BLACK+DECKER GL350L 350W Corded String Trimmer User Manual

1. Pengenalan

Thank you for choosing the BLACK+DECKER GL350L 350W Corded String Trimmer. This manual provides essential information for the safe and efficient operation, assembly, maintenance, and troubleshooting of your new string trimmer. Please read these instructions carefully before use and retain them for future reference.

The GL350L is designed for light trimming and maintenance of weeds and grass in small gardens. It features a powerful 350W motor, a 23 cm (9") cutting width, and a no-load speed of 12000 RPM, ensuring efficient performance.

2. Arahan Keselamatan

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using power tools. Familiarize yourself with all controls and proper usage.

2.1 Keselamatan Am

• Baca semua arahan: Before operating the tool, read and understand all safety warnings and instructions.
• Pastikan kawasan kerja bersih: Ensure the area is free from debris, children, and bystanders.
• Berpakaian yang sesuai: Wear long trousers, sturdy footwear, and eye protection. Avoid loose clothing or jewelry that could get caught in moving parts.
• Elakkan persekitaran berbahaya: Do not use the trimmer in wet or damp syarat.
• Periksa alat: Before each use, check for damaged parts, loose fasteners, or any other condition that may affect its safe operation.

2.2 Keselamatan Elektrik

• Sumber kuasa: Pastikan sumber kuasa sepadan dengan voltage specified on the tool's rating plate (220-240V).
• Kord sambungan: Use only outdoor-rated extension cords that are in good condition and suitable for the tool's power rating.
• Avoid damage to cord: Do not carry the tool by the cord or yank it to disconnect from the outlet. Keep the cord away from heat, oil, sharp edges, or moving parts.
• Pengganggu Litar Sesar Tanah (GFCI): Always use a GFCI when operating the trimmer outdoors.

3. Produk Lebihview dan Pengenalan Bahagian

Familiarize yourself with the components of your BLACK+DECKER GL350L string trimmer before operation.

Imej: Berakhirview of the GL350L String Trimmer with key components labeled.

• Pemegang Utama: Designed for comfortable grip during extended use.
• Suis Pencetus: Activates and deactivates the trimmer.
• Penahan Kord: Secures the power cord in place to prevent accidental disconnection.
• Pivoting Button: Allows adjustment of the trimmer head angle for various cutting tasks.
• Pemegang Bantu: Provides additional control and comfort, especially during two-handed operation.
• Upper Shaft: The upper section of the trimmer's main body.
• Lower Shaft: The lower section of the trimmer's main body, connecting to the trimmer head.
• Pengawal Keselamatan: Protects the user from flying debris during operation.
• Garis Pemotongan: The nylon line used for cutting grass and weeds.
• Cut-Off Blade: Automatically trims the cutting line to the correct length.
• Spool Cap: Protects the trimmer line spool.
• Spool Cover Lock Button: Prevents the line from becoming tangled.
• Bump Head: Mechanism to advance the cutting line.
• Tunjang: Holds the cutting line for smooth and continuous trimming.

4. Persediaan

Although the GL350L requires minimal assembly, ensure all components are correctly attached before first use.

4.1 Attaching the Safety Guard

1. Align the safety guard with the slots on the trimmer head.
2. Push the guard firmly until it clicks into place. Ensure it is securely fastened and does not wobble.

Imej: Components of the GL350L String Trimmer before assembly, showing the safety guard.

4.2 Memasang Pemegang Bantu

1. Slide the auxiliary handle onto the upper shaft.
2. Adjust the handle to a comfortable position for your height and working posture.
3. Tighten the handle securely using the pivoting button or locking mechanism provided.

Imej: Detail of the auxiliary handle attachment point.

4.3 Menyambung ke Kuasa

1. Insert the power cord into the cord retainer on the main handle. This prevents accidental unplugging.
2. Connect the trimmer's power cord to a suitable outdoor-rated extension cord.
3. Plug the extension cord into a grounded 220-240V outlet protected by a GFCI.

