yang dipasang oleh juruelektrik yang berkelayakan.
• Pakai peralatan pelindung diri (PPE) yang sesuai semasa mengendalikan bahan api atau melakukan penyelenggaraan.

1.2 Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• POXURIO Portable Inverter Generator 2450W
• Manual Pemilik
• Perengkuh Palam Pencucuh
• Corong Minyak
• Kabel Pengecas DC
• Hos Propana dengan Pengatur
• Handles (for assembly)

Image 1: POXURIO Portable Inverter Generator 2450W. This image shows the overall design of the generator, highlighting its compact and portable nature with a yellow casing and black accents.

2. Persediaan

2.1 Unpacking and Handle Assembly

Carefully remove the generator from its packaging. Attach the included handles using the provided hardware. Ensure all bolts are tightened securely.

2.2 Menambah Minyak Enjin

The generator is shipped without engine oil. It is crucial to add the correct amount and type of oil before first use.

1. Letakkan penjana pada permukaan yang rata.
2. Tanggalkan penutup isi minyak/dipstick.
3. Using the provided oil funnel, slowly add 0.4 liters (approximately 13.5 fl oz) of 10W-30 engine oil. Do not overfill.
4. Reinsert the dipstick and check the oil level. It should be at the top of the dipstick's crosshatch pattern.
5. Pasang semula penutup isi minyak dengan selamat.

Jenis Minyak yang Disyorkan: SAE 10W-30 for general use. Refer to the specifications for temperature-specific recommendations.

2.3 Menambah Bahan Api (Petrol atau Propana)

This generator is dual fuel capable. Choose either gasoline or propane for operation.

2.3.1 Gasoline Fueling

• Pastikan penjana dimatikan dan sejuk.
• Alihkan penjana ke kawasan luar yang mempunyai pengudaraan yang baik.
• Buka penutup penutup minyak.
• Fill the fuel tank with fresh, unleaded gasoline (minimum 87 octane) up to the fill neck, but do not overfill. The tank capacity is 6 liters.
• Pasang semula penutup bahan api dengan kemas. Lap sebarang tumpahan bahan api dengan segera.

2.3.2 Propane (LPG) Connection

• Ensure the generator is off.
• Connect the propane hose regulator to a standard propane tank.
• Connect the other end of the hose to the generator's LPG inlet.
• Ketatkan semua sambungan dengan selamat untuk mengelakkan kebocoran.
• Perlahan-lahan buka injap pada tangki propana.

3. Arahan Operasi

Always ensure the generator is on a level surface and away from any obstructions.

3.1.1 Memulakan dengan Petrol

1. Pastikan injap bahan api berada dalam kedudukan "ON".
2. Move the choke lever to the "CHOKE" position.
3. Putar suis enjin ke kedudukan "ON".
4. Tarik pemegang starter sentakan dengan kuat dan lancar sehingga enjin dihidupkan.
5. Sebaik sahaja enjin dihidupkan, perlahan-lahan gerakkan tuil cok ke kedudukan "RUN".
6. Benarkan penjana memanaskan badan selama beberapa minit sebelum menyambungkan beban elektrik.

3.1.2 Starting with Propane (LPG)

1. Pastikan injap tangki propana terbuka.
2. Ensure the gasoline fuel valve is in the "OFF" position.
3. Move the choke lever to the "CHOKE" position.
4. Putar suis enjin ke kedudukan "ON".
5. Pull the recoil starter handle firmly and smoothly until the engine starts. Propane may require a few more pulls than gasoline.
6. Sebaik sahaja enjin dihidupkan, perlahan-lahan gerakkan tuil cok ke kedudukan "RUN".
7. Benarkan penjana memanaskan badan selama beberapa minit sebelum menyambungkan beban elektrik.

3.2 Menghentikan Penjana

1. Putuskan sambungan semua beban elektrik daripada penjana.
2. Benarkan penjana berjalan selama beberapa minit tanpa beban menjadi sejuk.
3. If operating on gasoline, turn the fuel valve to the "OFF" position and let the engine run until it stalls from fuel starvation. This helps prevent carburetor issues.
4. If operating on propane, close the valve on the propane tank. Let the engine run until it stalls.
5. Putar suis enjin ke kedudukan "OFF".

3.3 Operasi Mod Eko

The Eco Mode switch, when engaged, allows the engine to automatically adjust its speed to match the electrical load. This reduces fuel consumption and noise levels when less power is required. For maximum power output, disengage Eco Mode.

3.4 Menyambungkan Beban Elektrik

• Ensure the generator is running stably before connecting appliances.
• Connect appliances one at a time, starting with the highest wattage peranti.
• Jangan melebihi had kuasa larian penjanatage (2450W peak, consult specifications for continuous).
• Use only grounded extension cords in good condition.

4. Penyelenggaraan

Regular maintenance is essential for the longevity and reliable operation of your generator. Always perform maintenance with the engine off and cool, and the spark plug cap disconnected.

4.1 Jadual Penyelenggaraan

4.2 Prosedur Tukar Minyak

1. Hidupkan enjin selama beberapa minit untuk memanaskan minyak, kemudian matikan.
2. Letakkan dulang longkang di bawah palam longkang minyak.
3. Tanggalkan palam pembuangan minyak dan penutup isian minyak/batang celup untuk membolehkan minyak mengalir sepenuhnya.
4. Reinstall the oil drain plug and tighten it.
5. Refill with the recommended amount and type of new engine oil (0.4 liters of 10W-30).
6. Check the oil level and securely replace the oil fill cap.

4.3 Pembersihan Penapis Udara

1. Tanggalkan penutup penapis udara.
2. Remove the foam air filter element.
3. Wash the filter element in warm, soapy water, then rinse thoroughly.
4. Squeeze out excess water and allow it to air dry completely.
5. Lightly apply clean engine oil to the filter, then squeeze out excess oil.
6. Reinstall the air filter element and cover.

4.4 Pemeriksaan Palam Pencucuh

1. Tanggalkan penutup palam pencucuh.
2. Gunakan sepana palam pencucuh yang disediakan untuk menanggalkan palam pencucuh.
3. Inspect the spark plug for carbon buildup or wear. Clean with a wire brush or replace if necessary.
4. Check the spark plug gap (refer to specifications for correct gap).
5. Reinstall the spark plug and tighten it. Reattach the spark plug cap.

4.5 Penyimpanan

For long-term storage (over 30 days), proper preparation is crucial:

• Drain the fuel tank and carburetor of all gasoline, or add a fuel stabilizer.
• Tukar minyak enjin.
• Remove the spark plug and pour a teaspoon of engine oil into the cylinder. Pull the recoil starter a few times to distribute the oil, then reinstall the spark plug.
• Bersihkan bahagian luar penjana.
• Simpan di kawasan yang bersih, kering dan mempunyai pengudaraan yang baik.

5. Penyelesaian masalah

This section provides solutions to common operational issues. If you encounter a problem not listed here, contact customer support.

6. Spesifikasi

7. Waranti dan Sokongan

POXURIO products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official POXURIO webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.

For technical assistance, parts, or service, please contact POXURIO customer support. Contact information can typically be found on the product packaging or the brand's official webtapak.

Nota: Unauthorized modifications or use of non-genuine parts may void your warranty.