1. Pengenalan
Thank you for choosing the T-SUN Portable LED Work Light. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new work light. Please read this manual thoroughly before use and retain it for future reference.
2. Produk Lebihview
The T-SUN Portable LED Work Light is designed to provide bright, versatile illumination for various tasks and environments. It features high-efficiency LED beads, adjustable brightness levels, and compatibility with Dewalt 20V batteries. Additionally, it includes integrated USB and Type-C charging ports for powering external devices.
- Kecerahan yang tinggi: Up to 5200 Lumens for extensive area coverage.
- Mod Kecerahan Dwi: High (5200 LM, 6-8 hours runtime) and Low (1800 LM, 18-20 hours runtime) for energy conservation.
- Sudut Rasuk Lebar: 120-140° for broad illumination.
- Keserasian Bateri: Designed for use with Dewalt 20V batteries (e.g., DCB201, DCB203, DCB204, DCB205, DCB206). Note: Battery not included.
- Port Pengecasan Dwi: 5V/2.1A USB-A and Type-C outputs for charging phones, tablets, and other electronic devices.
- Pembinaan Tahan Lama: Robust aluminum housing for effective heat dissipation and longevity.
- Kepala boleh laras: The light head can be adjusted to direct illumination precisely where needed.
3. Arahan Keselamatan
To ensure safe operation, please observe the following:
- Always ensure the work light is detached from the battery when not in use to prevent power drain.
- Do not look directly into the LED light when it is on, as this may cause eye damage.
- Jauhkan peranti daripada air dan kelembapan untuk mengelakkan kejutan elektrik atau kerosakan.
- Do not attempt to disassemble or modify the work light. Repairs should only be performed by qualified personnel.
- Use only compatible Dewalt 20V batteries. Using incompatible batteries may damage the device or cause injury.
- Jauhkan daripada kanak-kanak.
- Ensure proper ventilation when operating for extended periods to prevent overheating.
4. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej anda:
- 2 x T-SUN Portable LED Work Lights
- 1 x Manual Arahan (dokumen ini)
5. Persediaan
5.1 Memasang Bateri
- Ensure the work light is switched off.
- Align the grooves on your Dewalt 20V battery with the corresponding slots on the base of the T-SUN work light.
- Slide the battery firmly into place until it clicks, indicating a secure connection.
5.2 Detaching the Battery
- Ensure the work light is switched off.
- Press the battery release button (usually located on the battery itself).
- Slide the battery out of the work light base.
6. Arahan Operasi
6.1 Powering On/Off and Adjusting Brightness
- With a compatible Dewalt 20V battery attached, locate the toggle switch on the back of the work light base.
- Slide the switch to position 'I' for Low Brightness (1800 Lumens).
- Slide the switch to position 'II' for High Brightness (5200 Lumens).
- To turn off the light, slide the switch to the center 'O' position.
6.2 Melaraskan Kepala Lampu
The LED panel is mounted on an adjustable bracket. Gently pivot the light head forward or backward to direct the beam to your desired area. The head offers a flexible angle of up to 140 degrees.
7. Mengecas Peranti Luaran
The T-SUN LED Work Light features a dual charging port for convenience:
- Keluaran USB-A: 5V/2.1A
- Output Jenis-C: 5V/2.1A
To charge an external device:
- Ensure a charged Dewalt 20V battery is securely attached to the work light.
- Locate the USB-A and Type-C ports on the side of the battery adapter.
- Connect your device's charging cable to the appropriate port.
- The red indicator light next to the ports will illuminate when power is being supplied.
8. Penyelenggaraan
- Pembersihan: Wipe the exterior of the work light with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
- Storan: Store the work light in a cool, dry place away from direct sunlight and extreme temperatures. Remove the battery before long-term storage.
- Pemeriksaan: Periodically check for any signs of damage to the housing, LED panel, or battery contacts. Do not use if damaged.
9. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | Battery not properly connected or discharged. | Ensure battery is securely attached. Charge or replace the battery. |
| Keluaran cahaya adalah malap. | Low brightness mode selected or battery is low. | Switch to high brightness mode. Charge or replace the battery. |
| External devices not charging. | Battery discharged or cable/device incompatibility. | Ensure battery is charged. Check cable and device compatibility. |
| Cahaya berkelip-kelip. | Loose battery connection or low battery charge. | Re-seat the battery. Charge or replace the battery. |
10. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | TS-F0120-60-DW |
| Output Cahaya (Maks) | 5200 Lumen |
| Wattage | 52 Watt |
| Suhu Warna | 6000 Kelvin (Putih Sejuk) |
| Sudut Rasuk | 120-140 Darjah |
| Sumber Kuasa | Battery Powered (Compatible with Dewalt 20V batteries) |
| Output USB | 5V/2.1A (USB-A & Type-C) |
| bahan | Acrylonitrile Butadiene Styrene (ABS), Aluminum, Glass, Plastic, Polycarbonate (PC) |
| Dimensi (L x W x H) | 4.13" x 3.86" x 5.8" |
| Berat badan | Varies with battery attached |
11. Waranti dan Sokongan
The T-SUN Portable LED Work Light comes with a Waranti pengilang selama 2 tahun. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or normal wear and tear.
For warranty claims or technical support, please contact T-SUN customer service through the retailer where the product was purchased or visit the official T-SUN webtapak untuk maklumat hubungan.