5. Arahan Operasi

Follow these guidelines for effective and safe trimming.

5.1 Bermula dan Berhenti

• Untuk mula: Hold the trimmer firmly with both hands. Press the trigger switch on the main handle.
• Untuk berhenti: Lepaskan suis pencetus.

5.2 Teknik Menggunting

For optimal results and to prevent damage to your lawn and the trimmer, use the following techniques:

• Berbilang Pas: It is ideal to cut grass in multiple passes, especially for longer grass. This prevents discoloration of the lawn (brown grass) and reduces the load on the 350W motor, preventing overheating and damage.
• 1/3rd Rule: In each pass, cut no more than 1/3rd of the total grass length.
• Memotong Tinggi: For grass less than 5 cm, a single pass is sufficient. For grass between 5 cm and 10 cm, trim in one pass. For grass between 10 cm and 15 cm, trim in one pass. Refer to the manual for specific height adjustment instructions if applicable.

Imej: Visual guide for effective grass trimming, emphasizing multiple passes and cutting height.

5.3 Advancing the Cutting Line (Bump Feed)

The GL350L features a bump feed system to advance the cutting line.

1. While the trimmer is running, gently tap the bump head on a firm, flat surface (e.g., the ground).
2. The cutting line will automatically extend. The cut-off blade on the safety guard will trim the line to the correct length.

Imej: A user demonstrating the use of the string trimmer for garden maintenance.

6. Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your trimmer.

6.1 Pembersihan

• Putuskan Kuasa: Always unplug the trimmer from the power source before cleaning.
• Perumahan Bersih: Lap bahagian luar perapi dengan iklanamp kain. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
• Kosongkan Serpihan: Remove any grass clippings or debris from the safety guard, trimmer head, and ventilation openings. Use a small brush or compressed air if necessary.

6.2 Replacing the Cutting Line

When the cutting line runs out or becomes too short, it needs to be replaced.

1. Putuskan Kuasa: Ensure the trimmer is unplugged.
2. Remove Spool Cap: Press the spool cover lock button and remove the spool cap.
3. Tanggalkan Kili Lama: Take out the empty or damaged spool.
4. Pasang Kili Baharu: Place a new BLACK+DECKER replacement spool (or correctly wound line of the specified diameter) into the trimmer head. Ensure the line is threaded through the eyelets.
5. Reattach Spool Cap: Securely reattach the spool cap.

Imej: Terperinci view of the trimmer head components, including the spool and cap.

6.3 Penyimpanan

• Simpan perapi di tempat yang kering dan selamat, dari jangkauan kanak-kanak.
• Lindungi kord kuasa daripada kerosakan semasa penyimpanan.

7. Penyelesaian masalah

Before attempting any repairs, always disconnect the trimmer from the power supply.

8. Spesifikasi

Technical details for the BLACK+DECKER GL350L Corded String Trimmer.

Imej: Visual summary of the GL350L's main technical specifications.

9. Waranti dan Sokongan

BLACK+DECKER is committed to providing quality products and support.

9.1 Maklumat Waranti

This product comes with a standard manufacturer's warranty. An optional 1-year extended warranty by Onsitego may also be available. For detailed warranty terms and conditions, please refer to the warranty card included with your product or contact customer support.

9.2 Sokongan Pelanggan

For sales, after-sales support, original parts, or any information regarding your BLACK+DECKER GL350L string trimmer, please contact us through the following channels:

Imej: BLACK+DECKER Total Care contact details for support.

• telefon: 1800-203-0644 (Monday - Saturday, 09:00 AM - 06:00 PM IST, except government holidays)
• e-mel: SBD-CUSTOMERCOMMUNICATIONS@SBDINC.COM
• WhatsApp: +91 96060 55835 (Scan the QR code in the image or click the link to contact us)
• Pusat Servis Dibenarkan: Over 500+ service centers available.

Manufacturer Contact Information: Stanley Black & Decker India Pvt Limited, GAT NO. 135, 137 & 157, PO Mahalunge Talukha - Khed Pune 410501, India.