pengenalan
This manual provides detailed instructions for the assembly, operation, and maintenance of your Huuger 47.2 Inch Entryway Table. Please read this manual thoroughly before assembly and use to ensure proper setup and longevity of your product. Keep this manual for future reference.
Maklumat Keselamatan
Adhere to the following safety guidelines during assembly and use:
- Pastikan semua bahagian ada dan tidak rosak sebelum memulakan pemasangan.
- Pasang meja di atas permukaan yang lembut dan bersih untuk mengelakkan calar.
- Jangan ketatkan skru, kerana ini boleh merosakkan bahan.
- Jauhkan bahagian kecil daripada kanak-kanak semasa pemasangan.
- Jangan berdiri atau duduk di atas meja.
- Letakkan meja di atas permukaan yang rata untuk mengelakkannya daripada terbalik.
- Maximum weight capacity for the top surface is approximately 50 lbs (22.7 kg).
- Maximum weight capacity for each lower shelf is approximately 20 lbs (9 kg).
Kandungan Pakej
Sahkan bahawa semua komponen yang disenaraikan di bawah disertakan dalam pakej anda:
- Panel Atas (1)
- Base Panel (1)
- Middle Shelf (1)
- Y-Shaped Metal Frames (2)
- Support Bars for Middle Shelf (2)
- Kaki Boleh Laras (4)
- Pek Perkakasan (Skru, Sepana Allen)
- Manual Arahan (1)
Image: Detailed diagram illustrating all components and their respective dimensions for the Huuger Entryway Table.
Persediaan dan Perhimpunan
Assembly typically takes approximately 30 minutes. A screwdriver is recommended (not included, but an Allen wrench is provided).
- Sediakan Pangkalan: Attach the four adjustable feet to the underside of the Base Panel. Ensure they are securely tightened but allow for minor adjustments later.
- Attach Y-Shaped Frames: Secure the two Y-Shaped Metal Frames to the Base Panel using the provided screws. Ensure the orientation is correct as shown in the diagram.
- Install Middle Shelf Supports: Attach the two support bars for the middle shelf to the Y-Shaped Metal Frames at the designated height.
- Place Middle Shelf: Carefully place the Middle Shelf onto the installed support bars. Secure it with screws if applicable (refer to specific diagram in your package).
- Lampirkan Panel Atas: Align the Top Panel with the top of the Y-Shaped Metal Frames. Secure it using the remaining screws.
- Pelarasan Akhir: Once fully assembled, gently place the table in its desired location. Adjust the feet as needed to ensure the table is stable and level on your floor surface.
Image: Detail showing the stylish metal frame and the thickened base panel with adjustable feet, highlighting stability features.
Operasi dan Penggunaan
The Huuger Entryway Table is designed for versatile use in various indoor settings:
- Pintu masuk/Lorong: Sesuai untuk menyimpan kunci, surat, barang hiasan atau barang kecilamp.
- Ruang Tamu: Can be placed behind a sofa as a console table for books, remote controls, or beverages.
- paparan: Utilize the three tiers for showcasing decorative accents, framed photos, or small plants.
- Kestabilan: Ensure items are distributed evenly to maintain balance. Avoid placing excessively heavy objects on any single point.
Image: The entryway table positioned in a modern home entryway, adorned with a vase of flowers, a statue, and candles.
Imej: Overhed view of the table highlighting its 47.2-inch tabletop and three tiers of storage, displaying books, vases, and other decorative items.
Penyelenggaraan
Proper care will extend the life and appearance of your table:
- Pembersihan: Lap permukaan dengan lembut, damp cloth. Avoid harsh chemicals or abrasive cleaners. The tabletop is water-resistant and scratch-resistant.
- Tumpahan: Clean spills immediately to prevent staining, especially on the faux marble surface.
- Berhabuk: Regularly dust the metal frame and shelves with a dry, soft cloth.
- Pemeriksaan: Periksa semua skru dan sambungan secara berkala untuk memastikan ia kekal ketat. Ketatkan semula jika perlu.
- Elakkan Cahaya Matahari Terus: Prolonged exposure to direct sunlight may cause fading or material degradation over time.
Imej: A terperinci view of the 40mm thick tabletop, emphasizing its durable, water-resistant, and scratch-resistant faux marble finish.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Meja goyah/tidak stabil. | Uneven floor surface; loose screws. | Adjust the leveling feet on the base. Ensure all assembly screws are tightened. |
| Bahagian tidak sejajar semasa pemasangan. | Incorrect orientation of parts; screws not fully loosened. | Review the assembly diagrams carefully. Loosen screws slightly, adjust alignment, then retighten. |
| Scratches on surface after assembly. | Assembly on a rough surface; sharp objects used. | Always assemble on a soft, clean surface. Use appropriate tools. Minor scratches may be buffed with a furniture polish suitable for engineered wood. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Huuger |
| Nombor Model | B0FDKTVQ1Y |
| Dimensi Produk (D x W x H) | 11.18"D x 47.24"W x 31.5"H |
| Bahan Bingkai | logam |
| Jenis Bahan Atas | Engineered Wood (FSC-Certified) |
| Warna Atas | White (Marble Style) |
| Kemasan Perabot | Marble, Gold |
| Ketebalan Atas Meja | 1.57 Inci (40mm) |
| Gaya | Moden, Perindustrian |
| Perhimpunan yang Diperlukan | ya |
| Penggunaan Dalaman/Luar | Dalaman |
| Ciri Khas | Water-resistant, Scratch-resistant, Easy to Clean, Adjustable Feet |
Waranti dan Sokongan
For warranty information or technical support, please contact Huuger customer service through the retailer where the product was purchased. Please have your model number (B0FDKTVQ1Y) and purchase date available when contacting support.
You can also visit the official Huuger store for more information: Kedai Huuger