PUTORSEN Triple Monitor Mount EMPT09-C036P-35B Instruction Manual

1. Pengenalan

Thank you for choosing the PUTORSEN Triple Monitor Mount EMPT09-C036P-35B. This heavy-duty monitor mount is designed to provide a stable and adjustable solution for multi-screen workstations, supporting up to three monitors, each up to 35 inches in size and weighing up to 12 kg (26.4 lbs). It features fully articulating gas spring arms for precise positioning and includes options for both desk clamp dan pemasangan grommet.

2. Maklumat Keselamatan

• Baca semua arahan dengan teliti: Ensure you understand all assembly and installation steps before proceeding.
• Kapasiti Berat: Do not exceed the maximum weight capacity of 12 kg (26.4 lbs) per arm. Exceeding this limit may result in instability and potential damage.
• Saiz Monitor: Dudukan ini direka bentuk untuk monitor antara 17 dan 35 inci.
• Ketebalan Meja: Ensure your desk meets the required thickness for the chosen mounting method (Clamp: 10-45mm; Grommet: 10-40mm).
• Keserasian VESA: Verify your monitors have VESA mounting patterns of 75x75mm or 100x100mm.
• Perhimpunan: Pasang produk di atas permukaan yang lembut dan bersih untuk mengelakkan calar.
• Pelarasan Spring Gas: Adjust the gas spring tension only after the monitor is mounted to prevent the arm from springing up or down unexpectedly.
• Kanak-kanak: Jauhkan bahagian kecil daripada kanak-kanak.

3. Kandungan Pakej

Please verify that all components are present before beginning assembly. Refer to the parts list in your physical manual for detailed identification.

Rajah 3.1: All components included in the package. This diagram illustrates the various parts such as the main pole, gas spring arms, VESA plates, desk clamp, grommet base, and hardware.

4. Spesifikasi

Rajah 4.1: Detailed specifications and dimensions of the monitor mount, including VESA patterns, weight capacity, and desk compatibility for clamp dan pemasangan grommet.

5. Persediaan dan Pemasangan

Follow these steps to properly install your PUTORSEN Triple Monitor Mount.

5.1 Choose Your Mounting Method

The mount supports two installation methods: C-clamp or grommet mount. Select the method suitable for your desk.

• C-Clamp Pemasangan: Pasangkan C-clamp to the edge of your desk. Ensure the desk thickness is between 10mm and 45mm. Tighten the clamp securely to prevent movement.
• Pemasangan Grommet: If your desk has a grommet hole (10mm-60mm diameter) and a thickness between 10mm and 40mm, use the grommet base. Secure the base through the hole using the provided hardware.

5.2 Assemble the Pole and Arms

1. Attach the main pole to your chosen desk base (C-clamp atau grommet).
2. Slide the gas spring arms onto the main pole. The arms can be positioned at desired heights. Secure them using the provided collars and screws.

5.3 Attach Monitors

1. Attach the VESA plates to the back of each monitor using the appropriate screws (M4x12, M4x30, M5x12, M5x30). Ensure the screws are tightened securely but do not overtighten.
2. Carefully slide the monitors (with VESA plates attached) onto the gas spring arms. Ensure they click into place or are secured with the locking mechanism.

Rajah 5.1: The triple monitor mount with monitors installed, demonstrating the gas spring arms and support for up to 35-inch screens.

6. Pengendalian dan Pelarasan

The PUTORSEN Triple Monitor Mount offers extensive adjustability for optimal viewkeselesaan.

6.1 Pelarasan Ketegangan Spring Gas

After mounting your monitors, you may need to adjust the gas spring tension to ensure the arms hold the monitors in place without sagging or floating. Use the included Allen key to turn the adjustment screw on each arm:

• pusing mengikut arah jam (-) to decrease tension for lighter monitors.
• pusing lawan arah jam (+) to increase tension for heavier monitors.

Adjust gradually until the monitor stays at the desired height when released.

6.2 Kedudukan Monitor

Each arm allows for independent adjustment:

• Pelarasan Ketinggian: Move the arms up or down along the main pole, or use the gas spring mechanism for vertical movement.
• Condong: Adjust the monitor screen vertically by tilting it up or down (±35°).
• Pusing: Rotate the monitor horizontally left or right (±90°).
• Putaran: Rotate the monitor 360° for portrait or landscape orientation.

Rajah 6.1: Demonstrating the full range of motion including tilt, swivel, and 360-degree rotation for optimal monitor positioning.

6.3 Pengurusan Kabel

Utilize the integrated cable management clips along the arms and pole to route and organize your monitor cables. This helps maintain a clean and clutter-free workspace.

Rajah 6.2: Integrated cable management system for a tidy setup.

7. Penyelenggaraan

Penyelenggaraan berkala memastikan ketahanan dan operasi yang selamat pada dudukan monitor anda.

• Pembersihan: Lap pelekap dengan lembut, damp kain. Elakkan pembersih atau pelarut yang melelas.
• Pemeriksaan Berkala: Periksa semua skru dan sambungan secara berkala untuk memastikan ia kekal ketat. Ketatkan semula jika perlu.
• Gas Spring Check: If monitors begin to sag or drift over time, re-adjust the gas spring tension as described in Section 6.1.

8. Penyelesaian masalah

If you encounter issues with your monitor mount, refer to the following common problems and solutions:

9. Waranti dan Sokongan

9.1 Maklumat Waranti

This PUTORSEN Triple Monitor Mount is covered by a Waranti 10 tahun from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

9.2 Sokongan Pelanggan

For technical assistance, warranty claims, or any questions regarding your PUTORSEN product, please contact our customer support team. Refer to the contact information provided in your product packaging or visit the official PUTORSEN webtapak untuk butiran sokongan.

Sumber Dalam Talian: For additional information, FAQs, and video tutorials, please visit the PUTORSEN Store on Amazon.