THIKPO TK063 Digital Brake Fluid Tester User Manual

1. Pengenalan

The THIKPO TK063 Digital Brake Fluid Tester is a high-sensitivity device designed for accurately measuring the moisture content in various types of brake fluid. This manual provides essential information for the safe and effective use of your tester, including setup, operation, maintenance, and troubleshooting.

The TK063 is compatible with DOT3, DOT4, DOT5.1, EVN4, and EVN6 brake fluid types.

2. Maklumat Keselamatan

Sila baca semua amaran dan arahan keselamatan dengan teliti sebelum menggunakan produk ini. Kegagalan mematuhi arahan ini boleh mengakibatkan kecederaan atau kerosakan pada peranti.

Always wear appropriate personal protective equipment, such as gloves and eye protection, when handling brake fluid.
Cecair brek bersifat menghakis. Elakkan sentuhan dengan kulit, mata dan permukaan yang dicat. Sekiranya terkena, bilas segera dengan air yang banyak.
Keep the device and brake fluid out of reach of children and pets.
Do not immerse the main body of the tester in any liquid. Only the flexible probe is designed for immersion.
Ensure the probe is clean and dry before and after each use to prevent contamination and ensure accurate readings.
Dispose of used brake fluid and contaminated cleaning materials according to local environmental regulations.

3. Produk Lebihview dan Komponen

The THIKPO TK063 Digital Brake Fluid Tester is designed for ease of use and accurate results. Familiarize yourself with its components:

Unit Utama: Meletakkan paparan LCD, butang kawalan dan petak bateri.
Probe Fleksibel: A 10.35-inch (26.3 cm) corrosion-resistant zinc alloy probe for accessing brake fluid reservoirs.
Paparan LCD: Provides clear readings, fluid type selection, and moisture content levels with color-coded alerts.
Butang Kawalan: For power, fluid type selection, backlight adjustment, and buzzer control.
Pelabuhan Penentukuran: For manual fine-tuning of the sensor.

Apa yang ada di dalam Kotak:

1 x Brake Fluid Tester Main Unit
1 x Manual Pengguna (dokumen ini)
2 x AA High-quality batteries

THIKPO TK063 Digital Brake Fluid Tester with batteries — Image 1: THIKPO TK063 Digital Brake Fluid Tester and included AA batteries.

THIKPO TK063 Tester showing compatibility with DOT3, DOT4, DOT5.1, EVN4, EVN6 brake fluids — Image 2: The TK063 tester supports multiple brake fluid types including DOT3, DOT4, DOT5.1, EVN4, and EVN6.

4. Persediaan

4.1 Pemasangan Bateri

Cari petak bateri di belakang unit utama.
Buka penutup petak bateri.
Masukkan dua bateri AA, pastikan kekutuban (+/-) betul.
Tutup penutup petak bateri dengan selamat.

4.2 Hidupkan Kuasa Awal

Press and hold the power button (usually the central button with a power symbol) to turn on the device. The LCD display will illuminate.

5. Arahan Operasi

5.1 Hidupkan/Mati Kuasa

Untuk Menghidupkan: Press and hold the central power button.
Untuk Mematikan: Press and hold the central power button again. The device also features an auto-shutoff function after 5 minutes of inactivity to conserve battery life.

5.2 Fluid Type Selection

Before testing, select the correct brake fluid type:

With the device powered on, press the dedicated buttons for DOT3, DOT4, DOT5.1, EVN4, or EVN6 to cycle through the fluid types.
Ensure the selected fluid type on the display matches the brake fluid you are testing.

5.3 Prosedur Pengujian

Sediakan Probe: Ensure the flexible probe is clean and dry.
Immerse the Probe: Carefully immerse the metal tip of the flexible probe into the brake fluid reservoir. Ensure the probe tip is fully submerged in the fluid. The 10.35-inch flexible gooseneck hose allows easy access to narrow spaces.
Baca Keputusan: The LCD display will show the moisture content percentage within seconds.
Tafsir Bacaan: The display uses color-coded alerts for easy interpretation:
- Hijau (0%): Indicates good brake fluid quality.
- Yellow (1-2%): Indicates brake fluid should be replaced soon.
- Red (3-4%): Indicates brake fluid needs immediate replacement.
Penggera Buzzer: The device features a switchable buzzer alarm that activates for high moisture content (Red alert). Press the buzzer button to toggle it on or off.
Bersihkan Selepas Penggunaan: After each test, thoroughly clean the probe with a clean cloth to remove any brake fluid residue. Rinse with water if necessary, then dry completely.

