Redodo 12V/24V 150A Adjustable Battery Dual Isolator (VSR) User Manual

1. Pengenalan

The Redodo 12V/24V 150A Adjustable Battery Dual Isolator (VSR) is designed to manage two battery systems, ensuring your starting battery remains charged while allowing auxiliary batteries to power accessories. This device automatically connects and disconnects batteries based on voltage thresholds, providing efficient power distribution and protection.

Ciri-ciri utama termasuk:

• vol. boleh larastage settings for 12V or 24V systems, compatible with lithium (LiFePO4) and lead-acid batteries.
• Built-in LCD display for real-time voltage dan pemantauan semasa.
• Emergency reverse charge switch for starting the engine from the house battery.
• Multi-layered safeguards: over-voltage, over-temperature, and reverse-current protection.
• Compact design for easy installation in various vehicles and marine systems.

Image 1: The Redodo 12V/24V 150A Adjustable Battery Dual Isolator. This image shows the compact black unit with an LCD display and connection terminals.

2. Apa yang ada di dalam Kotak

Selepas membongkar, sila sahkan bahawa semua komponen ada:

• 1x Redodo 12V/24V 150A Adjustable Battery Dual Isolator
• 1x Manual Pengguna
• Skru Pemasangan 4x

Image 2: Contents of the product box, including the battery isolator, user manual, and mounting screws.

3. Produk Lebihview dan Kawalan

Biasakan diri anda dengan komponen dan kawalan peranti:

Image 3: Labeled diagram of the Redodo Battery Isolator showing the LCD display, power button, adjustment buttons, set/enter button, and reverse charge button.

• Butang Kuasa: Menghidupkan atau mematikan unit.
• Butang Anak Panah Atas: Used to navigate previous choices or increase values during setting adjustments.
• Butang Anak Panah Bawah: Used to navigate next choices or decrease values during setting adjustments.
• Set/Enter Button: Confirms selections or enters setting modes.
• Reverse Charge Button: Activates the emergency reverse charge function. When pressed, the house battery will charge the starting battery for 60 seconds if its voltage is higher, enabling emergency engine start.
• Paparan LCD: Menunjukkan vol masa nyatatage and current. When connected, it alternates between voltage and current every second. When disconnected, short press the Set/Enter button to cycle through the voltages.

4. Pemasangan

Proper installation is crucial for the safe and efficient operation of your dual battery isolator. This device is suitable for RVs, marine vessels, trucks, and off-road vehicles.

Imej 4: Cthamples of versatile applications for the Redodo Battery Isolator, including RVs, marine boats, trucks, and off-road vehicles.

4.1. Diagram Pendawaian

The following diagram illustrates a typical wiring setup for the Redodo Dual Battery Isolator:

Image 5: A detailed wiring diagram showing the connection of the alternator, starting battery, adjustable dual battery isolator, house battery, fuse, DC load, and ground.

1. Connect the alternator to the starting battery.
2. Connect the starting battery to one terminal of the Adjustable Dual Battery Isolator.
3. Connect the house battery to the other terminal of the Adjustable Dual Battery Isolator.
4. Ensure a fuse is installed between the alternator/starting battery and the isolator, and between the house battery and any DC loads.
5. Connect the ground wire from the isolator to a common ground point.
6. The Adjustable Dual Battery Isolator automatically connects/disconnects based on the starter battery voltage.
7. When connected, the starter and house batteries charge in parallel.
8. When disconnected, the starter and house batteries discharge separately.

4.2. Pemasangan

Mount the isolator in a secure, dry location away from direct heat or excessive vibration. Use the provided mounting screws to fix the unit firmly.

5. Arahan Operasi

5.1. Kuasa Awal Hidup

After installation, press the Power Button to turn on the unit. The LCD display will illuminate, showing the current voltage and cycling through voltage and current readings if connected.

5.2. Memantau Status Bateri

Image 6: Close-up of the LCD display showing real-time voltage and current tracking. The display alternates between voltage and current every second when connected.

The built-in LCD display provides real-time information:

• Keadaan Bersambung: The display will alternately show voltage and current every second.
• Disconnected State: Short press the Set/Enter button to cycle through the voltages of both batteries.

5.3. Melaraskan Voltage Ambang

The isolator features adjustable voltage settings to accommodate various battery types (e.g., LiFePO4, lead-acid) and system voltages (12V/24V). Refer to the detailed settings menu in the full manual for specific instructions on how to enter programming mode and adjust connect/disconnect voltages using the Up/Down and Set/Enter buttons.

Image 7: The Redodo Battery Isolator is compatible with various battery types, including SLA, GEL, FLD, and LiFePO4 (LI) batteries.

5.4. Emergency Reverse Charge

In an emergency, if your starting battery is depleted, you can use the house battery to assist in starting the engine:

1. Ensure the house battery has sufficient charge.
2. Press the Reverse Charge button.
3. The house battery will charge the starting battery for 60 seconds.
4. Attempt to start the engine within this 60-second window.

6. Penyelenggaraan

The Redodo Battery Dual Isolator is designed for minimal maintenance. Regular checks include:

• Periksa semua sambungan pendawaian secara berkala untuk memastikan ia selamat dan bebas daripada kakisan.
• Pastikan unit bersih dan bebas daripada habuk atau serpihan.
• Pastikan pengudaraan yang mencukupi di sekeliling unit untuk mengelakkan terlalu panas.

No user-serviceable parts are inside the unit. Do not attempt to open or repair the isolator yourself.

7. Penyelesaian masalah

If you encounter issues with your Redodo Battery Dual Isolator, consider the following common troubleshooting steps:

• Tiada Paparan/Tiada Kuasa:
  • Periksa semua sambungan kuasa dan fius.
  • Pastikan butang kuasa ditekan.
  • Sahkan vol. bateritage is within the operating range (12V/24V).
• Batteries Not Connecting/Disconnecting:
  • Sahkan bahawa voltage thresholds are set correctly for your battery type and system voltage.
  • Semak voltage of both batteries; the VSR will only connect when the starting battery reaches the set connect voltage.
  • Inspect wiring for loose connections or damage.
• Terlalu panas:
  • Ensure the unit is mounted in a location with sufficient airflow.
  • Check for excessive current draw or short circuits in the system.

For persistent issues, please contact Redodo customer support.

8. Spesifikasi

Image 8: Visual representation of the safety protections: over-voltage, over-temperature, and reverse-current protection.

9. Waranti dan Sokongan

9.1. Maklumat Waranti

The Redodo 12V/24V 150A Adjustable Battery Dual Isolator comes with a Jaminan 5 tahun from the date of purchase, covering defects in materials and workmanship under normal use. This warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

9.2. Sokongan Pelanggan

For technical assistance, warranty claims, or any questions regarding your product, please contact Redodo customer support. We aim to provide a 24-hour response to all inquiries.

You can find contact information on the official Redodo webtapak atau melalui platform pembelian anda.

• Redodo Official Webtapak: www.redodo.com