pengenalan
Thank you for choosing the AEQ Solar Shed Light. This manual provides detailed instructions to ensure proper installation, operation, and maintenance of your 267 LED solar-powered pendant light. Designed for both indoor and outdoor use, this light features motion sensing, remote control, and timer functions, making it ideal for sheds, garages, gazebos, and barns.

Image: The AEQ Solar Shed Light, featuring its unique 5+1 LED panel design.
Persediaan dan Pemasangan
Follow these steps for a successful installation of your solar shed light. No complex wiring is required.
- Buka Pembungkusan Komponen: Carefully remove all items from the packaging. Ensure you have the light unit, solar panel, remote control, and the 16.5-foot connecting wire.
- Choose Solar Panel Location: Select an outdoor location for the solar panel that receives 6-8 hours of direct sunlight daily. This is crucial for optimal charging.
- Panel Suria Gunung: Securely attach the solar panel using appropriate mounting hardware (not included, but typically standard screws/brackets). Adjust its angle to maximize sun exposure.
- Choose Light Unit Location: Hang the light unit in your desired indoor or outdoor area, such as a shed, garage, gazebo, or barn. The light unit features a convenient hook for easy suspension.
- Connect Solar Panel to Light Unit: Connect the 16.5-foot wire from the solar panel to the light unit. Ensure the connection is firm and waterproof.
- Activate Light Unit: Locate the ON/OFF switch on the light unit and slide it to the "ON" position. The light is now ready for remote control operation.

Imej: Selesaiview of the AEQ Solar Shed Light components and features.

Imej: Cthamples of the AEQ Solar Shed Light installed in different environments, demonstrating its versatility and IP65 waterproof rating.
Video: This video demonstrates the installation process and shows the light in various settings.
Arahan Operasi
Your AEQ Solar Shed Light offers flexible operation modes and remote control for convenience.
Fungsi Kawalan Jauh:
- HIDUP/MATI: Press to turn the light unit on or off.
- MODE1 (Motion Sensor Mode): In this mode, the light remains off during the day and night. It will automatically turn on for 120 seconds when motion is detected.
- MODE2 (Always On Mode): The light stays on continuously, whether it is day or night, until the battery power is exhausted.
- Pelarasan Kecerahan: Use the brightness buttons (e.g., 20%, 40%, 60%, 80%, 100%) to select your desired light intensity.
- Timer Settings (Night Only): Set the light to turn off automatically after 1 hour (1H), 2 hours (2H), or 3 hours (3H) during nighttime operation.

Image: Explanation of the two 'All Day Mode' options: Motion Sensor and Always On.

Image: Night Mode operation with 1, 2, or 3-hour timer settings.

Image: Remote control for adjusting brightness and setting timers.
Video: Video ini memberikan penamatview of the solar shed light's features and operational modes.
Penyelenggaraan
Penyelenggaraan berkala memastikan jangka hayat dan prestasi optimum lampu solar anda.
- Pembersihan Panel Suria: Lap permukaan panel solar secara berkala dengan lembut, damp cloth to remove dust, dirt, leaves, or snow. A clean panel maximizes sunlight absorption and charging efficiency.
- Light Unit Inspection: Inspect the light unit and its connecting wire for any signs of damage, wear, or loose connections. Ensure the waterproof connections remain sealed.
- Penjagaan Bateri: The integrated battery is designed for durability. To prolong its lifespan, ensure the solar panel receives adequate sunlight for consistent charging. Avoid prolonged periods of complete discharge.
Menyelesaikan masalah
If you encounter issues with your AEQ Solar Shed Light, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | Suis ON/OFF dimatikan. Caj solar tidak mencukupi. Sambungan longgar. | Ensure switch is "ON". Allow 6-8 hours direct sunlight charging. Periksa semua sambungan kabel. |
| Alat kawalan jauh tidak berfungsi. | Suis lampu dimatikan. Bateri alat kawalan jauh lemah/mati. Obstruction or out of range. | Ensure light switch is "ON". Gantikan bateri jauh. Point remote directly at light within 3-20 ft. |
| Insufficient brightness or short operating time. | Solar panel dirty/obstructed. Low brightness setting. Masa pengecasan tidak mencukupi. | Clean solar panel; ensure full sun exposure. Adjust brightness via remote. Ensure 6-8 hours of direct sunlight charging. |
| Motion sensor not activating. | Mod salah dipilih. Sensor terhalang. | Ensure MODE1 (Motion Sensor Mode) is selected. Clear any obstructions from the sensor. |
Spesifikasi
Key technical details for the AEQ Solar Shed Light (Model AE005):
- Jenama: AEQ
- Nombor Model: AE005
- Sumber Cahaya: 267 manik LED
- Suhu Warna: 6500K (Cahaya Putih)
- Kecerahan: 1200 Lumen
- Reka bentuk Panel: 5+1 LED panels, 120° adjustable angle
- Solar Panel Charging Time: 6-8 jam (cahaya matahari langsung)
- Masa Operasi: 8-20 hours (depending on mode/brightness)
- Penilaian Kalis Air: IP65
- Panjang kabel: 16.5 kaki
- Kaedah Kawalan: Alat Kawalan Jauh
- Mod: 2 All-Day Available Modes (Motion Sensor, Always On)
- Pilihan Pemasa: 1H/2H/3H (night only)
- Tahap Kecerahan: 5 tahap laras
- Dimensions (Light Unit): 15.5" x 15.5"
- Bahan: plastik
- Komponen yang Disertakan: Alat Kawalan Jauh
Maklumat Waranti
The AEQ Solar Shed Light (Model AE005) comes with a Waranti pengilang 1 tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for any warranty claims.
Sokongan Pelanggan
For further assistance, technical support, or to inquire about warranty services, please contact AEQ customer support. You can typically find contact information through the retailer's platform where you purchased the product or by visiting the official AEQ webtapak.