THIKPO TK063 LCD display showing brake fluid quality readings — Image 3: The colorful LCD display provides clear readings of brake fluid moisture content, with visual indicators for good, normal, and bad quality.

THIKPO TK063 flexible probe for brake fluid testing — Image 4: The 10.35-inch 360° flexible probe is made of corrosion-resistant zinc alloy, designed for durability and easy access to brake fluid reservoirs.

5.4 Penentukuran Manual

The TK063 features a precision calibration port for maintaining laboratory-level accuracy over its lifespan. This compensates for potential sensor drift.

Locate the calibration port on the device (refer to the product diagram if available).
Using a standard screwdriver, carefully adjust the calibration screw as needed. Refer to the specific calibration procedure in the full manufacturer's guide for detailed steps, typically involving testing with known fluid samples.

5.5 Fungsi Pegangan Data

Press the 'Hold' button (if available, typically indicated by a 'H' or similar icon) to freeze the current reading on the display. Press it again to release.

5.6 Lampu Latar Boleh Laras

The LCD display backlight can be adjusted for optimal visibility in various lighting conditions. Press the backlight button (typically indicated by a sun icon) to cycle through brightness levels.

THIKPO TK063 showing various functions like power display, calibration, backlight, and buzzer — Imej 5: Selesaiview of the TK063's functions, including power display, calibration button, adjustable backlight, and switchable buzzer.

5.7 Video Demonstrasi Produk

Video 1: A demonstration of the THIKPO Brake Fluid Tester in use, showing its features and how it indicates brake fluid quality.

6. Penyelenggaraan

6.1 Membersihkan Probe

After each use, wipe the flexible probe thoroughly with a clean, lint-free cloth to remove any brake fluid residue. If necessary, rinse the probe tip with clean water and ensure it is completely dry before storage or next use. Do not use harsh chemicals or abrasive materials.

6.2 Penggantian Bateri

When the battery level indicator on the LCD display shows low power, replace the two AA batteries as described in Section 4.1. Remove batteries if the device will not be used for an extended period to prevent leakage.

6.3 Penyimpanan

Store the THIKPO TK063 in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent damage.

7. Penyelesaian masalah

Masalah	Kemungkinan Punca	Penyelesaian
Peranti tidak dihidupkan	Bateri mati atau tidak dipasang dengan betul	Periksa kekutuban bateri; ganti dengan bateri AA yang baru.
Bacaan tidak tepat	Probe not clean Incorrect fluid type selected Sensor hanyut	Clean the probe thoroughly. Ensure the correct brake fluid type is selected. Perform manual calibration (refer to Section 5.4).
Buzzer not sounding	Buzzer dimatikan	Press the buzzer button to turn it on.
Paparan malap atau berkelip	Low battery or backlight setting	Replace batteries; adjust backlight brightness.

8. Spesifikasi

model: TK063
Compatible Fluid Types: DOT3, DOT4, DOT5.1, EVN4, EVN6
Panjang Probe: 10.35 inci (26.3 cm)
Bahan Probe: Corrosion-resistant zinc alloy
Ketepatan: 0.1%
paparan: Colorful LCD with visual and audio alerts
Sumber Kuasa: 2 x bateri AA
Auto-Matikan: Selepas 5 minit tidak aktif
Berat Barang: Kira-kira 8.8 auns (249 gram)
Dimensi Pakej: 9.92 x 4.84 x 1.61 inci (25.2 x 12.3 x 4.1 cm)

9. Waranti dan Sokongan

For detailed warranty information, please refer to the documentation provided with your purchase or visit the official THIKPO website. If you encounter any issues or require technical assistance, please contact THIKPO customer support through their official channels.

THIKPO TK063